|
Re: Good Day to Build
Ge Dan:
toggle quoted messageShow quoted text
Well here in Ks I fired up the tractor and pushed that pretty white stuff (I could think of a better name?) around for about 2 hours! This winter is getting old! I am ready for some spring WX!!! 72 cu at OZARKCON! Johnny AC0BQ
On Sun, Mar 24, 2013 at 8:29 PM, bcdlr <on30ng@...> wrote:
|
|
|
|
Re: Good Day to Build
Tom Sevart <n2uhc@...>
On 03/24/2013 15:19, WA0ITP wrote:
I just finished my 20M Wilderness SST this weekend. Only took me a couple years to get the time to get it all done. I wanted to get it done in time for Ozarkcon. Now I just need to get an antenna done and find my dummy load. I'll post pics online soon. -- Tom Sevart N2UHC St. Paul, KS
|
|
|
|
Re: Good Day to Build
Well, we finally got it. Seems like we've escaped all the bad winter weather. I don't know how you really measure snow but a ruler my wife stuck into the snow on our deck is rapidly disappearing!
They say we're due for 5 more inches. That would put it at about 17" but I doubt we'll get that much. Problem here is that the city & county don't know how to deal with it when it gets this deep. Wind is horrible. Temperature is 31 F. Supposed to warm up so it won't be around long but while it is! Whoo-wee! Lot's of fender benders and the local authorities have been on TV saying stay home. I fixed the screen on my granddaughter's netbook today. This is the second time I've had to fix it! Ugh... But what are you going to do? I dug out a Taurus SSB that I'm trying to build for 40 meters. Trying to figure out where I left off and trying to verify everything I need to "change" to put it on 40. Looking forward to O'con. We're close now. 73 -- Dan -- KB9JLO PS Had a nice 20 M SSB QSO this afternoon with CT.
|
|
|
|
Re: Good Day to Build
Bill Cromwell
On Sun, 2013-03-24 at 20:27 -0400, Lee Mairs (SAG) wrote:
Do you need to take your shoes off to count that high? (evil grin). 73, Bill KU8H
|
|
|
|
Re: Good Day to Build
Nick-WA5BDU
No snow or ice in central Arkansas, but it was kinda cold and windy. I'm still working on that Argonaut 505 a bit. And trying to fix my daughter's iPod Nano. (Gonna need a stronger jeweler's loupe!)
Yesterday I made a little one transistor oscillator - transmitter for AA1TJ's Vanguard project and today I spent some time CQing with it. 30 mW out on 20 meters. Here's a blog description: http://wa5bdu.blogspot.com/2013/03/vanguard-i-transmitter.html 72- Nick, WA5BDU
|
|
|
|
Re: Good Day to Build
Bill Cromwell
On Sun, 2013-03-24 at 19:00 -0500, n0jrn wrote:
--snip---
Sorry Jerry, I was in the Navy. I'm checking the postage for a sea tuit. If I can find one in the bottom of a junk box... 73, Bill KU8H
|
|
|
|
Re: Good Day to Build
Dale Putnam
oh.. I know.... you shoulda seen me hunting around for a mic to test it with.. I finally had to build one. Have a great day, --... ...-- Dale - WC7S in Wy To: 4sqrp@...; daleputnam@... From: jomatlock@... Date: Sun, 24 Mar 2013 19:49:28 -0500 Subject: Re: [4sqrp] Good Day to Build
Now Dale, you can't use words like SS* on the reflector, the moderator will get ya! 72 Johnny AC0BQ
On Sun, Mar 24, 2013 at 7:42 PM, Dale Putnam <daleputnam@...> wrote:
|
|
|
|
Re: Good Day to Build
Now Dale, you can't use words like SS* on the reflector, the moderator will get ya!
toggle quoted messageShow quoted text
72 Johnny AC0BQ
On Sun, Mar 24, 2013 at 7:42 PM, Dale Putnam <daleputnam@...> wrote:
|
|
|
|
Re: Good Day to Build
Joe Bento
On 3/24/2013 6:27 PM, Lee Mairs (SAG)
wrote:
Working on my PigRig. How can you count turns using #34 wire in a 1/4 inch long binocular core transformer?? And here I bitched about the 1/8 watt resistors... When you fold the wire in half and slip it through both holes, that is one turn. Loop both ends through the opposite holes and you have two turns... etc. Every time the wire passes through both holes is a turn. If you have an even number of turns, your wire ends will exit out the side you began. With a donut toroid, every time the wire passes through the hole is a turn. Joe, N6DGY
|
|
|
|
Re: Good Day to Build
Dale Putnam
I just finished a Survivor (75m ssb, no foolin ssb). And am repairing a K1. It is 14F with no wind (yet) and 2 inches of fluffy dry stuff. Have a great day, --... ...-- Dale - WC7S in Wy To: 4sqrp@... From: n2uhc@... Date: Sun, 24 Mar 2013 19:31:29 -0600 Subject: Re: [4sqrp] Good Day to Build
On 03/24/2013 15:19, WA0ITP wrote:
> > > Looks like it has been a good dat to build all over the 4 state area. > > About 2" here on the ground, none in the streets. Working on installing > an HPM > in an Altoids along with a switch, battery, jacks, and a power > indicating LED. > Kinda tight. > > What's on your bench today? I just finished my 20M Wilderness SST this weekend. Only took me a couple years to get the time to get it all done. I wanted to get it done in time for Ozarkcon. Now I just need to get an antenna done and find my dummy load. I'll post pics online soon. -- Tom Sevart N2UHC St. Paul, KS
|
|
|
|
Re: Good Day to Build
Lee Mairs (SAG) <lmairs@...>
Working on my PigRig. How can you count turns using #34 wire in a
1/4 inch long binocular core transformer?? And here I bitched about
the 1/8 watt resistors...
