Note: groups.io will be down for maintenance this evening, starting at 11pm Pacific Time (6am Tuesday 8/3/2020 UTC), for up to two hours.
Re: ADV: Re: ADV: Re: ADV: Re: [HilltopperKit] Hilltopper 40 problem....HELP!!
OK Jim here goes .... I had been looking at this thing for 3 weeks trying to see what was wrong. We had our builders club meeting and Joe (W0MQY) was working on his HT-40 so Bill (WB0LXZ) offered to help me trouble shoot. Bill wasn’t really all that familiar with the kit but was very good with schematics. We checked all of the voltages and so on and everything was checking out but it still wouldn’t work. Gave up for the evening and a couple of days later I was talking to Joe and he said his 40 was working great. He offered to take a look at mine and see what he could do with the scope. I said I would be right over, warm up the scope. Got over there and he took one look at the board and he said “I know what’s wrong with it”. I said “ how’s that?” He said “you’re Si5351 board Is is upside down”.toggle quoted messageShow quoted text
Moral of the story, Always read the directions even if you have built one before that works and a fresh pair of eyes never hurts. Never get to old to learn.
So if someone tells you all the voltages check on the schematic and all the parts are in the right place tell them to turn over the Si5351 board! Hi Hi
Jack .... WD0CFH
Jack R. Dock ... How about we give GOD a reason to continue blessing America? In defense of America I pledge my life, my fortune and my sacred honor.
War does not determine who is right, only who is left.
On Feb 27, 2019, at 2:31 PM, Dave Benson <davek1swl@...> wrote: