Re: nouveau 75 Dave Cripe/Voltage Checks

nm0s_qrp <ai9e_qrp@...>

In the receive mode, all three of these MOSFETS should have no drive, i.e. the gate voltages should be close to the source voltage.  Bob, I think you have the voltages measured for Q3 and Q11 swapped, as the drain voltage you report for Q3 is the same as the drain for Q12.
It looks like the gate voltages on Q11 and Q12 are not correct.  I would suspect failure of Q10 or Q13.  These would be the ones I would try replacing.

73 Dave

Join to automatically receive all group messages.