|
Re: Learning KiCad at Ozarkcon
AG1P Ron
Probably an incompatible onboard graphics chip on your laptop or the display won’t do resolution they need. I have itel graphics chip on my older Dell Latitude laptop and it isn’t supported.
72 - Ron - AG1P
From: main@4SQRP.groups.io [mailto:main@4SQRP.groups.io] On Behalf Of wg5f@...
Just finished the download and attempted install.
|
|
|
|
Re: Learning KiCad at Ozarkcon
Just finished the download and attempted install.
It failed. It essentially said it was not compatible with my Windows Laptop... (Older Dell Insprion 1545 with WIN10 upgrade) That doesn't happen to me very often... Maybe it'll work from a USB stick at OzarkCon. 72, -Ed, WG5F-
|
|
|
|
Wednesday Evening 40 and 80 meter Nets - Wed, 04/03/2019 8:00pm-9:00pm
#cal-reminder
main@4SQRP.groups.io Calendar <main@...>
Reminder: When: Where: Organizer: Description:
|
|
|
|
Just a reminder
dekle <dekle@...>
Hidden Oscillators
At the conclusion of the prize drawings on Saturday I’m going to activate 2 small rf oscillators and hide them somewhere in or around the Stonecastle. They will be hidden in “common” areas that are accessible to anyone at any time. Nothing will have to be disassembled and nothing of any major consequence will have to be moved to locate them. They will be stationary and their retrieval will not require you to be in an unsafe situation. The oscillators are set to approximately 7116.59 kHz and 7120.96 kHz. They switch on for about 1.5 seconds and off for about the same amount of time. You will be able to hear them with your cw receiver. (Actually it’s possible to “hear” them with just a portable AM shortwave receiver but during the ‘on’ time it will just quiet the receiver and you won’t get the nice CW note without a BFO). I’ll let them run until someone finds them or until I have to leave on Sunday. The prizes this year will be $50 gift certificates from TAYDA.
Good luck.
73 Bill KV6Z
|
|
|
|
Re: Inexpensive DMR
Thank you David and Jim for the copy of the lastest GD-77 code plug for DMR in the area =) I will distribute the copies around =) MUCH THANKS TO ALL =) -- 73's Pat N5VMO
|
|
|
|
Re: Scotland rescue by radio transmission
davemrtn
Great article but it appears
amateur radio played no part in this event. David Martin - NA1MH - Mountain
Home, Ar.
----------------------------------------- Wherever I go, there He is. Recycle, Reuse, Re-purpose, Repair >Professional Sports - An activity for small minds< !! There is a reason it is called "Sports Trivia" !!
On 4/1/2019 08:59, Walter - K5EST
wrote:
|
|
|
|
Scotland rescue by radio transmission
This is NOT April 1st joke....... A Scottish Mountain Man Was Rescued—After His Distress Signal Was Picked Up in Houston. The distress call was from Scotland. or 73,
|
|
|
|
Re: Inexpensive DMR
Jim Parks
David
Here is my current GD-77 code plug. You will have to put in your name and DMR number. Also notice that it does have a bunch of local LEO and fire/EMS freqs. In it. Just disregard those. Let me know if you have any questions about it. Also it is for a GD-77 with the latest firmware.
73 Jim Parks NY0J
From: main@4SQRP.groups.io <main@4SQRP.groups.io> On Behalf Of N5VMO Pat
Jim Parks NY0J I know you have moved on from the GD-77; but do you have a code plug for the latest version of that radio for KN / MO areas in a file =) There are six of us around here new to DMR that have bought these radios =) Can you help out =)
73's Pat N5VMO
|
|
|
|
Re: Inexpensive DMR
Jim Parks
Hi Chuck, the info for the two DMR repeaters in Branson is as follows:
UHF: 444.45 + Color Code 5 the 4SQRP talkgroup 31654 will be static on Time slot 1. This machine is located about 8 blocks from the hotel and has great hand-held coverage
VHF 147.150 + Color Code 5 the 4SQRP talkgroup 31654 will be static on Time slot 1. This machine is located NE of Branson and the coverage is somewhat less.
I posted a complete code plug for the Anytone 868 on the 4SQRP files section of the group. It is way too big to email.
Let me know if you have any more questions.
73 Jim Parks NY0J
From: main@4SQRP.groups.io <main@4SQRP.groups.io> On Behalf Of Chuck Skolaut via Groups.Io
Jim, On Tuesday, February 19, 2019, 8:25:58 PM UTC, Jim Parks <jim.ny0j@...> wrote:
David,
Glad you for those “sea legs” I know the feeling. I started with a Radioddity GD77, then upgraded to the Anytone 868 and had to learn all over again, but I did it. For what it is worth, I have a great code plug for the Anytone that covers most of the DMR and analog repeaters for the western half of Missouri and I’m willing to share it with anyone who would like it.
