Date   

Re: Emails getting thru or not? K4UPG 4SQRP 117

WA0ITP
 

Kelly, Randy, and all:
 
This is my fault, I made up the Second Sunday Sprint note that Dave uploaded to the web site, and thought that it would be good to have a descriptive email address for it, as we do for the 4x4 sprint. 
 
I suggest that everyone send their scores directly to Walter at spike55@... 
 
I apoligize for the inconvenience and frustration.
 
----------------------------------
Real radios weigh less than a pound.
I love this radio stuff !
72   WA0ITP
www.wa0itp.com
www.4sqrp.com
 
 
 

----- Original Message -----
To: 4x4@...
Sent: Wednesday, October 16, 2013 7:34 AM
Subject: Emails getting thru or not? K4UPG 4SQRP 117

I've now sent 4 emails about my 4x4 score not being included in the list. I sent the original email per instructions to this email address from my kmacker@... address on 10/5/2013 at 8:22 PM EDT a few minutes later I sent my comments to the Yahoo Group. But my score was not in the list that was posted to the group later. I've sent 3 more emails and do not seem to be getting through to anyone. I screenshot of the original email I sent is included so you can see it was sent, there was no error or bounce message received. I am a sys admin on a 4000 user secure email system for missionaries that covers the globe. I am used to email issues but this one traces thru without problems via the test tools that I have available to check routing and delivery. Perhaps the new gmail.com format is causing email to be put in the new tabs which are easy to overlook.

I'm a contest point giver so not a big deal to not be listed, but as a computer geek, there is a problem with the system if email and spreadsheets do not work or arrive at the destination.

Using my third email to see if it gets thru to anyone and copying Terry on this so it is not lost in the ether as my 2watt sig often is. Is anyone out there?  

You may know me by my K4UPG  callsign and member #117 -- this is one of  my ministry emails... :-)
--

in HIM,
Rev. Kelly E. McClelland, Chief Navigation Officer, Certified Career Mgmt and Tough Transitions Coach
Transition Time Coach LLC, http://www.transitiontimecoach.com

kelly@... --  (407)545-6140


Re: SPRINT (SS)

Walter - K5EST
 

Hi Randy, I have your SSS report.
Thank you!.......de K5EST

...get your QRP on--->4SQRP...

On Oct 15, 2013 11:07 PM, <KB4QQJ@...> wrote:
 

I seem to be having a problem getting email delivered to:
sss at 4sqrp dot com ??
Am I misreading what it on the web site? Or just plain messing up  the address.... heh heh
 
In any case here is my sprint log such as it was.
I'll keep trying to get it to Walter via the sss address.
 
72 for now,
Randy_KB4QQJ
 
 
 
Hey,
It's not much but all I could manage for the short time  got to play.
always fun and looking forward to the next one.
Eight (8) contacts
MODE = CW

72 for now,
Randy_KB4QQJ

General Logging
40m   CW  10/14/13  0100  WA0ITP       599         599   IA   TERRY
40m   CW  10/14/13  0109  W0IIT        559         599   KS   WILLIAM
40m   CW  10/14/13  0113  W2SH         599         599   NJ   CHARLES
40m   CW  10/14/13  0120  KV6Z         559         599   OK   WILLIAM
40m   CW  10/14/13  0122  WA4ZOF       559         599   AL   RODMAN
40m   CW  10/14/13  0124  KB5FCF       559         599   OK   JOEL
80m   CW  10/14/13  0132  W2SH         599         599   NJ   CHAS
30m   CW  10/14/13  0139  E71A         599         599    Bosnia / Herzegovina     EMIL
 
Delivery to the following recipient failed permanently:

     sss@...

Technical details of permanent failure:
Google tried to deliver your message, but it was rejected by the server for the recipient domain 4sqrp.com by mx00.1and1.com. [74.208.5.3].

The error that the other server returned was:
550 <sss@...>: invalid address


Re: SPRINT (SS)

kb4qqj
 

Tried this one also with the same result, obviously I've done something wrong.
 
