Date   

Re: Sprint

Paul Smith
 

I worked one and hear no one else

de Paul N0NBD

Sent from my iPad

On Nov 10, 2013, at 7:35 PM, "WA0ITP" <wa0itp@...> wrote:

 

Any Sprinters out there?

----------------------------------
Real radios weigh less than a pound.
I love this radio stuff !
72 WA0ITP
www.wa0itp.com
www.4sqrp.com


Sprint

WA0ITP
 

Any Sprinters out there?

----------------------------------
Real radios weigh less than a pound.
I love this radio stuff !
72 WA0ITP
www.wa0itp.com
www.4sqrp.com


Re: I noticed that our CW NEts are listed in KAR

WA0ITP
 

I didnt, but thanks to whoever did.

----------------------------------
Real radios weigh less than a pound.
I love this radio stuff !
72 WA0ITP
www.wa0itp.com
www.4sqrp.com

----- Original Message -----
From: Phil Anderson
To: 4sqrp@...
Sent: Sunday, November 10, 2013 9:25 AM
Subject: [4sqrp] I noticed that our CW NEts are listed in KAR




Hi All,

I received my monthly KAR - Kansas Amateur Radio e-newsletter - today
and found our Wed Night nets are listed in it. Nice......guessing you
posted that to them Terry.....in any event, way to go.

Unc Phil in Lawrence.


I noticed that our CW NEts are listed in KAR

Phil Anderson
 

Hi All,

I received my monthly KAR - Kansas Amateur Radio e-newsletter - today
and found our Wed Night nets are listed in it. Nice......guessing you
posted that to them Terry.....in any event, way to go.

Unc Phil in Lawrence.


Re: QRPometer Power to Antenna

Johnny AC0BQ
 

Gm Chuck
I would like a copy, please.
Tnx 
Johnny AC0BQ

"More smiles per Watt!"
Sent from my iPad

On Nov 9, 2013, at 7:45 PM, Chuck Carpenter <w5usj@...> wrote:

 

Gang,

Is there any reason why the QRPometer should not be modified to be
able to read power connected to a DL or to a matched antenna or
antenna via a tuner?

Essentially the change would be to switch the "unknown" leg of the
bridge from the DL to the antenna out jack.

Schematically a single DPDT switch would connect to DL or
antenna. I've drawn a schematic showing the circuit changes if
anyone would like to see the option.

Chuck Carpenter, W5USJ
EM22cv, Rains Co. TX


Re: Signal Check on 7122

Paul Smith
 

Ok tnx

de Paul N0NBD

Sent from my iPad

On Nov 9, 2013, at 7:45 PM, Dale Putnam <daleputnam@...> wrote:

 

I hrd you.. had to run.. but hrd you.

Have a great day,
 
 
--... ...-- Dale - WC7S in Wy
 
 



To: 4sqrp@...; wa0itp@...
From: psmith61@...
Date: Sat, 9 Nov 2013 19:38:42 -0600
Subject: Re: [4sqrp] Signal Check on 7122

 

Did I get a qso? I am tuned up there

de Paul N0NBD

Sent from my iPad

On Nov 9, 2013, at 7:02 PM, "WA0ITP" <wa0itp@...> wrote:

 
Anyone available for a short Q to test my tempory lash up? I've dissassembled
my station, am running on an MTR and have no power output indicator. I'm
setting up for the Sprint tmrrw and want to confirm that I'm getting out.
----------------------------------
Real radios weigh less than a pound.
I love this radio stuff !
72 WA0ITP
www.wa0itp.com
www.4sqrp.com




Re: Signal Check on 7122

Dale Putnam
 

I hrd you.. had to run.. but hrd you.

Have a great day,
 
 
--... ...-- Dale - WC7S in Wy
 
 



To: 4sqrp@...; wa0itp@...
From: psmith61@...
Date: Sat, 9 Nov 2013 19:38:42 -0600
Subject: Re: [4sqrp] Signal Check on 7122

 

Did I get a qso? I am tuned up there

de Paul N0NBD

Sent from my iPad

On Nov 9, 2013, at 7:02 PM, "WA0ITP" <wa0itp@...> wrote:

 
Anyone available for a short Q to test my tempory lash up? I've dissassembled
my station, am running on an MTR and have no power output indicator. I'm
setting up for the Sprint tmrrw and want to confirm that I'm getting out.
----------------------------------
Real radios weigh less than a pound.
I love this radio stuff !
72 WA0ITP
www.wa0itp.com
www.4sqrp.com




QRPometer Power to Antenna

Chuck Carpenter
 

Gang,

Is there any reason why the QRPometer should not be modified to be able to read power connected to a DL or to a matched antenna or antenna via a tuner?

Essentially the change would be to switch the "unknown" leg of the bridge from the DL to the antenna out jack.

Schematically a single DPDT switch would connect to DL or antenna. I've drawn a schematic showing the circuit changes if anyone would like to see the option.



