Re: Hilltopper 40m firmware
Charles W. Powell
Martin,toggle quoted messageShow quoted text
I don’t have a “fix” for this, but I had that happen with a chip I substituted, where the frequency was off by a considerable amount. As I recall, I did not end up using that chip, but apparently there is a bit that is set that puts the frequency off by a substantial amount.
Of note, if you flash the original chip with new firmware after the initial configuration is set, all those settings will be saved (frequency correction, iambic A or B, and paddle reverse).
Dave, K1SWL, who wrote the original code may have a “quick” correction or be able to give you advice on this problem.
Chas - NK8O