Date   

TONIGHT'S NETS

Robert
 

WELL THE HF NETS WHERE PRETTY ROUGH TONIGHT, I EVEN BROKE OUT MY OLD TEN TEC OMNI 6+ AND STILL HAD TROUBLE WITH QRM AND QRN AND PLAIN WEAK SIGNALS. HAD TO MOVE OFF OF 3.564 TO 3.563.

40 METERS

N4MJ GLENN TN
WI5H CURT TX
N4ELM DAVE LA

80 METERS
KD0WF JIM MO
N4MJ GLENN TN
AND I THINK AA9AA BUT I AM NOT SURE HE WAS WEAK

DELTA MIKE ROMEO NET
N0RSR ROGER
N4ELM DAVE
AC0BQ JOHNNY
N9EGT WAYNE
NK8O CHARLES
K0BOG CHUCK
KE0PVI RUSSELL
WG5F ED

THANKS TO EVERYONE WHO CHECKED IN TONIGHT
73'S
BERT
N0YJ



Re: Unbuilt 4SQRP Kits

KF5CSW
 

Arrgh!  Too late!  I was hoping to buy the SS-40 receiver, NS-40 transmitter and Magic Box unassembled. If anyone out there has these, I would love to buy them.

De KF5CSW 
John Vogel
Roger's, AR


On Wed, May 5, 2021, 7:04 AM Jim, N5IB <n5ib@...> wrote:
For the lucky op who scored Jerry's stash...
The SAVXO can be used with the Bayou Jumper.
The SAVXO manual has info about adapting it to the SS-40, and that Tx is identical to the Tx section of the BJ.

N5IB






Re: Bayou Jumper test schedule

Paul Goemans
 

Bruce,
  I heard you very well, calling CQ on 7120 KHz at 0154Z. I called you with 5 watts, no go. I heard you answer WD9DWE’s CQ, he was 1 KHz above you and running 100 watts. I guess he did not hear you! I called you a few more times on 7120 KHz but only had N3COB and AG5GW respond. Maybe you were on the wrong side of “zero beat”?
 
Paul Goemans WA9PWP
Stoughton, WI
 

From: Bruce Kirkpatrick via groups.io
Sent: Wednesday, May 05, 2021 11:44 AM
To: main@4sqrp.groups.io
Subject: [4SQRP] Bayou Jumper test schedule
 
Good morning/afternoon all

I would like to try to make a contact or contacts with my Bayou Jumper this evening. 
I will be at 7120.1 KHz, at 8:45 p.m. Central time. 
My code speed is about 10 wpm
I will be running it barefoot into a shortened dipole up about twenty feet.
I would welcome and appreciate anyone who could try to work me this evening so that I may prove my worthiness as a spy.
Thanks and 73…..
Bruce   KEØVR
Henderson, Colorado

 


qsy to 3.563

Robert
 

qrm on 3.564


Wednesday Evening 40 and 80 meter Nets - Wed, 05/05/2021 #cal-notice

main@4SQRP.groups.io Calendar <noreply@...>
 

Wednesday Evening 40 and 80 meter Nets

When:
Wednesday, 5 May 2021
20:00 to 21:00
(GMT-05:00) America/Chicago

Where:
40 and 80 Meters

Organizer:
jomatlock@...

Description:
The 40 Meter Net will be at 8:00 pm central time (DST)  on 7.122 +-. QRM
NCS is WQ5RP/ACØBQ 

Wednesday evening 80 Meter CW Net. will be at  (8:30PM Central Time Wednesday (DST). 



The 80 meter net will be called on 3.564 MHz +/- QRM.
Net control operator is Johnny ACØBQ 

* NEW *  Wednesday evening DMR Voice Net will be at (Thursday) 02:00 UTC (9:00PM Central dst Time Wednesday/)
Four States QRP has a Brandmeister DMR Talk Group (TG31654). Join us to discuss QRP, ask questions, or just ragchew. The Wednesday net is a directed net  but any other time you may use the Talk Group to chat with other QRPers.
Net Control operator is Bert NØYJ.


