Date   

Re: OZARKCON SPRINT

Johnny AC0BQ
 

gm bob
ur rst was 539 a little thin but i got you in the log! 
bring on the bayou Jumper! 
let me know if i need to qsy? 
72 


On Sat, Apr 4, 2020 at 8:37 AM griffithsesq.robert via groups.io <signalnaut=aol.com@groups.io> wrote:

Johnny TNX for QSO. Your RST 449 here 25 Miles West of Philadelphia. I had the IC746 set at 5 Watts and using Indoor Dipole under roof. Had QSB and never copied my RST. Please advise. Will try to fire up the Bayou Jumper and work you with that. 73. Griff NE3I

 

Sent from Mail for Windows 10

 

From: Johnny Matlock
Sent: Saturday, April 4, 2020 9:12 AM
To: main@4sqrp.groups.io
Subject: Re: [4SQRP] OZARKCON SPRINT

 

GM GROUP 

I am qrv at 7.122 with wq5rp and Bert is qrv near 14.061 with k0n 

drop by and give us a shout! 

tnx 72 

Johnny AC0BQ

 

 



--
QRP....."More smiles per Watt"
72
JOHNNY AC0BQ  ..



Re: OZARKCON SPRINT

griffithsesq.robert
 

Johnny TNX for QSO. Your RST 449 here 25 Miles West of Philadelphia. I had the IC746 set at 5 Watts and using Indoor Dipole under roof. Had QSB and never copied my RST. Please advise. Will try to fire up the Bayou Jumper and work you with that. 73. Griff NE3I

 

Sent from Mail for Windows 10

 

From: Johnny Matlock
Sent: Saturday, April 4, 2020 9:12 AM
To: main@4sqrp.groups.io
Subject: Re: [4SQRP] OZARKCON SPRINT

 

GM GROUP 

I am qrv at 7.122 with wq5rp and Bert is qrv near 14.061 with k0n 

drop by and give us a shout! 

tnx 72 

Johnny AC0BQ

 

 


Re: OZARKCON SPRINT

Johnny AC0BQ
 

GM GROUP 
I am qrv at 7.122 with wq5rp and Bert is qrv near 14.061 with k0n 
drop by and give us a shout! 
tnx 72 
Johnny AC0BQ

On Fri, Apr 3, 2020 at 9:18 PM Johnny Matlock via groups.io <jomatlock=gmail.com@groups.io> wrote:
Good Evening 
I hope this message you and yours safe and well. 

Sorry for the last minute announcement, but the week slipped away from me.
Since tomorrow would have been the main event day for Ozarkcon, I thought it would be nice if we could get on the 
air and celebrate with a cw Sprint. 

The rules are as follows:
Scoring:
4 points for working K0N or WQ5RP. These will be the bonus stations.
2 points for working a 4 state member 
1 point for other stations. 

Exchange:
Call CQ OCON.
  
Name, Rst, State or Providence, 4SQRP Member Number or power for non members.
 
Duration:
8:00 am cdst, 13:00Z 04-04 to 8:00 pm cdst 1:00Z 04-05.  

Bands: 
10 through 160, no warc bands please.  

Spotting is welcome, please use QRPSPOTS.COM

The bonus stations K0N and WQ5RP will be on the air the following times: 
K0N 8:00-9:00 AM CDST and 12:00 to 1:00 CDST (Bert N0YJ)
WQ5RP 8:00-(;00 CDST and 12:00 1:00 CDST (Johnny AC0BQ)

We have lots of open time slots if any of you would like to operate the bonus stations. 
Please contact me via email, jomatlock@...

Logs:
Since we didn't have time to set up the auto logger, please send in a condensed log with your Name, Call Sign, number and type of stations worked and the total points accumulated.
Email the logs to John AA0VE at this email jonigro@....

Prizes:
1st and 2nd place can choose between a Cric_keyer kit or a $25.00 amazon Gift card. 

I hope to cu all on the air tomorrow! 
72 
Johnny AC0BQ





--
QRP....."More smiles per Watt"
72
JOHNNY AC0BQ  ..



