Date   

Re: Confirming account

John Lonigro
 

Charles:

I didn't admit you into the group.  I just looked up your member number.  The "powers that be" admitted you into the group.  I think if you have a valid amateur license callsign, admission is pretty automatic.

72,
John, AA0VE

On 5/25/20 4:50 PM, KN6KR wrote:
John

Thank you very much for admitting me into the group.  I am very intrigued by the Sprint; I will try it once I get a qrp transceiver up and running.  Thanks and 73

Charles KN6KR

On Mon, May 25, 2020 at 11:22 AM John Lonigro <jonigro@...> wrote:
 Charles:

I just looked up your call on the 4SQRP member list and I see you are there, which means you are officially a member of 4SQRP.  Your member number can be found by hovering over your call on the member list.  I already did that and your number is 2218.

I would tell you the club's secret handshake, but I don't think we have one (hi).  But I will tell you to try the Second Sunday Sprint, which is on the 2nd Sunday of each month, from 7:00pm to 9:00 pm central time (either CST or CDT, whichever is in effect at the time).  Full rules can be found on the 4SQRP website, under "on air activities".  The June SSS won't be until June 14th.

72 and welcome to the club,

John, AA0VE
4SQRP Contest Coordinator

On 5/25/20 8:00 AM, KN6KR wrote:
I would like to confirm my account with 4sqrp.  Thanks

Charles KN6KR



Upcoming Event: Wednesday Evening 40 and 80 meter Nets - Wed, 05/27/2020 20:00-21:00 #cal-reminder

main@4SQRP.groups.io Calendar <main@...>
 

Reminder: Wednesday Evening 40 and 80 meter Nets

When: Wednesday, 27 May 2020, 20:00 to 21:00, (GMT-05:00) America/Chicago

Where:40 and 80 Meters

View Event

Organizer: jomatlock@...

Description: The 40 Meter Net will be at 8:00 pm central time  on 7.122 +-. QRM
NCS is WQ5RP/AC0BQ

Wednesday evening 80 Meter CW Net. will be at  (8:30PM Central Time Wednesday). 



The 80 meter net will be called on 3.564 MHz +/- QRM.
Net control operator is Johnny AC0BQ.

* NEW *  Wednesday evening DMR Voice Net will be at (Thursday) 0300 UTC (9:00PM Central Time Wednesday/)
Four States QRP has a Brandmeister DMR Talk Group (TG31654). Join us to discuss QRP, ask questions, or just ragchew. The Wednesday net is a directed net  but any other time you may use the Talk Group to chat with other QRPers.
Net Control operator is Bert NØYJ.


FOR SALE:

Dale Putnam
 

A young feller I know real well is listing a gently used Iphone, ask him for details 
There isn't anything wrong with the phone, works perfectly. They got a new I6s for me
for Father's day, and Matt is selling this one to gain funding for his projects. 
Thank you for looking and letting me post here.


Have a great day,

Dale - WC7S in Wy

"Actions speak louder than words"


OHR Sprint I instructions

KN6KR
 

Good afternoon.  I am glad to be admitted into this group.  I have been trying to find instructions for the Oak Hills Research Sprint 1 30 meters QRP rig (from around 1992 or 1993).  I built it in high school and now it does not seem to function.  Does anyone by any chance have the instructions in pdf format?  I was able to get a pdf copy of the Sprint II instructions but it is my understanding that the Spring I and Sprint II use different transmitters.  I tried to reach out to the successor to OHR, Milestone Tech, but I don’t believe that company is active any more.  Thank you,

Charles, KN6kR


Re: Confirming account

KN6KR
 

John

Thank you very much for admitting me into the group.  I am very intrigued by the Sprint; I will try it once I get a qrp transceiver up and running.  Thanks and 73

Charles KN6KR

On Mon, May 25, 2020 at 11:22 AM John Lonigro <jonigro@...> wrote:
 Charles:

I just looked up your call on the 4SQRP member list and I see you are there, which means you are officially a member of 4SQRP.  Your member number can be found by hovering over your call on the member list.  I already did that and your number is 2218.

I would tell you the club's secret handshake, but I don't think we have one (hi).  But I will tell you to try the Second Sunday Sprint, which is on the 2nd Sunday of each month, from 7:00pm to 9:00 pm central time (either CST or CDT, whichever is in effect at the time).  Full rules can be found on the 4SQRP website, under "on air activities".  The June SSS won't be until June 14th.

72 and welcome to the club,

John, AA0VE
4SQRP Contest Coordinator

On 5/25/20 8:00 AM, KN6KR wrote:
I would like to confirm my account with 4sqrp.  Thanks

Charles KN6KR


Re: Confirming account

John Lonigro
 

 Charles:

I just looked up your call on the 4SQRP member list and I see you are there, which means you are officially a member of 4SQRP.  Your member number can be found by hovering over your call on the member list.  I already did that and your number is 2218.

I would tell you the club's secret handshake, but I don't think we have one (hi).  But I will tell you to try the Second Sunday Sprint, which is on the 2nd Sunday of each month, from 7:00pm to 9:00 pm central time (either CST or CDT, whichever is in effect at the time).  Full rules can be found on the 4SQRP website, under "on air activities".  The June SSS won't be until June 14th.