 
Randy_KB4QQJ
 

Delivery to the following recipient failed permanently:

     spike55@...

Technical details of permanent failure:
DNS Error: DNS server returned answer with no data



SPRINT (SS)

kb4qqj
 

I seem to be having a problem getting email delivered to:
sss at 4sqrp dot com ??
Am I misreading what it on the web site? Or just plain messing up  the address.... heh heh
 
In any case here is my sprint log such as it was.
I'll keep trying to get it to Walter via the sss address.
 
72 for now,
Randy_KB4QQJ
 
 
 
Hey,
It's not much but all I could manage for the short time  got to play.
always fun and looking forward to the next one.
Eight (8) contacts
MODE = CW

72 for now,
Randy_KB4QQJ

General Logging
40m   CW  10/14/13  0100  WA0ITP       599         599   IA   TERRY
40m   CW  10/14/13  0109  W0IIT        559         599   KS   WILLIAM
40m   CW  10/14/13  0113  W2SH         599         599   NJ   CHARLES
40m   CW  10/14/13  0120  KV6Z         559         599   OK   WILLIAM
40m   CW  10/14/13  0122  WA4ZOF       559         599   AL   RODMAN
40m   CW  10/14/13  0124  KB5FCF       559         599   OK   JOEL
80m   CW  10/14/13  0132  W2SH         599         599   NJ   CHAS
30m   CW  10/14/13  0139  E71A         599         599    Bosnia / Herzegovina     EMIL
 
Delivery to the following recipient failed permanently:

     sss@...

Technical details of permanent failure:
Google tried to deliver your message, but it was rejected by the server for the recipient domain 4sqrp.com by mx00.1and1.com. [74.208.5.3].

The error that the other server returned was:
550 : invalid address


Re: keying circuit

Tom Sevart
 

On 10/14/2013 21:25, n0jrn wrote:
Gang:

IF you have an electronic keyer and you want to use
it with multiple rigs without plugging and unplugging
all the time, what circuit would you use to switch
between rigs.
I think I'd just use a simple rotary switch. I've got a couple of 12 position switches which are adjustable from 2 to 12 positions. Just connect a common ground and then have the input connected to the switch common, and then each rig connected to one of the switch positions.

--
Tom Sevart N2UHC
St. Paul, KS


Re: New EZ Keyer Kit

Craig Johnson, AA0ZZ
 

Jim,

Congratulations on #1.   Hope you enjoy using the EZkeyer.


Best Regards,

-Craig, AA0ZZ




---In 4sqrp@..., <w0eb@..., 4sqrp@...> wrote:

Got my order in first and much to my surprise, the Post Office delivered today!  Packages only, but they were delivering them.  Opened the box at 4:00 p.m and had the kit completed by 4:45.  No battery pack yet, so not tested, but all the soldering and mechanicals are done.  Took just 45 minutes from start to finish and would have been shorter but one of the little screws had buggered up threads.  I had to dig one out of my storage box, but that wasn't a big problem.  
 
Found at least one instruction missing in the on-line assembly manual.  Didn't find anywhere a step to install the .1ufd capacitor, C1.  An inexperienced or first time kit builder might miss this.  
 
Also Q1 and Q2, the two MOSFET transistors are labeled U2 and U3 on the board's silkscreen.  Since the U designation is for IC's and the Q designator for transistors this might confuse some new(er) kit builders.
 
None of the errata found is earth-shattering, but you guys might want to be prepared to field lots of questions.
 
Jim Sheldon W0EB
EZ-Keyer II number one


Fw: REMINDER - 2013 Iowa QSO Party

WA0ITP
 

The IAQSO Party is THIS SATURDAY OCTOBER 19, 2013 FROM 1400Z - 2300Z (9AM - 6PM
CENTRAL TIME). Official notice is below my notes.

Three new catagories have been added this year - Two QRP QRP catagories, In
State QRP Stations and Out Of State QRP Stations, as well as a JOTA catagory.
Well known QRP Designer David Cripe, NM0S, is a JOTA vounteer, NM0S will be
operating at Camp Waubeek, for both the Mt. Vernon and Lisbon, IA troops.