Re: Hilltopper

Viktors Miske
 

Been getting the same error since yesterday.


Re: Hilltopper

John - KK4ITX
 

Ron,

Attached is a screenshot from this AM of the 4S website.  At the bottom is a message eluding to an error.

All else on my machine seems to be functioning properly so it’s either a website issue or a server problem ?

72,

John
KK4ITX 

image1.png

Visit:  www.zaarc.org.   👁

On Apr 4, 2020, at 02:14, AG1P Ron <ag1p@...> wrote:

Yes, we will be doing another run. I am gathering parts info now. Not sure of the lead time on the PCBs.
72 - Ron - AG1P
4SQRP Volunteer Webmaster

-----Original Message-----
From: main@4SQRP.groups.io [mailto:main@4SQRP.groups.io] On Behalf Of Lee Bahr
Sent: Friday, April 03, 2020 10:20 PM
To: main@4SQRP.groups.io
Subject: [4SQRP] Hilltopper

Anyone heard about a new supply of Hilltopper?  Are they going to do
them again?

Lee, w0vt








Re: Hilltopper

AG1P Ron
 

Yes, we will be doing another run. I am gathering parts info now. Not sure of the lead time on the PCBs.
72 - Ron - AG1P
4SQRP Volunteer Webmaster

-----Original Message-----
From: main@4SQRP.groups.io [mailto:main@4SQRP.groups.io] On Behalf Of Lee Bahr
Sent: Friday, April 03, 2020 10:20 PM
To: main@4SQRP.groups.io
Subject: [4SQRP] Hilltopper

Anyone heard about a new supply of Hilltopper? Are they going to do
them again?

Lee, w0vt


Hilltopper

Lee Bahr
 

Anyone heard about a new supply of Hilltopper?  Are they going to do them again?

Lee, w0vt


OZARKCON SPRINT

Johnny AC0BQ
 

Good Evening 
I hope this message you and yours safe and well. 

Sorry for the last minute announcement, but the week slipped away from me.
Since tomorrow would have been the main event day for Ozarkcon, I thought it would be nice if we could get on the 
air and celebrate with a cw Sprint. 

The rules are as follows:
Scoring:
4 points for working K0N or WQ5RP. These will be the bonus stations.
2 points for working a 4 state member 
1 point for other stations. 

Exchange:
Call CQ OCON.
  
Name, Rst, State or Providence, 4SQRP Member Number or power for non members.
 
Duration:
8:00 am cdst, 13:00Z 04-04 to 8:00 pm cdst 1:00Z 04-05.  

Bands: 
10 through 160, no warc bands please.  

Spotting is welcome, please use QRPSPOTS.COM

The bonus stations K0N and WQ5RP will be on the air the following times: 
K0N 8:00-9:00 AM CDST and 12:00 to 1:00 CDST (Bert N0YJ)
WQ5RP 8:00-(;00 CDST and 12:00 1:00 CDST (Johnny AC0BQ)

We have lots of open time slots if any of you would like to operate the bonus stations. 
Please contact me via email, jomatlock@...

Logs:
Since we didn't have time to set up the auto logger, please send in a condensed log with your Name, Call Sign, number and type of stations worked and the total points accumulated.
Email the logs to John AA0VE at this email jonigro@....

Prizes:
1st and 2nd place can choose between a Cric_keyer kit or a $25.00 amazon Gift card. 

I hope to cu all on the air tomorrow! 
72 
Johnny AC0BQ




Re: Virtual Ozarkcon

John - KK4ITX
 

This past week I completed my Cricket 30 and a DSO 138 digital Oscilloscope that I picked up maybe 2 years ago .  On Tuesday I received my Crickey and will probably work on it this weekend.  Sorting through my “must have” box I have found several more kits to either finish or start.

Got gas today at $1.739, too bad that there’s no place to go for lunch  !

