Date   

Re: ANNOUNCEMENT - THE GREAT 4SQRP LOGO CONTEST

AG1P Ron
 

GA Everyone,

 

I apologize for the delay in announcing the winner.  I had emergency surgery at the end of May and just now getting around.

 

Our thanks to all who submitted entries.  It was a difficult decision.

 

<drum roll please>  The winner of the Great 4SQRP Logo Contest is Dave Herron N8DAH.  Congratulations Dave.  The prizes will be headed your way shortly.  The winning entry will be revealed once we complete the trademark application process.

 

72 - Ron - AG1P

Volunteer Corporate Secretary

Volunteer Webmaster

Four State QRP Group

 

 

From: AG1P Ron [mailto:ag1p@...]
Sent: Saturday, April 13, 2019 5:45 PM
To: main@4SQRP.groups.io
Subject: ANNOUNCEMENT - THE GREAT 4SQRP LOGO CONTEST

 

GE Everyone,

 

Four State QRP Group has launched a new educational initiative - 4SQRP 4 Kids.  We would like to have a custom logo to use with the program, one that will signify that an education program is a legitimate 4SQRP sanctioned event.  In order to maximize the funding for OzarkCon and this kids program, we thought we would have a contest among our members to come up with an awesome design rather than engaging commercial artists.

 

Here are the rules.  A member or someone in his/her immediate family may submit one or multiple logos. By looking at the logo, it should be evident that it represents a children’s program sanctioned by 4SQRP.  Deadline for submitting entries is 2359 hrs on May 15th.  Submissions can be made by email  to me at  ag1p@... or mailed to:

 

Four State QRP Group

Logo Contest

PO Box 478

Waldport, OR 97394

 

Winner must be willing to transfer ownership to us so the logo can be trademarked to protect our kids program.  The winning entry will receive their choice of a 4SQRP Hilltopper 20 or Hilltopper 40 transceiver, plus a matching 4S-Tuner (Pun intended).  The decision of the panel of judges is final and the winning entry will be announced by June 1st.

 

Any questions should be directed to me at my email address above.

 

72 - Ron - AG1P

QRPcw

Volunteer Corporate Secretary

Volunteer Webmaster

Four State QRP Group

 

 


Re: 3D Printing

Charles Wells
 

For the past year I have been using a Taz6, courtesy of my employer (it was handed to me one day with the dictum to figure out how to make it work.)  It works well, and in general is pretty glitch free.

I'll second the admonition to use quality filament.  We made the mistake of buying some cheap PLA, and had no end of troubles (clogged nozzles, gloppy extrusion, inconsistent heat requirements, etc.).  Quality filament makes a world of difference.

A heated bed and good print surface make a difference too.  I have taken to printing on 'bare' glass as I was having a lot of adhesion problems with the PEI coating supplied on the original bed.

Best of fortune
Chas AD0UY


On Wed, Jun 12, 2019 at 11:54 AM N8DAH <Dherron@...> wrote:

I have used a few printers.

I currently use a Ender3 but unlike KR0NS I got way more than I paid for. I have added a few mods to it like a BLtouch and it works great. The overall print quality of any printer is based on more than just the printer.

You will have a learning curve to get the settings right, line width, line height and more.

The filament is another big factor in prints. I have tested more than a few and have found Esun and HatchBox to be worth the 2-3$ over the cheap stuff. Inland has been o.k. too just stay away from amazon basics they are very hit or miss.

The slicer you choose can also make a difference from a good experience and a bad one. I have been using cura and its a good starting software but I will be moving to simplified 3d very soon.

If you take your time learn the machine and what settings do what you will have a good time with them.

In the current market you can get into a solid printer for under 300$. The "you get what you pay for" is not always true in the printing world, just do your research and find one that fits your budget and has a good community.

The DaVinci line has had issue over the years, so has some of the monoprice printers. If I had to buy one again it would be another creality ender or CR10 they are very good and can load custom firmware which is a huge bonus.

73
--
David

  N8DAH

Kit-Projects.com

Shop now open!

 


Re: 3D Printing

Thomas Martin
 

I have an Crealty Ender 3 from Banggood. It came as a kit cost was about 170.00 delivered. You tube had assembly instructions basically very easy to assemble.
I would recommend going to youtube to get ideas on setting up and use.
I have made a series of items that were taken from thingiverse. They include duel paddle key and an Anderson power distribution panel. The keys were gifts go CW friends have received good feed back on them.
Ii have to depend on items published to thinginverse as I am not well versed in the cad programs to design my own.

