toggle quoted messageShow quoted text
Are you using the Code Plug Manager that came with the radio? If so, here are the basics.
Make a copy of what is actually on the radio as a starting point and save it. Anytone recommends this.
Then program in the following order:
- Go to the left menu, Digital and select Radio ID list. Under Radio ID type in your DMR ID number. Under Name type your call sign. Double click on a line to edit it. If you have 1 ID and 1 call sign, you will only have 1 entry.
- Go to the next menu item under Digital and select Talk Groups. Double click the first line. Under Name, type 4-State QRP, Type: select Group Call, TG/DMR ID: 31654, then click OK.
- Go to the top of the list and select Public. Then select Channel. Double click the first line or any line you would like to use. Name: 4-State QRP. Receive/Transmit frequency depend on whether you are using a hotspot or repeater. I recommend setting your hotspot to 434.0000. So if hotspot 434.0000 for both or the repeater pair. Channel Type: D-Digital. Transmit power: Low for hotspot, High or Turbo for repeater. Bandwidth: 12.5K, TX permit: Always. Scan list: None, then to the right, click on the bar for Contact and select 4-State QRP, Radio ID: select your callsign, Color Code: Depends on the repeater or on the one you selected for your hotspot. I usually leave Color Code 1 for my hotspot and use that on the radio as well, Slot: Depends on repeater owner’s preference. If using a Zumspot it will be Slot2. Receive group list: doesn’t matter. Leave Digital Encryption: Off, and Encryption Type: Normal Encryption. Everything below this point is left unchecked or left alone. Click “OK”
- Go to the next Menu Item Zone. Double click the first line or any line. Zone Name: Hotspot or Local Repeater. Select from the Available Channels on the left 4-State QRP and then click the arrow in the middle of the columns to select and move that to the right. Click “OK”
You are now ready to upload to the radio. Select the menu option at the top, Program: Write to radio. Once that is done, you should have a radio that can access the 4 State QRP Talkgroup.
- Even if your drivers are installed you probably have to Set menu option and select the port. The program uses a virtual com port that does not stay in the program memory.
- When you add other talk groups, you use exactly the same procedure
- To see what your radio is doing/how it is working, use TG 9990 Brandmeister Parrot. Use PRIVATE CALL when setting up the Digital Contact
- To talk to a particular individual by DMR ID it is also a PRIVATE CALL
- Suggested TGs: 91 Worldwide, 310 TAC 310, 311 TAC 311, 31075 Baynet (Hamradio Workbench), 4640 to 4649 Corresponds to US call areas 4640 = Call Area 0 and 4649 = Call Area 9, etc., 3120 Kansas Statewide.
- If you are using a local repeater, be sure it is Brandmeister. DMR-Marc and other C-bridge systems WILL NOT WORK to access Brandmeister, the only open source system.
When you have this done and the radio is operational, then let me know and I will send instruction on loading the User Database. The 868/878 will hold the entire world-wide user database, at least so far.
Let me know if you have any questions.
Charles - NK8O
I have not yet figured out how to program my new anytone 878 to do this net I listened some on hose. Open to suggestions N9EGT Waynesteury@...Wayne Steury IPhone
On Dec 5, 2018, at 10:38 PM, Robert <e1dslr@...> wrote:
ANOTHER GREAT NET TONIGHT THANKS TO ALL OF THE CHECK INS