See you on the air,

John
KK4ITX 

Visit:  www.zaarc.org.   👁

On Apr 3, 2020, at 10:40, Virginia R Smith <virginia@...> wrote:

Ha! Love it!  I just got a CricKey in the mail yesterday! Tonight would be the time to build it! Perhaps before that I will see if Uber Eats can bring me a banquet. Tomorrow morning I will practice my would-be presentation in hopes that I can give it for real at a future Hamfest.

I can feed kit scraps to the Boov and watch videos of last year!

Here's to high hopes for Ozarkcon 2021!
72/73
Virginia NV5F
 
<91502808_752693892151947_1131257955853795328_n.jpg>


Re: Virtual Ozarkcon

Virginia R Smith
 

Ha! Love it!  I just got a CricKey in the mail yesterday! Tonight would be the time to build it! Perhaps before that I will see if Uber Eats can bring me a banquet. Tomorrow morning I will practice my would-be presentation in hopes that I can give it for real at a future Hamfest.

I can feed kit scraps to the Boov and watch videos of last year!

Here's to high hopes for Ozarkcon 2021!
72/73
Virginia NV5F
 


Virtual Ozarkcon

Jerry Brown
 

All,

A little follow-up from 2014 Ozarkcon....Ozarkcon is also a place with great memories.....

A few years back (2014) I was given the privilege of sharing with Ozarkcon attendees my
experiences hamming in Iraqi Kurdistan. My wife and I volunteering there teaching in a high school
loosely sponsored by churches in US. My wife was also the school nurse. This was
2011-2012, the year after I retired from the US Army Medical Corps were i was a nuclear
medicine physical and diagnostic radiologist.

One of my students for algebra one was Abudllah. This is where the story continues....

Abdullah is now a senior physics major at the University of Pennsylvania! He is just one  of many
reasonsour time teaching there was the most amazing year of all the years 
Angie and have been married (since 1978). Abdullah just spent his second spring break with us. 
His full scholarship as a University of Pennsylvania President's World Scholar is worth $82 K this year.
I value his friendship more than you can imagine and i sense the feeling is mutual.

Abdullah's resume is something to behold for a 22 year old from Baghdad!

73,

Jerry N4EO, ex-YI9EO and Angie KH6EO, ex-YI9AB

 


Re: Virtual Ozarkcon

Michael Fletcher
 

Don,
Can I copy this text and post to the Amateur QRP Radio Facebook group?
I’ll be listening around 40 and 20 meter QRP calling frequencies to see if anyone is mentioning OZARKCON.
73,
Mike KL7IXI

On Apr 3, 2020, at 08:07, Don, W9EBK <donw9ebk@...> wrote:



Greetings 4-State QRPers,

I am thrilled to be arriving at my Virtual Ozarkcon 2020 this morning. N9HHE and I are getting pretty good at this Virtual Travel thing. Last month we were scheduled to go to North Carolina to meet our new Great Nephew and Great Niece. They were born to our Nephews’ wives on December 4 and January 4. Since we couldn’t go see them in person due to travel restrictions we did a Virtual visit with Moms and Dads sending us pictures and loving on them for us. We promised to make it to North Carolina to see them before they graduate High School.

 

I decided I wouldn’t let current restrictions totally cancel my Ozarkcon 2020. Just like we did with North Carolina, I’m doing a virtual Ozarkcon this weekend. I would normally stop at Grizzly Tool in Springfield, MO on the way to Branson. Instead I called them and ordered a new metal brake so I can make better enclosures and brackets for my radios.

 

In the spirit of the Build-a-thon I got into my tub of unbuilt kits and discovered I have 10 kits waiting for me to apply the soldering iron to them. I have a Cricket 80 and a Low Pass Filter kit that I won at Ozarkcon 2 years ago. They both might get built this weekend since I have time to do an extended Build-a-thon session. I say “might” because among my unbuilt kits I found an unlabeled Chinese kit that includes a 4-segment display. It must be a signal generator or a test set of some sort. I don’t remember ordering it and have no idea what it is. I’m considering building it just to see what it does when I’m done.

 

I figure a YouTube video or 2 will have to suffice for the conference portion of Ozarkcon. As for the banquet, we can cook something for ourselves. We just won’t be able to meet interesting people over dinner.