Also Marshall, W0OTM, has added an online Summary & Entry Form,
http://www.wa0dx.org/IAQSO/SummaryEntryForm.php

He has also added a web page which reports total scores by catagory for the
event and is updated in REAL TIME as new entries are submitted! Watch the scores
climb.
http://www.wa0dx.org/IAQSO/IAQSO_Results.php

So fire up the rigs and work the IAQSO Party this Saturday, cu there.

----------------------------------
Real radios weigh less than a pound.
I love this radio stuff !
72 WA0ITP
www.wa0itp.com
www.4sqrp.com

----------------------------------------------------------

----- Original Message -----
From: W0OTM
To: W0OTM
Sent: Tuesday, October 15, 2013 4:11 PM
Subject: REMINDER - 2013 Iowa QSO Party

Radio Amateurs,

Reminder that the IAQSO Party is THIS SATURDAY OCTOBER 19, 2013 FROM 1400Z -
2300Z (9AM - 6PM CENTRAL TIME).
The purpose of the Iowa QSO Party (IAQSO) is to encourage contact with Iowa
amateur radio stations by other Iowa hams and hams worldwide. Stations outside
of Iowa work Iowa stations only. Iowa stations work everybody, including other
Iowa stations.

A complete listing of the contest rules can be found HERE at the 2013 IAQSO
Party Homepage.

This year we have several exciting changes to the IAQSO Contest Rules:

First, we have added two additional Entry Classes for QRP Stations. (Iowa QRP
and Out of State QRP) MANY of you have express interest in operating and
competing in this class.

Second, we have changed the Bonus Points by adding a new feature this year in an
effort to support JOTA. The Jamboree-on-the-Air, or JOTA, is an annual Scouting
event that uses amateur radio to link Scouts around the world, around the
nation, and in your own community. In the IAQSO, 100 Bonus Points (Max 500)
will be awarded for EACH JOTA station contact made.

As usual the WA0DX - Ottumwa Amateur Radio Club callsign will also be an added
100pt Bonus!

In addition, we have a NEW process for submitting your Contest Summary/Entry
Sheet and electronic logs. We have developed an automated - ELECTRONIC SUMMARY
& LOG SUBMISSION FORM - . This will ensure everyone's entries are process
quickly and correctly. Also, once you have submitted your Summary/Entry Sheet,
you can follow the scoring process, and see where you rank against other IAQSO
Participants by visiting: LIVE 2013 IAQSO PARTY STANDINGS. This page is updated
in REAL TIME as new entries are submitted!

We look forward to seeing you on the bands this weekend! Have Fun!

If you have any questions, please contact IAQSO@WA0DX.ORG.


New EZ Keyer Kit

Bill VanKirk
 

I received my EZ Keyer kit this morning. I love it! It took less than an hour to build and is a great addition to the shack.

Everything went together well and the case looks very nice. Better than the picture on the Web site.

Well done!


72
Bill
W0PT


Re: keying circuit

 

* On 2013 14 Oct 22:42 -0500, n0jrn wrote:
Thanks Nate:

BUT, I have all the isolation I need inside the electronic
keyer. I just want to switch it's output to multiple rigs
and not sure if I need anything to protect from RF etc.

I'm looking into this for a friend and he wants to use his
keyer on 4 seperate rigs without plugging and unplugging.
I guess I missed that part. I was assuming keying all at once.

72, de Nate >>

--

"The optimist proclaims that we live in the best of all
possible worlds. The pessimist fears this is true."

Ham radio, Linux, bikes, and more: http://www.n0nb.us


Re: keying circuit

Wayne Dillon
 

I have a similar set-up. electronic keyer and a rotary switch, however, being the kinda person I am I added jacks at the back of the box for paddle input and straight key, the straight key is parallel with the keyer output. Speed control and memory buttons on the front along with led's to indicate which output I'm switched to and viola. I know, a little over the top but hey, we all march to our own beat right?
72/3 es God Bless de Wayne - KC0PMH


On Mon, Oct 14, 2013 at 9:25 PM, n0jrn <n0jrn@...> wrote:
 

Gang:

IF you have an electronic keyer and you want to use
it with multiple rigs without plugging and unplugging
all the time, what circuit would you use to switch
between rigs.

