Hilltopper30 parts differences

Jim Pruitt

Hello Dave, Chas, and the group.

From the schematic of the Hilltopper30 you sent me and I posted to the files section:
C1 = 47pf C0G
C2 = 220pf C0G
C3 = 68pf C0G
L1 = 5.6uh   Mouser 542-78F5R6J-RC
L2 = 4.7uh   Mouser 542-78F4R7J-RC

L6 = T37-6 (yellow)  14 turns
L7 = T37-2 (Red)     14 Turns

I assume L6 and L7 uses #24AWG wire but it is not specified on the schematic.

Thank you.

Jim Pruitt

On 12/4/2018 4:16 AM, Dave Benson wrote:

I don't remember the values for 30M.  It's a 'losing one's mind' thing.

- Dave

On Mon, Dec 3, 2018 at 7:32 PM Charles W. Powell via Groups.Io <> wrote:
  Guess I should see what I need for the 30 meter conversion.  That may be the right part for 30?


Chas - NK8O

Charles W. Powell

I'm starting construction on mine right now.  I probably will have to wait to get the parts that are not in the kit, but I can have the board ready for everything by then.  I'll be smart too and reprogram the controller chip before I put it in place this time!


Chas - NK8O