 

I may even give the Dummyload QSO party a try. In this case the dummy load will be 66 feet of wire strung up outside, and QSL cards will be via LOTW or U.S. mail instead of in person in the hotel.

 

And that hidden oscillator hunt that takes place at Ozarkcon; maybe this will be a good time to track down that noise source that gives me an S7 noise level most nights.

 

I’m sure Virtual Ozarkcon 2020 will not be as good as the real thing but we'll made due. As Teddy Roosevelt said, “Do what you can, with what you have, where you are.”

 

I hope to see everyone in 2021.

Stay safe,

Don, W9EBK


Re: Virtual Ozarkcon

W9QS
 

Wonderful idea.  My XYL and I will be tossing a dinner roll back and forth tomorrow night in honor of our favorite restaurant in Branson.   

On Friday, April 3, 2020, 8:07 AM, Don, W9EBK <donw9ebk@...> wrote:

Greetings 4-State QRPers,

I am thrilled to be arriving at my Virtual Ozarkcon 2020 this morning. N9HHE and I are getting pretty good at this Virtual Travel thing. Last month we were scheduled to go to North Carolina to meet our new Great Nephew and Great Niece. They were born to our Nephews’ wives on December 4 and January 4. Since we couldn’t go see them in person due to travel restrictions we did a Virtual visit with Moms and Dads sending us pictures and loving on them for us. We promised to make it to North Carolina to see them before they graduate High School.

 

I decided I wouldn’t let current restrictions totally cancel my Ozarkcon 2020. Just like we did with North Carolina, I’m doing a virtual Ozarkcon this weekend. I would normally stop at Grizzly Tool in Springfield, MO on the way to Branson. Instead I called them and ordered a new metal brake so I can make better enclosures and brackets for my radios.

 

In the spirit of the Build-a-thon I got into my tub of unbuilt kits and discovered I have 10 kits waiting for me to apply the soldering iron to them. I have a Cricket 80 and a Low Pass Filter kit that I won at Ozarkcon 2 years ago. They both might get built this weekend since I have time to do an extended Build-a-thon session. I say “might” because among my unbuilt kits I found an unlabeled Chinese kit that includes a 4-segment display. It must be a signal generator or a test set of some sort. I don’t remember ordering it and have no idea what it is. I’m considering building it just to see what it does when I’m done.

 

I figure a YouTube video or 2 will have to suffice for the conference portion of Ozarkcon. As for the banquet, we can cook something for ourselves. We just won’t be able to meet interesting people over dinner.

 

I may even give the Dummyload QSO party a try. In this case the dummy load will be 66 feet of wire strung up outside, and QSL cards will be via LOTW or U.S. mail instead of in person in the hotel.

 

And that hidden oscillator hunt that takes place at Ozarkcon; maybe this will be a good time to track down that noise source that gives me an S7 noise level most nights.

 

I’m sure Virtual Ozarkcon 2020 will not be as good as the real thing but we'll made due. As Teddy Roosevelt said, “Do what you can, with what you have, where you are.”

 

I hope to see everyone in 2021.

Stay safe,

Don, W9EBK


Re: Virtual Ozarkcon

Mike Malone
 

Very cool!  Optimism runneth amuck over there!

Mike KD5KXF


On Fri, Apr 3, 2020 at 8:07 AM Don, W9EBK <donw9ebk@...> wrote:

Greetings 4-State QRPers,

I am thrilled to be arriving at my Virtual Ozarkcon 2020 this morning. N9HHE and I are getting pretty good at this Virtual Travel thing. Last month we were scheduled to go to North Carolina to meet our new Great Nephew and Great Niece. They were born to our Nephews’ wives on December 4 and January 4. Since we couldn’t go see them in person due to travel restrictions we did a Virtual visit with Moms and Dads sending us pictures and loving on them for us. We promised to make it to North Carolina to see them before they graduate High School.