Electronic keyer would go to the switch and switch
to multiple outputs.

Doesn't seem like it would take much more than the
switch but would you use diodes on the outputs,
capacitors on the grounds ??

Just curious.

thanks;

Jerry N0JRN




--
http://www.qsl.net/kc0pmh/   Under construction but please visit anyway.
 
QRP -  EFFICIENCY AND SKILL, NOT POWER. 
 
I'm British by birth but American by CHOICE!

Jesus came to pay a debt He didn't owe because we owe a debt we cannot pay...

The Lord bless you and keep you
The Lord make His face shine upon you, and be gracious unto you
The Lord lift up his contenance upon you and give you peace.

God Bless from Wayne Dillon - KC0PMH

Joshua 24:14-15
2 Cor 5:17
1 Jn 2:17
 

4 State QRP Group NCS - 40m & 160m
4SQRP #95
FPQRP #342 (Flying Pigs QRP Club)
G-QRP-C #11504
NAQCC # 0759
QRP-ARCI #11505
SKCC #1155C
SOC #848
30MDG#1176
NEQRP #693
GORC #192


Re: keying circuit

davemrtn
 

I agree, you should not tie all the grounds together, it can cause problems... been there done that.

You can get a 3 pole rotary switch from Jameco and that will allow you to switch 3 circuits.� You'd want to do this if you are using an iambic key.

You will need to mount any jacks used on a non-metalic surface to keep the ground circuits isolated from each other.

On 10/14/2013 10:57 PM, Todd F. Carney / K7TFC wrote:
�

I'm with WB9DLC. A rotary switch is the way to go. Use one pole for the signal and one for each ground. That is, don't use a common ground. Run a separate ground from each radio.

Also, I'd be inclined to use a "break-before- make" rotary rather than a "make- before-break" variety.

Best

Todd

On Oct 14, 2013 8:46 PM, "WB9DLC - Mike Barrell" <wb9dlc@...> wrote:
�

Radio Shack has a 2 pole 6 pos. Switch Model: 275-1386.

Can't imagine making it any more complicated.

73
Mike - WB9DLC
HTTP://wb9dlc.com

���

On Oct 14, 2013 11:40 PM, "n0jrn" <n0jrn@...> wrote:
�

Thanks Nate:

BUT, I have all the isolation I need inside the electronic
keyer. I just want to switch it's output to multiple rigs
and not sure if I need anything to protect from RF etc.

I'm looking into this for a friend and he wants to use his
keyer on 4 seperate rigs without plugging and unplugging.

I don't see much of a problem with just switching the output
of the keyer.

Just curious if I need to protect the circuit in some fashion.

73 Jerry

----- "Nate Bargmann" <n0nb@...> wrote:

> * On 2013 14 Oct 21:26 -0500, n0jrn wrote:
> > Gang:
> >
> > IF you have an electronic keyer and you want to use
> > it with multiple rigs without plugging and unplugging
> > all the time, what circuit would you use to switch
> > between rigs.
> >
> > Electronic keyer would go to the switch and switch
> > to multiple outputs.
> >
> > Doesn't seem like it would take much more than the
> > switch but would you use diodes on the outputs,
> > capacitors on the grounds ??
>
> Seems like the ideal application for optocouplers. Bias one for
> positive keying and the other for negative keying (TS-520, TS-830,
> etc.). Use as many as needed for multiple rig outputs. Isolation
> between rigs and between the tigs and keyer.
>
> 72, de Nate >>
>
> --
>
> "The optimist proclaims that we live in the best of all
> possible worlds. The pessimist fears this is true."
>
> Ham radio, Linux, bikes, and more: http://www.n0nb.us
>
>
> ------------------------------------
>
> 4SQRP Website: http://4sqrp.com
> OzarkCon is coming April 4-5, 2014 in Branson, MO
> View Details at http://www.ozarkcon.com/index.phpYahoo! Groups Links
>
>
>



--
David Martin - K5DCM ---o0o---
Mountain Home, Arkansas

Guns don't kill people, any more than spoons & forks cause obesity.
I guess most people don't think because it's too tedious for them!
What I like about naps is, I can get them done while I'm sleeping.
If they can, they do; without thinking if they should.

