Re: Dummy Load Antenna
Dwayne R <masterdr@...>
that isn't a dummy load. . that is a full fledged antenna. . .toggle quoted messageShow quoted text
The 50 ohm is used to insure a impedance match to the transmitter.
you can do the same thing with very large loops. . .. measuring the
resistance of the wire per 100 feet, and building an antenna that is
long enough to equate to 50 ohms. . . .
No tuner needed. . .
On Sun, 3/24/19, Charles W. Powell via Groups.Io <email@example.com> wrote:
Subject: Re: [4SQRP] Dummy Load Antenna
To: "4 State QRP" <main@4SQRP.groups.io>
Date: Sunday, March 24, 2019, 12:35 PM
On Mar 24, 2019, at 12:31 PM, Johnny
Gm Charles Terry used to have a link to a dummy
load antenna, but the one I found is Broken?Maybe someone else has a better
On Sun, Mar 24,
2019 at 10:54 AM Charles Wells <odu1993@...>
I was looking at the Ozarkcon Dummy
Load Special Antenna with an eye toward assembling same.
I'm slightly confused about some details.
interpretation is that one end of the zip cord is soldered
together so that the total length of the radiator is 40
ft. One end is then connected to the BNC ground and the
other to the resistive load. Is this interpretation
Thanks for your help.
Check out the
4SQRP website at 4sqrp.com