Re: working on alignment hilltopper 20

Dave Benson


Your frequency counter connects to the center pin of the BNC connector (J1). The counter's ground lead can be clipped to the BNC connector's shell.

When you power up with the jumper installed, the Hilltopper transmits for 5 seconds. During that time, you turn the tuning knob to bring the frequency to 14060 kHz.

-  Dave, K1SWL

On Tue, Jan 29, 2019 at 7:40 PM KM6KJE <terry.schulz@...> wrote:
I was wondering what the center pin was to hook up a frequency counter to the section is alignment the CAL placement pin has only two pins  thanks

Join to automatically receive all group messages.