Re: Hilltopper 20 Receiver portion

Charles W. Powell

Q1, the BS170, is the T/R mute FET.  I have had two of these that didn’t do what they were supposed to do.  Easy check: Remove Q1.  If the receiver comes to life, you have found the problem.  Replace it and you should be good to go.


Chas - NK8O

On Jun 23, 2019, at 2:35 PM, Eric Holzapfel <ewholz@...> wrote:

Hello Group,
finished my hilltopper 20. But on first pwr up, blew the two (C29,C30) 100mf caps!
I replaced the caps, and the AtMega328 and the SE55? audio chip, but really can
hear no signals on the receiver. The unit seems to function, beeps freq, and transmits file.
Transmitted using a 20 m 1/2w dipole. The xmit sig sounds file a few hundred feet away.

But sadly the receiver seems not to work well. Are there any other parts that
you can suggest changing?


Join to automatically receive all group messages.