Tom 
K0amd



On Jun 12, 2019, at 10:53 AM, WA4EFS <himself@...> wrote:

To those who have used a 3D printer to fabricate panels or other accessories –

Please share your experience, including printer make/model, ease of use, quality of output, etc.

 

Thank you,

-Lloyd (WA4EFS) ,_


Re: 3D Printing

Mike D
 

I've have a Makerbot replicator (dual extruder) and a Prusa I3.  The makerbot is junk, the prusa is great and open source.  

I have printed a lot of pla, abs, and petg.  Work related prototypes, radio parts, eurorack parts, camera parts, and many AR15 and other firearm lowers.  I highly suggest sticking with an open source machine and avoiding the really low end models.  A heated bed is very helpful also.  Dual extruded are generally unreliable.  

The best deal out there currently is the anycubic mega-s, a Chinese clone of the prusa for ~$300ish.

Stick to name brand filament unless you like wasting lots of time.  If your time isnt of value some of the cheaper Chinese stuff is ok to tinker with, but if like me you dont have much free time - buy quality and spend your time enjoying it.

Mike kd5rjz

On Wed, Jun 12, 2019, 10:53 AM WA4EFS <himself@... wrote:

To those who have used a 3D printer to fabricate panels or other accessories –

Please share your experience, including printer make/model, ease of use, quality of output, etc.

 

Thank you,

-Lloyd (WA4EFS) ,_


Re: 3D Printing

rohn blake
 

My son and I have a Monoprice Maker Select Plus and it's been great after two specific upgrades. We replaced the carriage plate with a heavy duty one which made bed leveling so much easier, and added z-axis stabilizers, also contributing to better bed leveling and also overall print quality.

We've also replaced the hot end with an all metal one from Micro Swiss, but that was just so that we could use more exotic filaments like glow-in-the-dark.

As has been said, a lot of it comes down to the quality of the filament used... Hatchbox has been our "premium" filament and Inland our close second.

I'm craving for a Prusa printer but only because it does auto-bed leveling (bed leveling is, arguably, the most tedious but necessary part of printing).

None of the printer really needed adjusting (beyond bed leveling), but a lot of tweaks in the slicer software was necessary to get optimum prints... I used a x-y-z calibration cube model and made one parameter change at a time and printed a new cube. It took the better part of a Saturday afternoon but prints are at high quality now.


Re: 3D Printing

N8DAH <Dherron@...>
 

I have used a few printers.

I currently use a Ender3 but unlike KR0NS I got way more than I paid for. I have added a few mods to it like a BLtouch and it works great. The overall print quality of any printer is based on more than just the printer.

You will have a learning curve to get the settings right, line width, line height and more.

The filament is another big factor in prints. I have tested more than a few and have found Esun and HatchBox to be worth the 2-3$ over the cheap stuff. Inland has been o.k. too just stay away from amazon basics they are very hit or miss.

The slicer you choose can also make a difference from a good experience and a bad one. I have been using cura and its a good starting software but I will be moving to simplified 3d very soon.

If you take your time learn the machine and what settings do what you will have a good time with them.

In the current market you can get into a solid printer for under 300$. The "you get what you pay for" is not always true in the printing world, just do your research and find one that fits your budget and has a good community.

The DaVinci line has had issue over the years, so has some of the monoprice printers. If I had to buy one again it would be another creality ender or CR10 they are very good and can load custom firmware which is a huge bonus.

73
--
David

  N8DAH

Kit-Projects.com

Shop now open!

 


Re: 3D Printing

KR0NS
 

I have used two printers.

The first is the DaVinci 1.0 by XYZ printing. It is ABS only and was the cheapest printer available at time of purchase.
Replacing the proprietary firmware made the printer usable (Repetier host + Repetier firmware).
Part finish is not great but usually good enough and I've made many functional parts with it.
The main cost of this printer is in the time that you'll have to invest getting the process and settings, both software and mechanical, correct.

The second printer I've used (but not owned) is the Ultimaker3.
In stark contrast to my experience with the DaVInci, this printer required very little adjustment and those that were required were partially automated.
Find (create) a model, load the (expensive) filament, and print.
It just works. And the prints are beautiful.

At the end of the day you get what you pay for. What you're unwilling to pay for in cash, you'll pay for with your time or do without.

KR0NS


3D Printing

WA4EFS
 

To those who have used a 3D printer to fabricate panels or other accessories –

Please share your experience, including printer make/model, ease of use, quality of output, etc.