72 and welcome to the club,

John, AA0VE
4SQRP Contest Coordinator

On 5/25/20 8:00 AM, KN6KR wrote:
I would like to confirm my account with 4sqrp.  Thanks

Charles KN6KR


Re: Confirming account

Johnny AC0BQ
 

Gm Charles
Looks like your in!
Welcome to the 4 SQRP group.
72
Stay Safe.
Johnny ACØBQ 

On Mon, May 25, 2020 at 9:54 AM KN6KR <charlesbuxbaum@...> wrote:
I would like to confirm my account with 4sqrp.  Thanks

Charles KN6KR

--
Check out the 4SQRP website at 4sqrp.com


Re: Confirming account

Michael McEwen
 

Welcome to the group!  

72/73 Doc K5OSA 

On Mon, May 25, 2020, 09:54 KN6KR <charlesbuxbaum@...> wrote:
I would like to confirm my account with 4sqrp.  Thanks

Charles KN6KR


Confirming account

KN6KR
 

I would like to confirm my account with 4sqrp.  Thanks

Charles KN6KR


Re: W0RW Lending Library is Open

Jack Hubbard
 

Do you want any more books?  I have 5 or 6 to donate having radio communications in them. 
Jack, NI8N

Jack Hubbard
NI8N

On May 24, 2020, at 12:49 PM, Jack Hubbard <ni8njack@...> wrote:


I'll send these two books and also "Between Silk and Cyanide" by Marks in a few weeks.  You will really enjoy Mark's book.

73
Jack, NI8N

On Sun, May 24, 2020 at 12:17 PM w0rw <w0rw1@...> wrote:
Those are good book suggestions.
Thanks for the review of the stories.
The TinyCat Library is getting pretty full now.
i have to limit the total number of books because of the scrolling banner.
It is taking 3 minutes right now to scroll through all the books.
i could add hundreds of book in a tabular list without a scrolling banner.
https://www.librarycat.org/lib/W0RW
73
Paul   w0rw


Re: problem with my 4SQRP Ozark Patrol Radio

Johnny AC0BQ
 


Gm Guys
Hope your all have a Safe Memorial Day.
Just FYI,
Dave Cripe NMØS designed the Ozark Patrol.
72
Johnny ACØBQ 


On Sun, May 24, 2020 at 12:50 PM Herb Parsons via groups.io <radioherb=aol.com@groups.io> wrote:
Thanks Jerome!

Herb


-----Original Message-----
From: Jerome Wysocki <jeromewysocki48@...>
To: main <main@4SQRP.groups.io>
Sent: Sun, May 24, 2020 1:33 pm
Subject: Re: [4SQRP] problem with my 4SQRP Ozark Patrol Radio

Hi Herb,

Try melting and re-flowing the solder on each of the solder pads, one lead at a time for each component, then recheck your voltages. Before doing this to the torroid coil windings, measure their resistances first with an ohm meter. You might have a cold solder joint on one or more of these coil wires, due to the fact that there is transparent enamel insulation around these wires. You undoubtedly carefully scraped off this enamel insulation, but it could be deceptive. It is possible that solder flowed around, but did not stick properly to the wires. I had this happen and had to re-solder mine as such. Visual examination did not reveal the problem, so I carefully tinned the wires and when this appeared ok, I re-soldered the coil back on to the board. This time I had success, and my set worked.

Keep us up to date on your attempts to get your receiver going. Hope you get yours up and running soon.

73s

Jerry Wysocki, KC9JXE


--
Check out the 4SQRP website at 4sqrp.com


Re: problem with my 4SQRP Ozark Patrol Radio

Herb Parsons <radioherb@...>
 

Thanks Jerome!

Herb


-----Original Message-----
From: Jerome Wysocki <jeromewysocki48@...>
To: main <main@4SQRP.groups.io>
Sent: Sun, May 24, 2020 1:33 pm
Subject: Re: [4SQRP] problem with my 4SQRP Ozark Patrol Radio

Hi Herb,

Try melting and re-flowing the solder on each of the solder pads, one lead at a time for each component, then recheck your voltages. Before doing this to the torroid coil windings, measure their resistances first with an ohm meter. You might have a cold solder joint on one or more of these coil wires, due to the fact that there is transparent enamel insulation around these wires. You undoubtedly carefully scraped off this enamel insulation, but it could be deceptive. It is possible that solder flowed around, but did not stick properly to the wires. I had this happen and had to re-solder mine as such. Visual examination did not reveal the problem, so I carefully tinned the wires and when this appeared ok, I re-soldered the coil back on to the board. This time I had success, and my set worked.

Keep us up to date on your attempts to get your receiver going. Hope you get yours up and running soon.

73s

Jerry Wysocki, KC9JXE



Re: problem with my 4SQRP Ozark Patrol Radio

Herb Parsons <radioherb@...>
 

Thanks again Curt!