 

I decided I wouldn’t let current restrictions totally cancel my Ozarkcon 2020. Just like we did with North Carolina, I’m doing a virtual Ozarkcon this weekend. I would normally stop at Grizzly Tool in Springfield, MO on the way to Branson. Instead I called them and ordered a new metal brake so I can make better enclosures and brackets for my radios.

 

In the spirit of the Build-a-thon I got into my tub of unbuilt kits and discovered I have 10 kits waiting for me to apply the soldering iron to them. I have a Cricket 80 and a Low Pass Filter kit that I won at Ozarkcon 2 years ago. They both might get built this weekend since I have time to do an extended Build-a-thon session. I say “might” because among my unbuilt kits I found an unlabeled Chinese kit that includes a 4-segment display. It must be a signal generator or a test set of some sort. I don’t remember ordering it and have no idea what it is. I’m considering building it just to see what it does when I’m done.

 

I figure a YouTube video or 2 will have to suffice for the conference portion of Ozarkcon. As for the banquet, we can cook something for ourselves. We just won’t be able to meet interesting people over dinner.

 

I may even give the Dummyload QSO party a try. In this case the dummy load will be 66 feet of wire strung up outside, and QSL cards will be via LOTW or U.S. mail instead of in person in the hotel.

 

And that hidden oscillator hunt that takes place at Ozarkcon; maybe this will be a good time to track down that noise source that gives me an S7 noise level most nights.

 

I’m sure Virtual Ozarkcon 2020 will not be as good as the real thing but we'll made due. As Teddy Roosevelt said, “Do what you can, with what you have, where you are.”

 

I hope to see everyone in 2021.

Stay safe,

Don, W9EBK


Virtual Ozarkcon

Don, W9EBK
 

Greetings 4-State QRPers,

I am thrilled to be arriving at my Virtual Ozarkcon 2020 this morning. N9HHE and I are getting pretty good at this Virtual Travel thing. Last month we were scheduled to go to North Carolina to meet our new Great Nephew and Great Niece. They were born to our Nephews’ wives on December 4 and January 4. Since we couldn’t go see them in person due to travel restrictions we did a Virtual visit with Moms and Dads sending us pictures and loving on them for us. We promised to make it to North Carolina to see them before they graduate High School.

 

I decided I wouldn’t let current restrictions totally cancel my Ozarkcon 2020. Just like we did with North Carolina, I’m doing a virtual Ozarkcon this weekend. I would normally stop at Grizzly Tool in Springfield, MO on the way to Branson. Instead I called them and ordered a new metal brake so I can make better enclosures and brackets for my radios.

 

In the spirit of the Build-a-thon I got into my tub of unbuilt kits and discovered I have 10 kits waiting for me to apply the soldering iron to them. I have a Cricket 80 and a Low Pass Filter kit that I won at Ozarkcon 2 years ago. They both might get built this weekend since I have time to do an extended Build-a-thon session. I say “might” because among my unbuilt kits I found an unlabeled Chinese kit that includes a 4-segment display. It must be a signal generator or a test set of some sort. I don’t remember ordering it and have no idea what it is. I’m considering building it just to see what it does when I’m done.

 

I figure a YouTube video or 2 will have to suffice for the conference portion of Ozarkcon. As for the banquet, we can cook something for ourselves. We just won’t be able to meet interesting people over dinner.

 

I may even give the Dummyload QSO party a try. In this case the dummy load will be 66 feet of wire strung up outside, and QSL cards will be via LOTW or U.S. mail instead of in person in the hotel.

 

And that hidden oscillator hunt that takes place at Ozarkcon; maybe this will be a good time to track down that noise source that gives me an S7 noise level most nights.

 

I’m sure Virtual Ozarkcon 2020 will not be as good as the real thing but we'll made due. As Teddy Roosevelt said, “Do what you can, with what you have, where you are.”

 

I hope to see everyone in 2021.

Stay safe,

Don, W9EBK


Re: Voltages for the Hilltopper 40

Charles W. Powell
 

Hongera bwana! (Congratulations, sir!)

Have fun.  Such a cool little radio.