 

Thank you,

-Lloyd (WA4EFS) ,_


clear top tins

Donald Sanders
 

Fans of the tins that may desire the clear top tins which are no longer sold by this group, may  be able to get them from Specialty Bottle.   https://www.specialtybottle.com/metal-tin-containers/hinged/thn8


Dr. Don W4BWS

God Bless All

Ham Radio does not make the world go round.
Ham Radio is what makes the ride worthwhile.


SSS Results

John Lonigro
 

It's too bad only 7 people participated in the Second Sunday Sprint this month. I guess with summer arriving (nearly), there's more outdoor family activity and maybe amateur radio's priority has dropped a bit for some.  Maybe the unsettled atmosphere had something to do with it as well.  However, most of those who participated saw pretty much action.  Carl WB0CFF came in first this month with a whopping 28 QSO points, followed closely by Chas W2SH with 19 and Gary KF7WNS with 11.  Carl will receive his June certificate shortly.

The overall leader for the year is Chas W2SH with 89 points but Carl is gaining fast with 80 points.  Nick WB5BKL is currently third with 57 points.

This marks the halfway point in the 2019 SSS.  Later this month is Field Day weekend.  Hopefully everyone will be able to get out for at least a few hours that weekend and have fun playing radio.

72,

John, AA0VE
4QRP Contest Coordinator


Upcoming Event: Wednesday Evening 40 and 80 meter Nets - Wed, 06/12/2019 8:00pm-9:00pm #cal-reminder

main@4SQRP.groups.io Calendar <main@...>
 

Reminder: Wednesday Evening 40 and 80 meter Nets

When: Wednesday, 12 June 2019, 8:00pm to 9:00pm, (GMT-05:00) America/Chicago

Where:40 and 80 Meters

View Event

Organizer: jomatlock@...

Description: The 40 Meter Net will be at 8:00 pm DST central time  on 7.122 +-. QRM
NCS is to be announced.

Wednesday evening 80 Meter CW Net. will be at  (8:30PM Central DST Time Wednesday). 
The 80 meter net will be called on 3.564 MHz +/- QRM.
Net control operators are Johnny AC0BQ or Paul N0NBD.

* NEW *  Wednesday evening DMR Voice Net will be at (Thursday) 0300 UTC (9:00PM Central Time Wednesday/)
Four States QRP has a Brandmeister DMR Talk Group (TG31654). Join us to discuss QRP, ask questions, or just ragchew. The Wednesday net is a directed net  but any other time you may use the Talk Group to chat with other QRPers.
Net Control operator is Bert NØYJ.


Re: Pacific Antenna (QRP-Kits) 41dB Step Attenuator

tom martin <tecnician@...>
 

Jim
Thanks to the link to your 3 D project. I found 3D printing as additive as ham radio.
Since getting my printer and finding thinginverse I’ve made several items related to ham radio.

Tom k0amd

On Jun 11, 2019, at 10:24 AM, Robert via Groups.Io <rltucker=aol.com@groups.io> wrote:

Excellent 3D print!

K5TD
Robert



Re: Pacific Antenna (QRP-Kits) 41dB Step Attenuator

Robert
 

Excellent 3D print!

K5TD
Robert


Re: Pacific Antenna (QRP-Kits) 41dB Step Attenuator

Everett Catlin
 

Very nice Job
73 Everett n5mzx

On Tuesday, June 11, 2019, 8:26:53 AM CDT, Jim Sheldon <w0eb@...> wrote:


I bought the 41 dB step attenuator kit from Pacific Antenna (QRP-Kits) www.qrpkits.com.  It's an open PC board with no cover and since it will actually handle 5 watts transmitter power, I thought it needed a case (there wasn't one available).  After I got into 3D printing, Jim Kortge (K8IQY) recommended Fusion 360 as a 3D CAD program to create my own designs for printing and helped me get started with it, I used the attenuator case as a learning project for Fusion 360 and actually managed to create a usable case that didn't look too bad either.  

I just got it published on one of the big 3D printer websites, "Thingiverse" where it is "thing" number 3684670  ( https://www.thingiverse.com/thing:3684670 ) and can be downloaded by anyone that needs it.

It isn't perfect, but it did come out looking pretty nice and sure will keep fingers (and fallen component leads, etc.) out of the exposed wiring as well as look decent on the bench.

Jim, W0EB


Re: Pacific Antenna (QRP-Kits) 41dB Step Attenuator

Dale Putnam
 

Very Nice Jim, Good Job!!