Tonight’s Net

Johnny AC0BQ
 

Ge Group
The NCS for tonight’s net will be Bert N0YJ.
I have to attend to my monthly civic duties.
Cu next week.
72
Johnny ACØBQ 
--
Check out the 4SQRP website at 4sqrp.com


Wednesday Evening 40 and 80 meter Nets - Wed, 05/05/2021 20:00-21:00 #cal-reminder

main@4SQRP.groups.io Calendar <main@...>
 

Reminder: Wednesday Evening 40 and 80 meter Nets

When: Wednesday, 5 May 2021, 20:00 to 21:00, (GMT-05:00) America/Chicago

Where:40 and 80 Meters

View Event

Organizer: jomatlock@...

Description: The 40 Meter Net will be at 8:00 pm central time (DST)  on 7.122 +-. QRM
NCS is WQ5RP/ACØBQ 

Wednesday evening 80 Meter CW Net. will be at  (8:30PM Central Time Wednesday (DST). 



The 80 meter net will be called on 3.564 MHz +/- QRM.
Net control operator is Johnny ACØBQ 

* NEW *  Wednesday evening DMR Voice Net will be at (Thursday) 02:00 UTC (9:00PM Central dst Time Wednesday/)
Four States QRP has a Brandmeister DMR Talk Group (TG31654). Join us to discuss QRP, ask questions, or just ragchew. The Wednesday net is a directed net  but any other time you may use the Talk Group to chat with other QRPers.
Net Control operator is Bert NØYJ.


Re: Bayou Jumper test schedule

Roger-N0RSR
 

I might be able to give it a shot between nets tonight.

If you're on at 8pm central you may find the 4SQRP net brimming with activity around that frequency. Net control may well be searching around 7.122 for agents and check-ins.

-Roger
N0RSR

On Wed, May 5, 2021, 9:44 AM Bruce Kirkpatrick via groups.io <bkirkpatrick5=me.com@groups.io> wrote:
Good morning/afternoon all

I would like to try to make a contact or contacts with my Bayou Jumper this evening.  
I will be at 7120.1 KHz, at 8:45 p.m. Central time.  
My code speed is about 10 wpm.
I will be running it barefoot into a shortened dipole up about twenty feet.
I would welcome and appreciate anyone who could try to work me this evening so that I may prove my worthiness as a spy.
Thanks and 73…..
Bruce   KEØVR
Henderson, Colorado

On May 5, 2021, at 6:31 AM, w0rw <w0rw1@...> wrote:

W0RW  operating from Ice Station Zebra, <http://tinyurl.com/zgss4yu>. 
Date:  6 May 2021, Thursday. ...Tomorrow...
Freq:   7031 kHz +/- 1. 
Time:  1600z, (Noon EDT). 
  
First i will be using my 40 meter Trojan Horse Radio,  
It looks like a real BC-221 WW2 Frequency Meter but it has a '1 Watter'  inside 
driving a Pacific Antenna  10W amplifier  <http://www.qrpkits.com/10wamp.html> . 
It has a Velleman K4001 audio amplifier for the speaker and a Hi-Per-Mite CW audio filter from <http://www.4sqrp.com>.
  You can see photos of it in QRP Quarterly,  April 2021.

Then i will switch over to my other Trojan Horse Radio, The PRC319 "Lite"
It looks like a real PRC319 but it has a  '1 Watter'  inside 

Freq:   14061 kHz +/- 1. 
Time:  1700z, (1300 EDT). 

  You can see photos of the 'PRC319 Lite' in QRP Quarterly, Oct. 2016.  
It  weighs about 7 pounds with a 7S - 26650 LiIon battery pack. 

  Paul w0rw 
@ Ice Station Zebra, 
Colorado



Bayou Jumper test schedule

Bruce Kirkpatrick
 

Good morning/afternoon all

I would like to try to make a contact or contacts with my Bayou Jumper this evening.  
I will be at 7120.1 KHz, at 8:45 p.m. Central time.  
My code speed is about 10 wpm.
I will be running it barefoot into a shortened dipole up about twenty feet.
I would welcome and appreciate anyone who could try to work me this evening so that I may prove my worthiness as a spy.
Thanks and 73…..
Bruce   KEØVR
Henderson, Colorado

On May 5, 2021, at 6:31 AM, w0rw <w0rw1@...> wrote:

W0RW  operating from Ice Station Zebra, <http://tinyurl.com/zgss4yu>. 
Date:  6 May 2021, Thursday. ...Tomorrow...
Freq:   7031 kHz +/- 1. 
Time:  1600z, (Noon EDT). 
  