�


Re: keying circuit

Todd K7TFC
 

I'm with WB9DLC. A rotary switch is the way to go. Use one pole for the signal and one for each ground. That is, don't use a common ground. Run a separate ground from each radio.

Also, I'd be inclined to use a "break-before- make" rotary rather than a "make- before-break" variety.

Best

Todd

On Oct 14, 2013 8:46 PM, "WB9DLC - Mike Barrell" <wb9dlc@...> wrote:
 

Radio Shack has a 2 pole 6 pos. Switch Model: 275-1386.

Can't imagine making it any more complicated.

73
Mike - WB9DLC
HTTP://wb9dlc.com

   

On Oct 14, 2013 11:40 PM, "n0jrn" <n0jrn@...> wrote:
 

Thanks Nate:

BUT, I have all the isolation I need inside the electronic
keyer. I just want to switch it's output to multiple rigs
and not sure if I need anything to protect from RF etc.

I'm looking into this for a friend and he wants to use his
keyer on 4 seperate rigs without plugging and unplugging.

I don't see much of a problem with just switching the output
of the keyer.

Just curious if I need to protect the circuit in some fashion.

73 Jerry

----- "Nate Bargmann" <n0nb@...> wrote:

> * On 2013 14 Oct 21:26 -0500, n0jrn wrote:
> > Gang:
> >
> > IF you have an electronic keyer and you want to use
> > it with multiple rigs without plugging and unplugging
> > all the time, what circuit would you use to switch
> > between rigs.
> >
> > Electronic keyer would go to the switch and switch
> > to multiple outputs.
> >
> > Doesn't seem like it would take much more than the
> > switch but would you use diodes on the outputs,
> > capacitors on the grounds ??
>
> Seems like the ideal application for optocouplers. Bias one for
> positive keying and the other for negative keying (TS-520, TS-830,
> etc.). Use as many as needed for multiple rig outputs. Isolation
> between rigs and between the tigs and keyer.
>
> 72, de Nate >>
>
> --
>
> "The optimist proclaims that we live in the best of all
> possible worlds. The pessimist fears this is true."
>
> Ham radio, Linux, bikes, and more: http://www.n0nb.us
>
>
> ------------------------------------
>
> 4SQRP Website: http://4sqrp.com
> OzarkCon is coming April 4-5, 2014 in Branson, MO
> View Details at http://www.ozarkcon.com/index.phpYahoo! Groups Links
>
>
>


Re: keying circuit

WB9DLC - Mike Barrell <wb9dlc@...>
 

Radio Shack has a 2 pole 6 pos. Switch Model: 275-1386.

Can't imagine making it any more complicated.

73
Mike - WB9DLC
HTTP://wb9dlc.com

   

On Oct 14, 2013 11:40 PM, "n0jrn" <n0jrn@...> wrote:
 

Thanks Nate:

BUT, I have all the isolation I need inside the electronic
keyer. I just want to switch it's output to multiple rigs
and not sure if I need anything to protect from RF etc.

I'm looking into this for a friend and he wants to use his
keyer on 4 seperate rigs without plugging and unplugging.

I don't see much of a problem with just switching the output
of the keyer.

Just curious if I need to protect the circuit in some fashion.

