Re: Hilltopper 40
Dave Benson
Terry- What- if anything- does work? Morse readout on power up? If the Function switch polarity is OK (normally open), you might check this: Is power getting to the ATmega328? Pin 7 should be somewhere between 4 to 5 volts DC. 73- Dave, K1SWL
On Sun, Mar 3, 2019 at 2:40 PM KM6KJE <terry.schulz@...> wrote: Hilltoppers 40 not keying at startup nor keying at any other time any troubleshooting suggestions thanks
|
|