72,

Charles - 5H3DX
NK8O

On Apr 2, 2020, at 6:57 PM, W9QS via groups.io <mbroga@...> wrote:

Thanks for the hint.  Q1 is just fine.  After re-examining the solder side with my magnifier (old 78 year old eyes) I found a missed Solder  joint.   Works as it should.  Now to make some contacts.

Mike, W9QS

Sent from Yahoo Mail for iPad

On Thursday, April 2, 2020, 12:53 AM, Charles W. Powell via groups.io <doctorcwp@...> wrote:

It’s Q1.  If you remove it and the receiver comes to life, you’ve found the problem.  Don’t transmit without it but I had two Hilltoppers with this problem.  It might have something to do with the characteristic of the individual transistor.

72,

Charles

On Apr 2, 2020, at 4:53 AM, W9QS via groups.io <mbroga@...> wrote:

Hi Charles,

I have a newly built Hilltopper 20 and seems to be dead on receive.   Transmit works and I hear the sidetone.  What did you find with the T/R switch transistor?   Thanks in advance.

Mike, W9QS 


Sent from Yahoo Mail for iPad

On Wednesday, April 1, 2020, 12:00 AM, Charles W. Powell via Groups.Io <doctorcwp@...> wrote:

Jim,

I notice no one has responded to your message.  Dead, as in no receive?  Dead as in no transmit?

I had a problem with two of the Hilltoppers I built with the BS-170 that switches T/R not switching back to receive.  Give a few more details on the problem.

72,

Charles - 5H3DX
NK8O

On Mar 24, 2020, at 4:02 AM, Jim Long <jphiliplong@...> wrote:

Have built a Hilltopper 40 and it seems dead.  Is there any published information showing voltages through the circuit?

Jim, WW9H




Re: Voltages for the Hilltopper 40

W9QS
 

Thanks for the hint.  Q1 is just fine.  After re-examining the solder side with my magnifier (old 78 year old eyes) I found a missed Solder  joint.   Works as it should.  Now to make some contacts.

On Thursday, April 2, 2020, 12:53 AM, Charles W. Powell via groups.io <doctorcwp@...> wrote:

It’s Q1.  If you remove it and the receiver comes to life, you’ve found the problem.  Don’t transmit without it but I had two Hilltoppers with this problem.  It might have something to do with the characteristic of the individual transistor.

72,

Charles

On Apr 2, 2020, at 4:53 AM, W9QS via groups.io <mbroga@...> wrote:

Hi Charles,

I have a newly built Hilltopper 20 and seems to be dead on receive.   Transmit works and I hear the sidetone.  What did you find with the T/R switch transistor?   Thanks in advance.

Mike, W9QS 


Sent from Yahoo Mail for iPad

On Wednesday, April 1, 2020, 12:00 AM, Charles W. Powell via Groups.Io <doctorcwp@...> wrote:

Jim,

I notice no one has responded to your message.  Dead, as in no receive?  Dead as in no transmit?

I had a problem with two of the Hilltoppers I built with the BS-170 that switches T/R not switching back to receive.  Give a few more details on the problem.

72,

Charles - 5H3DX
NK8O

On Mar 24, 2020, at 4:02 AM, Jim Long <jphiliplong@...> wrote:

Have built a Hilltopper 40 and it seems dead.  Is there any published information showing voltages through the circuit?

Jim, WW9H



Re: Voltages for the Hilltopper 40

Charles W. Powell
 

It’s Q1.  If you remove it and the receiver comes to life, you’ve found the problem.  Don’t transmit without it but I had two Hilltoppers with this problem.  It might have something to do with the characteristic of the individual transistor.

72,

Charles

On Apr 2, 2020, at 4:53 AM, W9QS via groups.io <mbroga@...> wrote:

Hi Charles,

I have a newly built Hilltopper 20 and seems to be dead on receive.   Transmit works and I hear the sidetone.  What did you find with the T/R switch transistor?   Thanks in advance.

Mike, W9QS 


Sent from Yahoo Mail for iPad

On Wednesday, April 1, 2020, 12:00 AM, Charles W. Powell via Groups.Io <doctorcwp@...> wrote:

Jim,

I notice no one has responded to your message.  Dead, as in no receive?  Dead as in no transmit?