73 Jerry

----- "Nate Bargmann" <n0nb@...> wrote:

> * On 2013 14 Oct 21:26 -0500, n0jrn wrote:
> > Gang:
> >
> > IF you have an electronic keyer and you want to use
> > it with multiple rigs without plugging and unplugging
> > all the time, what circuit would you use to switch
> > between rigs.
> >
> > Electronic keyer would go to the switch and switch
> > to multiple outputs.
> >
> > Doesn't seem like it would take much more than the
> > switch but would you use diodes on the outputs,
> > capacitors on the grounds ??
>
> Seems like the ideal application for optocouplers. Bias one for
> positive keying and the other for negative keying (TS-520, TS-830,
> etc.). Use as many as needed for multiple rig outputs. Isolation
> between rigs and between the tigs and keyer.
>
> 72, de Nate >>
>
> --
>
> "The optimist proclaims that we live in the best of all
> possible worlds. The pessimist fears this is true."
>
> Ham radio, Linux, bikes, and more: http://www.n0nb.us
>
>
> ------------------------------------
>
> 4SQRP Website: http://4sqrp.com
> OzarkCon is coming April 4-5, 2014 in Branson, MO
> View Details at http://www.ozarkcon.com/index.phpYahoo! Groups Links
>
>
>


Re: keying circuit

n0jrn <n0jrn@...>
 

Thanks Nate:

BUT, I have all the isolation I need inside the electronic
keyer. I just want to switch it's output to multiple rigs
and not sure if I need anything to protect from RF etc.

I'm looking into this for a friend and he wants to use his
keyer on 4 seperate rigs without plugging and unplugging.

I don't see much of a problem with just switching the output
of the keyer.

Just curious if I need to protect the circuit in some fashion.

73 Jerry

----- "Nate Bargmann" <n0nb@n0nb.us> wrote:

* On 2013 14 Oct 21:26 -0500, n0jrn wrote:
Gang:

IF you have an electronic keyer and you want to use
it with multiple rigs without plugging and unplugging
all the time, what circuit would you use to switch
between rigs.

Electronic keyer would go to the switch and switch
to multiple outputs.

Doesn't seem like it would take much more than the
switch but would you use diodes on the outputs,
capacitors on the grounds ??
Seems like the ideal application for optocouplers. Bias one for
positive keying and the other for negative keying (TS-520, TS-830,
etc.). Use as many as needed for multiple rig outputs. Isolation
between rigs and between the tigs and keyer.

72, de Nate >>

--

"The optimist proclaims that we live in the best of all
possible worlds. The pessimist fears this is true."

Ham radio, Linux, bikes, and more: http://www.n0nb.us


------------------------------------

4SQRP Website: http://4sqrp.com
OzarkCon is coming April 4-5, 2014 in Branson, MO
View Details at http://www.ozarkcon.com/index.phpYahoo! Groups Links



Re: keying circuit

 

* On 2013 14 Oct 21:26 -0500, n0jrn wrote:
Gang:

IF you have an electronic keyer and you want to use
it with multiple rigs without plugging and unplugging
all the time, what circuit would you use to switch
between rigs.

Electronic keyer would go to the switch and switch
to multiple outputs.

Doesn't seem like it would take much more than the
switch but would you use diodes on the outputs,
capacitors on the grounds ??
Seems like the ideal application for optocouplers. Bias one for
positive keying and the other for negative keying (TS-520, TS-830,
etc.). Use as many as needed for multiple rig outputs. Isolation
between rigs and between the tigs and keyer.

72, de Nate >>

--

"The optimist proclaims that we live in the best of all
possible worlds. The pessimist fears this is true."

Ham radio, Linux, bikes, and more: http://www.n0nb.us


keying circuit

n0jrn <n0jrn@...>
 

Gang:

IF you have an electronic keyer and you want to use
it with multiple rigs without plugging and unplugging
all the time, what circuit would you use to switch
between rigs.

Electronic keyer would go to the switch and switch
to multiple outputs.

Doesn't seem like it would take much more than the
switch but would you use diodes on the outputs,
capacitors on the grounds ??

Just curious.

thanks;

Jerry N0JRN


Re: New EZ Keyer Kit

Jim Sheldon
 

A simple errata sheet should take care of it.  You might also mention that the washers on the push buttons should go on the underside of the top cover with the nuts on top.  Having the washers on the underside of the cover works great to keep the spacing right so no strain is put on the 3 jacks once things are tightened down.  
 
