Date
1 - 5 of 5
[4SQRP] Hilltopper mods - 'how to get them'
Dave Benson
folks- At this point, I've shipped all but two mod sets for the Hilltopper. Parts are due in today and then I can ship those. About 20 sets have gone out. I was surprised to discover that most of the padded mailers shipped as 'large envelope' rather than 'parcel'. That put the postage cost at $1.00 instead of almost $4. Feel free to email me directly (below) to request a refund of the overage. Otherwise, consider it a contribution to my 'project fund'. I won't mind. 73- Dave Benson, K1SWL davek1swl at gmail.com ---------- Forwarded message --------- From: Dave Benson via Groups.Io <davek1swl=gmail.com@groups.io> Date: Mon, Mar 25, 2019 at 4:28 PM Subject: [4SQRP] Hilltopper mods - 'how to get them' To: <main@4sqrp.groups.io>, <HilltopperKit@4sqrp.groups.io> gang- As my original post mentioned, fixes 1) and 2) are free for the asking. Please contact me directly for these: davek1swl at gmail.com ----------------------- The price for all three is $7 via Paypal (A check's fine too) The big difference is the need for a padded mailer, po$tage and Paypal fee- those alone add up to $5. For this flavor: Paypal to my e-mail address above. ----------------------- I'll be able to ship later this week- I've just reordered parts 73- Dave, K1SWL _._,_._,_
|
|
KB9BVN - <kb9bvn@...>
Dave, Thank you very much for doing this. I already loved my HT20 but after the mods, it's even better. Indiana Fireflies QRP Group met for Pizza last night and we were talking about how great the 4 States kits have been. Outdoor Ops Season is almost here in Indiana....where it's 70 today and snowing tomorrow. Every day can be field day! de KB9BVN Brian Murrey
On Thu, Apr 4, 2019 at 5:40 AM Dave Benson <davek1swl@...> wrote:
--
73 de KB9BVN Brian Murrey
|
|
Dave Benson
Thanks, Brian! I was portable for the afternoon CWT sprint yesterday- 17 contacts on 20 and 40M. The ground's bare on south-facing slopes but still a foot of snow in the shade. It's still a bit early for outdoor ops here in NH, but you take opportunities when they arise. Upper 50s and mostly sunny when I set up. It was down to 50F, overcast and winds gusting 35 by the time I packed up. 73- Dave, K1SWL
On Thu, Apr 4, 2019 at 7:47 AM KB9BVN - <kb9bvn@...> wrote:
|
|
Bob Zolecki
Hi Dave
Put my money in ur "project fund" .
73 de Bob Z KR9Z
-----Original Message----- From: Dave Benson <davek1swl@...> To: HilltopperKit <HilltopperKit@4sqrp.groups.io> Sent: Thu, Apr 4, 2019 5:40 am Subject: [HilltopperKit] [4SQRP] Hilltopper mods - 'how to get them' folks-
At this point, I've shipped all but two mod sets for the Hilltopper. Parts are due in today and then I can ship those. About 20 sets have gone out.
I was surprised to discover that most of the padded mailers shipped as 'large envelope' rather than 'parcel'. That put the postage cost at $1.00 instead of almost $4. Feel free to email me directly (below) to request a refund of the overage. Otherwise, consider it a contribution to my 'project fund'. I won't mind.
73- Dave Benson, K1SWL
davek1swl at gmail.com
---------- Forwarded message ---------
From: Dave Benson via Groups.Io <davek1swl=gmail.com@groups.io> Date: Mon, Mar 25, 2019 at 4:28 PM Subject: [4SQRP] Hilltopper mods - 'how to get them' To: <main@4sqrp.groups.io>, <HilltopperKit@4sqrp.groups.io> gang-
As my original post mentioned, fixes 1) and 2) are free for the asking.
Please contact me directly for these: davek1swl at gmail.com
-----------------------
The price for all three is $7 via Paypal (A check's fine too) The big difference is the need for a padded mailer, po$tage and Paypal fee- those alone add up to $5.
For this flavor: Paypal to my e-mail address above.
-----------------------
I'll be able to ship later this week- I've just reordered parts
73- Dave, K1SWL
|
|
Ron K0OXB
Hello Dave,
toggle quoted messageShow quoted text
|
|