Re: ss 40 rx tx


Jim Kortge
 



On 4/11/2016 1:05 PM, kb0qpm@... [4sqrp] wrote:
The TPC- 41 is listed as 5 370 x 2 059 x 4 144 �OK....oops. Thought it would work.
TPC- 41= 5.370 x 2 059 x 4 144 �vs�6" x 2 "x 4" ( I was concerned about the depth)
the rx board is about�5.25 x 4 the, ten tec TPC 41 is .059 taller than the ebay enclosure.

But the TP-41 was recommended for the Rx board only, not the stack.

How tall is the rx / tx�assembly ?

The assembly needs at least 2 1/2 inches of height to fit in and 2 3/4 is probably better so there is some additional volume above the PA on the Tx board for cooling.

72,

Jim, K8IQY

Join main@4SQRP.groups.io to automatically receive all group messages.