First i will be using my 40 meter Trojan Horse Radio,  
It looks like a real BC-221 WW2 Frequency Meter but it has a '1 Watter'  inside 
driving a Pacific Antenna  10W amplifier  <http://www.qrpkits.com/10wamp.html> . 
It has a Velleman K4001 audio amplifier for the speaker and a Hi-Per-Mite CW audio filter from <http://www.4sqrp.com>.
  You can see photos of it in QRP Quarterly,  April 2021.

Then i will switch over to my other Trojan Horse Radio, The PRC319 "Lite"
It looks like a real PRC319 but it has a  '1 Watter'  inside 

Freq:   14061 kHz +/- 1. 
Time:  1700z, (1300 EDT). 

  You can see photos of the 'PRC319 Lite' in QRP Quarterly, Oct. 2016.  
It  weighs about 7 pounds with a 7S - 26650 LiIon battery pack. 

  Paul w0rw 
@ Ice Station Zebra, 
Colorado



Re: W0RW Trojan Horse Radio, 7031, 6 May 21, 1600z.

Matthew Halsey
 

Original e-mail indicates 1600z (40m) and 1700z (20m)

Matt
KC3OIV

On May 5, 2021, at 9:27 AM, Matthew Halsey via groups.io <rftb_cowboy@...> wrote:

Is there a way to see photos without having a subscription to ARP Quarterly?

Matt
KC3OIV

On May 5, 2021, at 8:31 AM, w0rw <w0rw1@...> wrote:

W0RW  operating from Ice Station Zebra, <http://tinyurl.com/zgss4yu>. 
Date:  6 May 2021, Thursday. ...Tomorrow...
Freq:   7031 kHz +/- 1. 
Time:  1600z, (Noon EDT). 
  
First i will be using my 40 meter Trojan Horse Radio,  
It looks like a real BC-221 WW2 Frequency Meter but it has a '1 Watter'  inside 
driving a Pacific Antenna  10W amplifier  <http://www.qrpkits.com/10wamp.html> . 
It has a Velleman K4001 audio amplifier for the speaker and a Hi-Per-Mite CW audio filter from <http://www.4sqrp.com>.
  You can see photos of it in QRP Quarterly,  April 2021.

Then i will switch over to my other Trojan Horse Radio, The PRC319 "Lite"
It looks like a real PRC319 but it has a  '1 Watter'  inside 

Freq:   14061 kHz +/- 1. 
Time:  1700z, (1300 EDT). 

  You can see photos of the 'PRC319 Lite' in QRP Quarterly, Oct. 2016.  
It  weighs about 7 pounds with a 7S - 26650 LiIon battery pack. 

  Paul w0rw 
@ Ice Station Zebra, 
Colorado




Re: W0RW Trojan Horse Radio, 7031, 6 May 21, 1600z.

Matthew Halsey
 

Is there a way to see photos without having a subscription to ARP Quarterly?

Matt
KC3OIV

On May 5, 2021, at 8:31 AM, w0rw <w0rw1@...> wrote:

W0RW  operating from Ice Station Zebra, <http://tinyurl.com/zgss4yu>. 
Date:  6 May 2021, Thursday. ...Tomorrow...
Freq:   7031 kHz +/- 1. 
Time:  1600z, (Noon EDT). 
  
First i will be using my 40 meter Trojan Horse Radio,  
It looks like a real BC-221 WW2 Frequency Meter but it has a '1 Watter'  inside 
driving a Pacific Antenna  10W amplifier  <http://www.qrpkits.com/10wamp.html> . 
It has a Velleman K4001 audio amplifier for the speaker and a Hi-Per-Mite CW audio filter from <http://www.4sqrp.com>.
  You can see photos of it in QRP Quarterly,  April 2021.

Then i will switch over to my other Trojan Horse Radio, The PRC319 "Lite"
It looks like a real PRC319 but it has a  '1 Watter'  inside 

Freq:   14061 kHz +/- 1. 
Time:  1700z, (1300 EDT). 

  You can see photos of the 'PRC319 Lite' in QRP Quarterly, Oct. 2016.  
It  weighs about 7 pounds with a 7S - 26650 LiIon battery pack. 

  Paul w0rw 
@ Ice Station Zebra, 
Colorado



W0RW Trojan Horse Radio, 7031, 6 May 21, 1600z.

w0rw
 

W0RW  operating from Ice Station Zebra, <http://tinyurl.com/zgss4yu>. 

Date:  6 May 2021, Thursday. ...Tomorrow...
Freq:   7031 kHz +/- 1. 