Have a great day,

Dale - WC7S in Wy

"Actions speak louder than words"



From: main@4SQRP.groups.io <main@4SQRP.groups.io> on behalf of Jim Sheldon <w0eb@...>
Sent: Tuesday, June 11, 2019 7:26 AM
To: 4SQRP Mailing List
Subject: [4SQRP] Pacific Antenna (QRP-Kits) 41dB Step Attenuator
 
I bought the 41 dB step attenuator kit from Pacific Antenna (QRP-Kits) www.qrpkits.com.  It's an open PC board with no cover and since it will actually handle 5 watts transmitter power, I thought it needed a case (there wasn't one available).  After I got into 3D printing, Jim Kortge (K8IQY) recommended Fusion 360 as a 3D CAD program to create my own designs for printing and helped me get started with it, I used the attenuator case as a learning project for Fusion 360 and actually managed to create a usable case that didn't look too bad either.  

I just got it published on one of the big 3D printer websites, "Thingiverse" where it is "thing" number 3684670  ( https://www.thingiverse.com/thing:3684670 ) and can be downloaded by anyone that needs it.

It isn't perfect, but it did come out looking pretty nice and sure will keep fingers (and fallen component leads, etc.) out of the exposed wiring as well as look decent on the bench.

Jim, W0EB


Pacific Antenna (QRP-Kits) 41dB Step Attenuator

Jim Sheldon
 

I bought the 41 dB step attenuator kit from Pacific Antenna (QRP-Kits) www.qrpkits.com.  It's an open PC board with no cover and since it will actually handle 5 watts transmitter power, I thought it needed a case (there wasn't one available).  After I got into 3D printing, Jim Kortge (K8IQY) recommended Fusion 360 as a 3D CAD program to create my own designs for printing and helped me get started with it, I used the attenuator case as a learning project for Fusion 360 and actually managed to create a usable case that didn't look too bad either.  

I just got it published on one of the big 3D printer websites, "Thingiverse" where it is "thing" number 3684670  ( https://www.thingiverse.com/thing:3684670 ) and can be downloaded by anyone that needs it.

It isn't perfect, but it did come out looking pretty nice and sure will keep fingers (and fallen component leads, etc.) out of the exposed wiring as well as look decent on the bench.

Jim, W0EB


Upcoming Event: Wednesday Evening 40 and 80 meter Nets - Wed, 06/12/2019 8:00pm-9:00pm #cal-reminder

main@4SQRP.groups.io Calendar <main@...>
 

Reminder: Wednesday Evening 40 and 80 meter Nets

When: Wednesday, 12 June 2019, 8:00pm to 9:00pm, (GMT-05:00) America/Chicago

Where:40 and 80 Meters

View Event

Organizer: jomatlock@...

Description: The 40 Meter Net will be at 8:00 pm DST central time  on 7.122 +-. QRM
NCS is to be announced.

Wednesday evening 80 Meter CW Net. will be at  (8:30PM Central DST Time Wednesday). 
The 80 meter net will be called on 3.564 MHz +/- QRM.
Net control operators are Johnny AC0BQ or Paul N0NBD.

* NEW *  Wednesday evening DMR Voice Net will be at (Thursday) 0300 UTC (9:00PM Central Time Wednesday/)
Four States QRP has a Brandmeister DMR Talk Group (TG31654). Join us to discuss QRP, ask questions, or just ragchew. The Wednesday net is a directed net  but any other time you may use the Talk Group to chat with other QRPers.
Net Control operator is Bert NØYJ.


Send in your score

John Lonigro
 

This is just a friendly reminder to send in your score by tomorrow (Tuesday) if possible.  I hope to tabulate everything tomorrow night and report it shortly thereafter.  In case you forgot, go to www.qrpcontest.com/4sqrp to record your score.

Thanks and 72,

John, AA0VE
4SQRP Contest Coordinator


4SQRP Second Sunday Sprint - Sun, 06/09/2019 #cal-notice

main@4SQRP.groups.io Calendar <noreply@...>
 

4SQRP Second Sunday Sprint

When:
Sunday, 9 June 2019
7:00pm to 9:00pm
(GMT-05:00) America/Chicago

Organizer:
John Lonigro

Description:
4SQRP Second Sunday Sprint. See http://www.4sqrp.com/4sqrpOnTheAir.php for details.


Upcoming Event: 4SQRP Second Sunday Sprint - Sun, 06/09/2019 7:00pm-9:00pm #cal-reminder

main@4SQRP.groups.io Calendar <main@...>
 

Reminder: 4SQRP Second Sunday Sprint

When: Sunday, 9 June 2019, 7:00pm to 9:00pm, (GMT-05:00) America/Chicago

View Event

Organizer: John Lonigro

Description: 4SQRP Second Sunday Sprint. See http://www.4sqrp.com/4sqrpOnTheAir.php for details.

3681 - 3700 of 23629