73 Jim Parks NY0J
From: main@4SQRP.groups.io <main@4SQRP.groups.io> On Behalf Of davemrtn
Jim, I agree with you on the initial difficulty in understanding how to program DMR radios. I was frustrated to no end when I started playing with a MD-380 and again later with the D868UV, but I kept plugging along, reading and trying things, finding what worked and what didn't. Once I finally got my 'sea legs' so to speak, I am really enjoying what DMR and DMR networks have to offer for communication flexibility realizing of course the networking may not be something that can be relied on in a true disaster. I have become quite comfortable programming codeplugs for the two radios I have. David Martin - NA1MH - Mountain Home, Ar. ----------------------------------------- On 2/19/2019 09:16, Jim Parks wrote:
|
|
|
|
Re: Inexpensive DMR
Jim Parks NY0J I know you have moved on from the GD-77; but do you have a code plug for the latest version of that radio for KN / MO areas in a file =) There are six of us around here new to DMR that have bought these radios =) Can you help out =)
--
73's Pat N5VMO
|
|
|
|
Re: Learning KiCad at Ozarkcon
I’ll try to bring a few memory sticks w/ the download(s) on them...
toggle quoted messageShow quoted text
On Mar 31, 2019, at 6:39 PM, cornhusker via Groups.Io <cornhusker@...> wrote:
-- Jeff N0̷MII
|
|
|
|
Re: Inexpensive DMR
Chuck Skolaut
Jim, Can you send me the DMR info needed to program in the info for DMR operation in the Branson area for Ozarkcon? Someone sent the info several weeks ago but I can't locate it again. Having someone help me set up my Anytone 868 and would like to be able to use it while in the area. 73 and Thanks, Chuck KØBOG
On Tuesday, February 19, 2019, 8:25:58 PM UTC, Jim Parks <jim.ny0j@...> wrote: David,
Glad you for those “sea legs” I know the feeling. I started with a Radioddity GD77, then upgraded to the Anytone 868 and had to learn all over again, but I did it. For what it is worth, I have a great code plug for the Anytone that covers most of the DMR and analog repeaters for the western half of Missouri and I’m willing to share it with anyone who would like it.
73 Jim Parks NY0J
From: main@4SQRP.groups.io <main@4SQRP.groups.io> On Behalf Of davemrtn
Jim, I agree with you on the initial difficulty in understanding how to program DMR radios. I was frustrated to no end when I started playing with a MD-380 and again later with the D868UV, but I kept plugging along, reading and trying things, finding what worked and what didn't. Once I finally got my 'sea legs' so to speak, I am really enjoying what DMR and DMR networks have to offer for communication flexibility realizing of course the networking may not be something that can be relied on in a true disaster. I have become quite comfortable programming codeplugs for the two radios I have. David Martin - NA1MH - Mountain Home, Ar. ----------------------------------------- On 2/19/2019 09:16, Jim Parks wrote:
|
|
|
|
Re: Learning KiCad at Ozarkcon
cornhusker
The Windows version of this software is a 1.1 GB download. Be sure to download it at home and/or on the fastest connection you can get. I am installing it on my laptop. 73 de K0NEB
|
|
|
|
Learning KiCad at Ozarkcon
Hi Everyone, at Ozarkcon this year is a really great chance to learn how to use KiCad for making professional PCB layouts and 3D printing for your cabinets for radio gear! KiCad works for SMD or THT (thru the hole) components, ground planes, and lots of other great features. KiCad is as easy to use for schematic capture, PCB layout and it even gives a 3D rendering of the assembled board. PCB are easy to order direct from China. Download KiCad (see below) and bring along your pc; we'll work on a project together. KiCad now has a push and shove router which is capable of routing differential pairs and interactively. tuning trace lengths. 3D printing is a very cool new technology that kids are learning in middle and high school to make small cabinets, paddles for keyers, etc. Download and install FreeCad to follow along. Working with 3D is not as difficult at you think. Barry Buelow - WØIY has 2 time sections of learning this great software for us at Ozarkcon. Bring your laptops to follow along with the presentations. You can download KiCad for free at http://kicad-pcb.org/ What computer OS do you use? Can I use my computer? Here is the page that gives the info: http://kicad-pcb.org/download/ AND for you Chromebook owners, yes it is possible to run KiCad, Will KiCad get me away from dead-bug construction? Well, it sure has a good chance of me changing my ancient ways :-) Here is a link to FreeCad: https://www.freecadweb.org/ See you all at Branson.......it's gonna be fun!
|
|
|
|
Re: WX predictions for Ozarkcon/Branson
Tim N9PUZ
I'd like to see those occasional Thunderstorms go away on Thursday. Could make SOTA adventures challenging!
toggle quoted messageShow quoted text
Tim N9PUZ
On 03/31/19 07:27, Walter - K5EST wrote:
Looking at WeatherBug the WX for Ozarkcon (Branson) is looking so much better than last year's! https://www.weatherbug.com/weather-forecast/10-day-weather/branson-mo-65616
|
|
|
|
Re: WX predictions for Ozarkcon/Branson
Paul Smith
toggle quoted messageShow quoted text
From: main@4SQRP.groups.io <main@4SQRP.groups.io> on behalf of Johnny Matlock <jomatlock@...>
Sent: Sunday, March 31, 2019 3:06 PM To: main@4sqrp.groups.io Subject: Re: [4SQRP] WX predictions for Ozarkcon/Branson Wonderful News!