toggle quoted messageShow quoted text
73 de Lee KM4YY
On 3/24/2013 5:19 PM, WA0ITP wrote:
|
|
|
|
Re: Good Day to Build
n0jrn <n0jrn@...>
An electronic keyer specifically for my Swan 700cx.
toggle quoted messageShow quoted text
Using the Island Keyer II, a small audio amp from Kitsandparts and HamGadgits keying adaptor. Front panel pots for On/Off and volume, weight, tone and speed, as well as momentary switches as required by the keyer. My 700cx sidetone leaves a lot to be desired so desided to build up a keyer with sidetone. Rear panel will have jacks for power, paddles, bug and line out. Working on the screen print now for both panels. Publisher does a good job for that. I've got a PigRig waiting in the wings but this one is the PigRig Plus. Just need to get it going. Doesn't seem like I can get my teeth into that one. It's has 72 seperate roids in it. OUCH.. Makes my fingers hurt just thinking about it. LOL I don't know if a picture will make it through the reflector but I attached one of a previous rig. 60 roids on the filter boards alone. :( I've got all the metal for the encloure waiting. Will someone send me on of those ROUND TO IT's LOL 73 and happy building to all: Jerry N0JRN ----- "WA0ITP" <wa0itp@...> wrote:
Looks like it has been a good dat to build all over the 4 state area.
|
|
|
|
Pig Rig changes
Bob Nelson
When those 7122 crystals start getting out to us, installed and operating:
Are there any other component changes necessary to the frequency change? Thanks, Bob - K6KL
|
|
|
|
Re: Good Day to Build
On 3/24/2013 5:19 PM, WA0ITP wrote:
Looks like it has been a good dat to build all over the 4 state area.You know and the rest of the 4 State gang are probably wishing they did too. Just my way of tweaking interest in the latest goodie from the K8IQY lab. :-) Terry, maybe you could post that picture that I sent you and folks can start guessing what it is? We could turn it into a contest and the first person who figures it out gets a free one when it is ready to go...... 72, Jim, K8IQY
|
|
|
|
Re: Good Day to Build
Hey Terry and the group.
toggle quoted messageShow quoted text
Lots of now here, abt 6 inches with drifts! I am working on a DIZ freqency counter kit. Was going well till I had to stop and push snow! 72 CU at OZARKCON!! Johnny AC0BQ
On Sun, Mar 24, 2013 at 4:19 PM, WA0ITP <wa0itp@...> wrote:
|
|
|
|
Good Day to Build
WA0ITP
Looks like it has been a good dat to build all over the 4 state area.
About 2" here on the ground, none in the streets. Working on installing an HPM in an Altoids along with a switch, battery, jacks, and a power indicating LED. Kinda tight. What's on your bench today? ---------------------------------- I love this radio stuff ! 72 WA�ITP www.wa0itp.com www.4sqrp.com www.qrpspots.com
|
|
|
|
Re: Snow in SE KS
Jeremy Utley
Haven't even tried to dig out here in Iola yet. And my ground-mounted 5BTV won't tune up, so I suspect the snow is covering enough that it's shorting at the feedpoint - oh the troubles of a ground-mounted vertical! Wish I still had my Ultimax 100 in the air, but pulled it down last fall for a special event station and never have raised it again. Oh well, Jeremy, N9PH
On Sun, Mar 24, 2013 at 2:09 PM, PaulS <psmith61@...> wrote:
|
|
|
|
Snow in SE KS
Paul Smith
Hey guys, I am dug out here in Humboldt. I went to the campus with my crew moving snow. There was 6 inches on the flat and some 4 foot drifts. We got most of it cleared and called it a day... I'm going to take a nap and then play radio de Paul N0NBD
|
|
|
|
snow.....yup
Phil Anderson
Same here Johnny.........6 to 10 inches and "they" say more coming....We need the moisture!
Uncle Phil.........see ya at the OZCON!
|
|
|
|
[PolarBearQRP_Ops] March PBMME
Scotty Long <nu0s@...>
Thought I would forward this little adventure from Saturdays Polar Bear Moonlight Madness Event. have a great week everyone... 72/73/Scotty/NUØS
-------- Original Message -------- Subject: [PolarBearQRP_Ops] March PBMME From: Scotty Long <nu0s@...> To: PolarBearQRP_Ops@... CC:
|
|
|