Here are several easy mods to improve Hilltopper performance. They address audio levels and quality.
1) 'Loud sidetone':
The value of R8 (now 22k) can be increased to 47K to 100K. (This change has been posted before, but it's worth including in this summary )
2) 'Low audio'
The values of R5 (150K) and C22 (470 pF) may be changed to 330K and 220 pF respectively. This yields a gain increase of 6 dB without affecting that stage's rolloff characteristic.
These two components are in 'tight quarters'- between U3 and the pushbutton switch. Cutting one or both component leads and tacking the new components on the underside of the board makes the change much easier.
But wait- there's more!......
As some of you have noted, there's a 'screech' on loud CW signals- it necessitates riding the gain control. I evaluated samples of a more robust op-amp- the NJM4556AD.
3) Replacing the NE5532P with that new device eliminates the screech. You'll hear some distortion when limiting occurs, but it's much less objectionable than the NE5532's rude noises. Its 'limiting' threshold is also about 6 dB higher than the present device. The net result of this change, combined with 2) above, is 6 dB more audio without the rudities (that's a word!).
Note that if you increase the gain without replacing the IC, you'll find yourself riding the gain control more often
Here's the deal:
If you'd like parts for fixes 1) and 2), simply send me your address and I'll drop them in the mail to you.
I can provide the NJM4556AD as well, but I'd need to charge for it at my cost. Most of that is postage- nearly $4 for a 'non-flat' mailing these days. This part is also readily available through Digikey and Mouser.
73- Dave Benson, K1SWL
email: davek1swl at gmail.com
Charles W. Powell
Dave,toggle quoted messageShow quoted text
The chip is a ‘drop in’ replacement for the current chip? Send me one and I will send you the cost by PayPal. Looks to me like both mods, 6 dB + 6 dB makes 12 dB all together. That should turn the RF gain down considerably!
I’ve already done the sidetone mod, and it is great.
Another side note: I don’t know why, but with changing the center frequency and sidetone to 600 Hz, I don’t note any loss. In fact, if the station is offset to 800 Hz, I note it to be quite a bit down from moving it to my center frequency. I used the Hilltopper 40 exclusively while I was out of town last week so I had time to get some empiric data on performance.
Let us know the total cost for the chip and postage. Throw in R5 and C22 and I’ll replace those in as well.
Chas - NK8O