Time:  1600z, (Noon EDT). 

  

First i will be using my 40 meter Trojan Horse Radio,  

It looks like a real BC-221 WW2 Frequency Meter but it has a '1 Watter'  inside 

 <http://www.kitsandparts.com/1watter-V3.php>, 

driving a Pacific Antenna  10W amplifier  <http://www.qrpkits.com/10wamp.html> . 

It has a Velleman K4001 audio amplifier for the speaker and a Hi-Per-Mite CW audio filter from <http://www.4sqrp.com>.

  You can see photos of it in QRP Quarterly,  April 2021.


Then i will switch over to my other Trojan Horse Radio, The PRC319 "Lite"

It looks like a real PRC319 but it has a  '1 Watter'  inside 

Freq:   14061 kHz +/- 1. 

Time:  1700z, (1300 EDT). 


  You can see photos of the 'PRC319 Lite' in QRP Quarterly, Oct. 2016.  

It  weighs about 7 pounds with a 7S - 26650 LiIon battery pack. 


  Paul w0rw 

@ Ice Station Zebra, 

Colorado



Re: Unbuilt 4SQRP Kits

Jim, N5IB
 

For the lucky op who scored Jerry's stash...
The SAVXO can be used with the Bayou Jumper.
The SAVXO manual has info about adapting it to the SS-40, and that Tx is identical to the Tx section of the BJ.

N5IB


Re: Unbuilt 4SQRP Kits

Jerry Fay
 

Shawnr and others these have been claimed.  Thanks for looking.

Jerry, WU1U


Re: Unbuilt 4SQRP Kits

Shawn Reed
 

Couldn't reach you, Jerry. I am good for the lot, if still available. Thank you, Shawnr. kf7yff

On Tuesday, May 4, 2021, 07:39:33 PM PDT, Jerry Fay via groups.io <wu1u@...> wrote:


I am going through the process of preparing for possible relocation.  That has led to reviewing a number of boxes that came from a previous move that had not been opened. I found the following unbuilt kits from 4SQRP and do see an opportunity to build them.  I do not wish to parcel them out so if someone is willing to buy the lot at my cost of $160 I will pay to ship them to you.

Four State Dummy Load SMD Starter Kit ($7.00)

K8IQY Magic Box TR Switching System ($44.00)

K8IQY SS-40 Stable and Sensitive 40M Receiver  ($50.00)

K8IQY SAVXO Stand Alone VXO ($24.00)

KD1JV Tenna Dipper ($35.00)

 I also have a built NS-40 Class E Transmitter that I will throw in if you want it.

 

Please email me through @arrl.net  if interested.
Jerry, WU1U


Unbuilt 4SQRP Kits

Jerry Fay
 

I am going through the process of preparing for possible relocation.  That has led to reviewing a number of boxes that came from a previous move that had not been opened. I found the following unbuilt kits from 4SQRP and do see an opportunity to build them.  I do not wish to parcel them out so if someone is willing to buy the lot at my cost of $160 I will pay to ship them to you.

Four State Dummy Load SMD Starter Kit ($7.00)

K8IQY Magic Box TR Switching System ($44.00)

K8IQY SS-40 Stable and Sensitive 40M Receiver  ($50.00)

K8IQY SAVXO Stand Alone VXO ($24.00)

KD1JV Tenna Dipper ($35.00)

 I also have a built NS-40 Class E Transmitter that I will throw in if you want it.

 

Please email me through @arrl.net  if interested.
Jerry, WU1U


Wednesday Evening 40 and 80 meter Nets - Wed, 05/05/2021 20:00-21:00 #cal-reminder

main@4SQRP.groups.io Calendar <main@...>
 

Reminder: Wednesday Evening 40 and 80 meter Nets

When: Wednesday, 5 May 2021, 20:00 to 21:00, (GMT-05:00) America/Chicago

Where:40 and 80 Meters

View Event

Organizer: jomatlock@...

Description: The 40 Meter Net will be at 8:00 pm central time (DST)  on 7.122 +-. QRM
NCS is WQ5RP/ACØBQ 

Wednesday evening 80 Meter CW Net. will be at  (8:30PM Central Time Wednesday (DST). 