I had a problem with two of the Hilltoppers I built with the BS-170 that switches T/R not switching back to receive.  Give a few more details on the problem.

72,

Charles - 5H3DX
NK8O

On Mar 24, 2020, at 4:02 AM, Jim Long <jphiliplong@...> wrote:

Have built a Hilltopper 40 and it seems dead.  Is there any published information showing voltages through the circuit?

Jim, WW9H



Re: 40 AND 80 METER NET REPORT

John - KK4ITX
 

Johnny, heard you dealing with a check in for about 40 seconds then just a few dits and da.  Deep QSB between us.

One day I’ll bump my power to 5.01234 watts and nail you !

I post my failures so that you are aware that others are out there and we’ll be there next week too.

73,

John
KK4ITX 

Visit:  www.zaarc.org.   👁

On Apr 1, 2020, at 22:42, Johnny Matlock <jomatlock@...> wrote:

Hang in there Glenn, we will get er done some night!
72
Stay Well
Johnny AC0BQ 

On Wed, Apr 1, 2020 at 9:19 PM n4mj via groups.io <n4mj=yahoo.com@groups.io> wrote:
Tried several times on 80m Johnny. Your RST varied from 219 to 339. Will try again next week.
73/72 de n4mj//glenn


 
PLEASE REMOVE all email addresses before you send it on and use BCC option when forwarding"
  Thank you! 



On Wednesday, April 1, 2020, 09:11:18 PM CDT, Johnny Matlock <jomatlock@...> wrote:


Ge all 
I hope this report finds you all well. 
Please be careful during these unsure times. 

Check in's were as follows:
40 Meters
N4DR MARC
N4ELM DAVE 
K3NLT RUSS 
K4EQ DALE
N4MJ GLENN
KD0WF JIM 
WN0WWY DALE 
I heard NE3I but no contact

80 Meters 
N0YJ BERT 
K4EQ DALE 
N4DR LOST HIM TO QSB 
WA9PWP PAUL 
WN0WWY DALE 
K9ZTV KENT 
N4ELM DAVE 
W2SH CHAS 

It was a great net tonight, very surprised to see the turn out on 40 Meters for a change. 
72, 73 
Stay Well 
Johnny AC0BQ



--
QRP....."More smiles per Watt"
72
JOHNNY AC0BQ  ..


--
Check out the 4SQRP website at 4sqrp.com


Re: 40 AND 80 METER NET REPORT

Johnny AC0BQ
 

Hang in there Glenn, we will get er done some night!
72
Stay Well
Johnny AC0BQ 

On Wed, Apr 1, 2020 at 9:19 PM n4mj via groups.io <n4mj=yahoo.com@groups.io> wrote:
Tried several times on 80m Johnny. Your RST varied from 219 to 339. Will try again next week.
73/72 de n4mj//glenn


 
PLEASE REMOVE all email addresses before you send it on and use BCC option when forwarding"
  Thank you! 



On Wednesday, April 1, 2020, 09:11:18 PM CDT, Johnny Matlock <jomatlock@...> wrote:


Ge all 
I hope this report finds you all well. 
Please be careful during these unsure times. 

Check in's were as follows:
40 Meters
N4DR MARC
N4ELM DAVE 
K3NLT RUSS 
K4EQ DALE
N4MJ GLENN
KD0WF JIM 
WN0WWY DALE 
I heard NE3I but no contact

80 Meters 
N0YJ BERT 
K4EQ DALE 
N4DR LOST HIM TO QSB 
WA9PWP PAUL 
WN0WWY DALE 
K9ZTV KENT 
N4ELM DAVE 
W2SH CHAS 

It was a great net tonight, very surprised to see the turn out on 40 Meters for a change. 
72, 73 
Stay Well 
Johnny AC0BQ



--
QRP....."More smiles per Watt"
72
JOHNNY AC0BQ  ..


--
Check out the 4SQRP website at 4sqrp.com