Nice spring weather for a change.
Cu all at Ozarkcon!
Johnny AC0BQ
On Sun, Mar 31, 2019 at 10:01 AM Tom Sevart <tmsevart@...> wrote:
On 03/31/19 07:27, Walter - K5EST wrote: Check out the 4SQRP website at
4sqrp.com
|
|
|
|
Re: WX predictions for Ozarkcon/Branson
Wonderful News! Nice spring weather for a change. Cu all at Ozarkcon! Johnny AC0BQ
On Sun, Mar 31, 2019 at 10:01 AM Tom Sevart <tmsevart@...> wrote: On 03/31/19 07:27, Walter - K5EST wrote: --
Check out the 4SQRP website at 4sqrp.com
|
|
|
|
Re: WX predictions for Ozarkcon/Branson
Tom Sevart
On 03/31/19 07:27, Walter - K5EST wrote:
Looking at WeatherBug the WX for Ozarkcon (Branson) is looking so much better than last year's! https://www.weatherbug.com/weather-forecast/10-day-weather/branson-mo-65616Great news! I'm totally tired of winter. -- Tom Sevart N2UHC St. Paul, KS
|
|
|
|
WX predictions for Ozarkcon/Branson
Looking at WeatherBug the WX for Ozarkcon (Branson) is looking so much better than last year's! https://www.weatherbug.com/weather-forecast/10-day-weather/branson-mo-65616 Thursday Hi - 63 Lo - 50 F Friday Hi - 67 Lo - 46 F Saturday Hi - 70 Lo - 55 F Sunday Hi - 67 Lo - 58 F
|
|
|
|
Re: Getting good to go ...
W6BOW
Tom K0AMD,
For me the mini60 has been a most helpful addition to my "test bench".
Some years ago I built a 30 Meter station - Xmtr/Rcvr - based on circuits drawn from ARRL's "Solid State Design, for the Radio Amateur" by the venerable Wes Hayward, W7ZOI and Doug DeMaw, W1FB.
My most advanced piece of test gear at that time was the Heath Kit solid state dip meter.
I find the mini60 helpful for a variety of purposes not least for adjusting my antenna(s) to minimum SWR at their feed points. After that I use a tuner to match the coax/balanced line at the xmtr output.
The mini60 battery life doesn't seem great. Just be mindful to have it fully charged before you "climb the ladder".
(While on this subject I have a question. I can adjust my antenna (trim the length/experiment with counterpoise length and positioning) to achieve quite acceptable SWR levels of 2:1 or lower. Using my tuner at the rig I can lower the SWR to 1:1. Signals sound stronger when I bypass the tuner but is that due to noise and not signal levels. Sometimes my power output reads higher than when I bypass the tuner to the antenna directly.) When does it matter and when does it not matter when/if I bypass the tuner. Why?)
So much sophisticated yet reasonably priced tools are available these days. I own a Tektronix 2430 scope which I purchased a few years ago for "cheap" on e-Bay. I haven't found the time yet to fire it up. Looking through the adds for modern day test gear (at reasonable prices new) I've wondered if it would be worth breaking out the old 2430. Why not go for a current and quite possibly more accurate and with many more "bells and whistles" test "appliance"?
There is a lot to be said (not everything mind you) for simplicity. QRP operation is a prime example. It allows us to get down and dirty with the fundamentals of the art and science of radio. That's why I will attempt to get my 2430 up and running. Even if I fail I'll still have learned a lot in the process. Maybe the mini60 has been out there long enough now to make them widely/cheaply available used. If you've never used an antenna analyzer before, this could be your opportunity. I haven't even used many of my mini60 features yet including interfacing with a computer.
These are just one ham's personal opinions. Goals not imperatives. Ham Radio is a river broad and deep. We stand on the shoulders of giants whomever we are and regardless of our expertise.
73
Don-W6BOW
San Francisco CA USA
-----Original Message-----
From: Thomas Martin <tem494@...> To: main <main@4sqrp.groups.io> Sent: Sat, Mar 30, 2019 6:05 pm Subject: Re: [4SQRP] Getting good to go ... Don
You have a picture with the mini60 antenna analyzer what do you think of it.
Tom
K0amd
|
|
|