Herb


-----Original Message-----
From: Curt via groups.io <rhulett1@...>
To: main <main@4SQRP.groups.io>
Sent: Sun, May 24, 2020 1:41 pm
Subject: Re: [4SQRP] problem with my 4SQRP Ozark Patrol Radio

"I even removed L1 and reversed it"
Be sure to put the toroid back as shown in the build manual.  If the "sense" for the one-turn tickler is wrong the regeneration won't.  So trying to correct low volume through the speaker, changing L1 may have produced lots of hiss in the headphones but no RF gain ( regeneration ).  Also, a gimmick of about 1" twist was good for me using the station antenna.

BTW, whoever designed and kitted this radio did a first class job, this regen receiver worked right off of the build table, unlike some others I have built.  Especially if the description has "high performance" in the name, I had poor results.  Like my dear old Dad always said, better to under promise and over perform than the other way around.

Curt KB5JO


Re: problem with my 4SQRP Ozark Patrol Radio

Curt
 

"I even removed L1 and reversed it"
Be sure to put the toroid back as shown in the build manual.  If the "sense" for the one-turn tickler is wrong the regeneration won't.  So trying to correct low volume through the speaker, changing L1 may have produced lots of hiss in the headphones but no RF gain ( regeneration ).  Also, a gimmick of about 1" twist was good for me using the station antenna.

BTW, whoever designed and kitted this radio did a first class job, this regen receiver worked right off of the build table, unlike some others I have built.  Especially if the description has "high performance" in the name, I had poor results.  Like my dear old Dad always said, better to under promise and over perform than the other way around.

Curt KB5JO


Re: problem with my 4SQRP Ozark Patrol Radio

Jerome Wysocki
 

Hi Herb,

Try melting and re-flowing the solder on each of the solder pads, one lead at a time for each component, then recheck your voltages. Before doing this to the torroid coil windings, measure their resistances first with an ohm meter. You might have a cold solder joint on one or more of these coil wires, due to the fact that there is transparent enamel insulation around these wires. You undoubtedly carefully scraped off this enamel insulation, but it could be deceptive. It is possible that solder flowed around, but did not stick properly to the wires. I had this happen and had to re-solder mine as such. Visual examination did not reveal the problem, so I carefully tinned the wires and when this appeared ok, I re-soldered the coil back on to the board. This time I had success, and my set worked.

Keep us up to date on your attempts to get your receiver going. Hope you get yours up and running soon.

73s

Jerry Wysocki, KC9JXE


Re: W0RW Lending Library is Open

Jack Hubbard
 

I'll send these two books and also "Between Silk and Cyanide" by Marks in a few weeks.  You will really enjoy Mark's book.

73
Jack, NI8N

On Sun, May 24, 2020 at 12:17 PM w0rw <w0rw1@...> wrote:
Those are good book suggestions.
Thanks for the review of the stories.
The TinyCat Library is getting pretty full now.
i have to limit the total number of books because of the scrolling banner.
It is taking 3 minutes right now to scroll through all the books.
i could add hundreds of book in a tabular list without a scrolling banner.
https://www.librarycat.org/lib/W0RW
73
Paul   w0rw


Re: problem with my 4SQRP Ozark Patrol Radio

Herb Parsons <radioherb@...>
 

Thanks Curt!
Herb


-----Original Message-----
From: Curt via groups.io <rhulett1@...>
To: main <main@4SQRP.groups.io>
Sent: Sun, May 24, 2020 8:37 am
Subject: Re: [4SQRP] problem with my 4SQRP Ozark Patrol Radio

Have you tried the radio with headphones?  The volume available from the speaker without more amplification is underwhelming.  I added one of those cheap $2 amplifiers to increase the volume through the speaker.

Curt KB5JO


Re: problem with my 4SQRP Ozark Patrol Radio

Herb Parsons <radioherb@...>
 

Thanks! I'll check it out when I get back, the 1st week in June. 


-----Original Message-----
From: Jess Gypin <ontarget1911@...>
To: main <main@4sqrp.groups.io>
Sent: Sun, May 24, 2020 10:06 am
Subject: Re: [4SQRP] problem with my 4SQRP Ozark Patrol Radio

You don’t get much volume at all out of the speaker. Yes headphones. And try a couple of different ones if you have them. I also added an audio amplifier.

Jess AE0CW

On May 24, 2020, at 6:37 AM, Curt via groups.io <rhulett1@...> wrote:

Have you tried the radio with headphones?  The volume available from the speaker without more amplification is underwhelming.  I added one of those cheap $2 amplifiers to increase the volume through the speaker.

Curt KB5JO


Re: W0RW Lending Library is Open

w0rw
 

Those are good book suggestions.
Thanks for the review of the stories.
The TinyCat Library is getting pretty full now.
i have to limit the total number of books because of the scrolling banner.
It is taking 3 minutes right now to scroll through all the books.
i could add hundreds of book in a tabular list without a scrolling banner.
https://www.librarycat.org/lib/W0RW
73
Paul   w0rw


Re: Yaesu FT60 for sale

RWilliam Henderson
 

Jess, I will send you the money via paypal if you will give me what I need to send it to you.