I've done some tech writing in my day and wrote a whole bunch of lesson plans when I taught electronics in the Army back in the 60's, 70's and early 80's so I know how you can have a whole bunch of proof readers check things, but until someone actually uses the instructions to build the device, you won't catch all the errors and maybe not even then, LOL.
 
Seriously, those were the only errors I could find and I absolutely love the way the case looks made out of the PC board.  That is one fine idea and not difficult to put together at all as long as you pay attention to the directions.
 
I never do unless I run into trouble, and I just use my miter saw's table as a jig and press the bottom and a long side tight to the 90 degree wall & base.  It's easy to tack solder the two pieces, swap sides and do the second side the same way.  Once the two sides are on the base, the end pieces get done the same way and it all winds up square, no tape needed.  The tape/rubber band method is probably the best for those who don't have the tools I do though.  No matter how you do it, get it square and it really looks professional.
 
Jim Sheldon - W0EB

> Thanks Jim for the corrections!
> We all read the new assembly and must have missed these details!
> Please mark urs with ser Nr 1, hi hi! 72 Johnny ac0bq
>
> On Monday, October 14, 2013, Jim Sheldon  wrote:
>>
>>
>> Got my order in first and much to my surprise, the Post Office
>> delivered today!  Packages only, but they were delivering them.  
>> Opened the box at 4:00 p.m and had the kit completed by 4:45.  No
>> battery pack yet, so not tested, but all the soldering and
>> mechanicals are done.  Took just 45 minutes from start to finish
>> and would have been shorter but one of the little screws had
>> buggered up threads.  I had to dig one out of my storage box, but
>> that wasn't a big problem.  
>>
>>
> Found at least one instruction missing in the on-line assembly
> manual.  Didn't find anywhere a step to install the .1ufd
> capacitor, C1.  An inexperienced or first time kit builder might
> miss this.  
>
>>
> Also Q1 and Q2, the two MOSFET transistors are labeled U2 and U3 on
> the board's silkscreen.  Since the U designation is for IC's and
> the Q designator for transistors this might confuse some new(er)
> kit builders.
>
>>
> None of the errata found is earth-shattering, but you guys might
> want to be prepared to field lots of questions.
>
> Jim Sheldon W0EB
> EZ-Keyer II number one
>
>
>


Re: On Air Activirtes Web Page Updated

W0IIT
 

Dave,

Great work! On the activities page! The Excel spread sheet works and looks perfect on my iMac. Now whether it will stay that way when I send it off might be another thing but that will be my problem!!

cu es 72, Bart W0IIT
Pittsburg, KS
4Sqrp = #72, FP= #11, ARS=#568, SKCC=1139, NAQCC=#588 FIST=#5819, Zombie=#500, Geratol=#1000


Re: New EZ Keyer Kit

Johnny AC0BQ
 

Thanks 
Jim for the corrections!
We all read the new assembly and must have missed these details!
Please mark urs with ser Nr 1, hi hi!
72
Johnny ac0bq


On Monday, October 14, 2013, Jim Sheldon wrote:
 

Got my order in first and much to my surprise, the Post Office delivered today!  Packages only, but they were delivering them.  Opened the box at 4:00 p.m and had the kit completed by 4:45.  No battery pack yet, so not tested, but all the soldering and mechanicals are done.  Took just 45 minutes from start to finish and would have been shorter but one of the little screws had buggered up threads.  I had to dig one out of my storage box, but that wasn't a big problem.  
 
Found at least one instruction missing in the on-line assembly manual.  Didn't find anywhere a step to install the .1ufd capacitor, C1.  An inexperienced or first time kit builder might miss this.  
 
Also Q1 and Q2, the two MOSFET transistors are labeled U2 and U3 on the board's silkscreen.  Since the U designation is for IC's and the Q designator for transistors this might confuse some new(er) kit builders.
 
None of the errata found is earth-shattering, but you guys might want to be prepared to field lots of questions.
 
Jim Sheldon W0EB
EZ-Keyer II number one


Wired & Tested 4S Link has been spoken for

Jim Sheldon
 

The wired, tested and modified 4S Link I had listed has been spoken for.
 
Jim Sheldon - W0EB