Hilltopper30 parts differences
Hello Dave, Chas, and the group.toggle quoted message. . .
From the schematic of the Hilltopper30 you sent me and I posted to the files section:
C1 = 47pf C0G
C2 = 220pf C0G
C3 = 68pf C0G
L1 = 5.6uh Mouser 542-78F5R6J-RC
L2 = 4.7uh Mouser 542-78F4R7J-RC
L6 = T37-6 (yellow) 14 turns
L7 = T37-2 (Red) 14 Turns
I assume L6 and L7 uses #24AWG wire but it is not specified on the schematic.
On 12/4/2018 4:16 AM, Dave Benson wrote:
Charles W. Powell
I'm starting construction on mine right now. I probably will have to wait to get the parts that are not in the kit, but I can have the board ready for everything by then. I'll be smart too and reprogram the controller chip before I put it in place this time!
Chas - NK8O