The 80 meter net will be called on 3.564 MHz +/- QRM.
Net control operator is Johnny ACØBQ 

* NEW *  Wednesday evening DMR Voice Net will be at (Thursday) 02:00 UTC (9:00PM Central dst Time Wednesday/)
Four States QRP has a Brandmeister DMR Talk Group (TG31654). Join us to discuss QRP, ask questions, or just ragchew. The Wednesday net is a directed net  but any other time you may use the Talk Group to chat with other QRPers.
Net Control operator is Bert NØYJ.


Re: Morse Code wins again

davemrtn
 

I agree with you 100% about today's journalist.

They are just like the big guy (that I will leave unnamed), they just read the prompter and have no idea what they are talking about.

At least Morse Code got a mention in the media and some other miss-informed person might say " Hey, I ought to learn Morse Code ! ".

David Martin - NA1MH - Mountain Home, Ar. -----------------------------------------
Wherever I go, there He is.


On 5/3/2021 6:52 PM, n4mj via groups.io wrote:
then, maybe he just got lucky. lol or HI  My first thoughts after reading about this in the news was - does the writer (so called journalist) even know what Morse code is?  My opinion of journalists these days isn't very good. 
n4mj


 
PLEASE REMOVE all email addresses before you send it on and use BCC option when forwarding"
  Thank you! 



On Monday, May 3, 2021, 06:47:02 PM CDT, Tom Sevart <tmsevart@...> wrote:


On 5/2/2021 19:48, Ted via groups.io wrote:
> More like DTMF.  This is quickly becoming an urban legend.
>

That's what I said on the QRZ.com forums thread.  I seriously doubt that
any security keypad was using Morse code.  I don't doubt the elderly
couple may have had a history of using Morse code in the military,
possibly giving them the ability to listen to the keypad with a lot of
surrounding noise, but they most likely weren't sitting there copying
Morse code but listening for the proper DTMF tones.


--
Tom Sevart N2UHC
St. Paul, KS

--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus







Re: Use of a small amp to boost the 5 W Paraset output

Timothy Fidler
 

If you use the 50 W CW  KIT amp from Qrp Labs (about $30 USD) you will get 14 W true out on 40 M with a 14 V supply. that 's another 5.5 dB of signal at the far end.   That amp will produce 45 W but only on a 22 VDC supply.  It is specifically designed for QSK CW work though mods to make it a SSB amp are possible.

If  you equip it with "bend pin "  RD16HH mosfets you will get up to 20 W of clean  CW rf out  on 40 mtrs. THe efficiency will be about 55 percent.  The RD16HHs can be got for about $12 a pair from Ebay Schenzen etc  (if you go too cheap you will get fakes ) . Hans Summers ex  Qrp labs does  not sell those parts  . THe RD16s are vastly better from a thermal  point of view.

NB you need to get  an RX / TX 5V  TTL signal out of the BJ to the  power amp to control it the rx tx switching . that could be an issue - you may need to fit a TDO timer (CMOS 555) based on the CW key  down so you will get only semi qsk in that case. 

The 50W CW amp is one off the deals of the century in  terms of what you get for the money.  The only ones that don't work  are the ones where someone on cocaine wound the RF transformers  or soldered the puppy up.  If you do build one,  consider fitting  dpdt relays and a second filter set so you  make it dual band. 

regards, TEF 


Re: Use of a small amp to boost the 5 W Paraset output

Dale Putnam
 

Hi John,
  I monitor the bands most all day, can be on at a good time for you?

Have a great day,

Dale - WC7S in Wy

"Actions speak louder than words"


From: main@4SQRP.groups.io <main@4SQRP.groups.io> on behalf of John - KK4ITX via groups.io <jleahy00@...>
Sent: Saturday, May 1, 2021 5:44 PM
To: main@4sqrp.groups.io <main@4sqrp.groups.io>
Subject: Re: [4SQRP] Use of a small amp to boost the 5 W Paraset output
 
All I use with my 5w rigs is an enfed.  Cost is under $20 , easy to set up and use.  Got France from Florida with one a few months ago and only need WY for WAS.

Good luck with the BJ, just finished building mine yesterday, now need some power and run it through the paces.

GL, see you on the air.

John
KK4ITX 



🙃Each mistake is a learning opportunity.🙂

On May 1, 2021, at 5:12 PM, N7RKC, Mike via groups.io <emwizo@...> wrote:


Are there any rules governing the use of a 10W booster amp to compensate for the lack of a decent antenna with a Paraset. ???
Thanks //Michael T. - N7RKC

421 - 440 of 24812