Chuck Carpenter, W5USJ
EM22cv, Rains Co. TX


Re: Signal Check on 7122

Paul Smith
 

Did I get a qso? I am tuned up there

de Paul N0NBD

Sent from my iPad

On Nov 9, 2013, at 7:02 PM, "WA0ITP" <wa0itp@...> wrote:

 

Anyone available for a short Q to test my tempory lash up? I've dissassembled
my station, am running on an MTR and have no power output indicator. I'm
setting up for the Sprint tmrrw and want to confirm that I'm getting out.
----------------------------------
Real radios weigh less than a pound.
I love this radio stuff !
72 WA0ITP
www.wa0itp.com
www.4sqrp.com


Re: Signal Check on 7122

Dale Putnam
 

Be there in just a couple

Have a great day,
 
 
--... ...-- Dale - WC7S in Wy
 
 



To: 4sqrp@...
From: wa0itp@...
Date: Sat, 9 Nov 2013 19:02:02 -0600
Subject: [4sqrp] Signal Check on 7122

 
Anyone available for a short Q to test my tempory lash up? I've dissassembled
my station, am running on an MTR and have no power output indicator. I'm
setting up for the Sprint tmrrw and want to confirm that I'm getting out.
----------------------------------
Real radios weigh less than a pound.
I love this radio stuff !
72 WA0ITP
www.wa0itp.com
www.4sqrp.com



Signal Check on 7122

WA0ITP
 

Anyone available for a short Q to test my tempory lash up? I've dissassembled
my station, am running on an MTR and have no power output indicator. I'm
setting up for the Sprint tmrrw and want to confirm that I'm getting out.
----------------------------------
Real radios weigh less than a pound.
I love this radio stuff !
72 WA0ITP
www.wa0itp.com
www.4sqrp.com


SSS - 4SQRP Second Sunday Sprint, 11/10/2013, 7:00 pm

4sqrp@...
 

Reminder from:   4sqrp Yahoo Group
 
Title:   SSS - 4SQRP Second Sunday Sprint
 
Date:   Sunday November 10, 2013
Time:   7:00 pm - 9:00 pm (GMT-06.00) Central Time (US & Canada)
Notes:   The 4SQRP Second Sunday Sprint occurs on the 2nd Sunday of each month from 7-9 PM Central Time. See the 4SQRP web site for details and rules.
 
Copyright © 2013  Yahoo Inc. All Rights Reserved | Terms of Service | Privacy Policy


Re: Any 4S-QRP going to the MW convention?

ka0ncr
 

Hi Kelly,

It sounds good to me. I will try to make it there. I may have to try to bumm a ride with Joe K0NEB, as i think my ride might have something going on. I will copy this email to Joe and also see if I can catch him
in the morning.

I hope to see you there! ( If I can get set up with Joe!)

73. Arnie. KA0NCR



From: Kelly Ellison ;
To: 4sqrp@... <4sqrp@...>; ka0ncr@... ;
Subject: Re: RE: Re: [4sqrp] Any 4S-QRP going to the MW convention?
Sent: Sat, Nov 9, 2013 2:53:51 AM

Arnie and group.  We are in Lebanon now.  I might be around for lunch but probably won't stay around later than that. Can I suggest the waffle house about 11 ish? Will that work for any QRPers? Let us know what you think....

Kelly - WB0WQS




On Wednesday, November 6, 2013 9:46 AM, "ka0ncr@..." wrote:
 
Hi Brad,

Well, there has not been a great number of the group who indicate they will be going.  And
even less who are going to be staying for the whole day on Saturday.

  I had thought about seeing if there would be interest for an informal dinner gathering at some local diner after the
drawing, but that don't look like there would be a lot of interest in that, as most are leaving
to head home right after the drawing, or even before the drawing.

. Mike NF0N and I are staying the night and leaving in the morning as its about a 7 hour drive for me, and Mike has another hour and 1/2 to get home after leaves my place..

Another thought would be the lunch time frame.

So, I thought I would put out feelers to see if there would be interest in that.. maybe a
couple of blocks from the convention site, at the Dairy Queen or one of the others in the 
local area.. ???   Anyone interested? Please post!  Maybe we can still get something organized.


Anyhow..  I'll be walking around wearing a red ball cap with my call on it.. so if you see me,  stop and say "HI"..

73  - Arnie KA0NCR
 


---In 4sqrp@..., wrote:

 I am going to try and make it.
 
Brad
KC0DWV



Re: Any 4S-QRP going to the MW convention?

cbayona <CBayona@...>
 

I'm in Lebanon also but have no clue where the waffle house is.

At 08:53 PM 11/8/2013, you wrote:


Arnie and group. We are in Lebanon now. I might be around for lunch but probably won't stay around later than that. Can I suggest the waffle house about 11 ish? Will that work for any QRPers? Let us know what you think....

Kelly - WB0WQS




On Wednesday, November 6, 2013 9:46 AM, "ka0ncr@..." <ka0ncr@...> wrote:

Hi Brad,

Well, there has not been a great number of the group who indicate they will be going. And
even less who are going to be staying for the whole day on Saturday.

I had thought about seeing if there would be interest for an informal dinner gathering at some local diner after the
drawing, but that don't look like there would be a lot of interest in that, as most are leaving
to head home right after the drawing, or even before the drawing.

. Mike NF0N and I are staying the night and leaving in the morning as its about a 7 hour drive for me, and Mike has another hour and 1/2 to get home after leaves my place..

Another thought would be the lunch time frame.

So, I thought I would put out feelers to see if there would be interest in that.. maybe a
couple of blocks from the convention site, at the Dairy Queen or one of the others in the
local area.. ??? Anyone interested? Please post! Maybe we can still get something organized.


Anyhow.. I'll be walking around wearing a red ball cap with my call on it.. so if you see me, stop and say "HI"..

73 - Arnie KA0NCR



---In 4sqrp@..., <kbradshaw@...> wrote:

I am going to try and make it.

Brad
KC0DWV




--
Cecil - k5nwa
< http://thepartsplace.k5nwa.com/ > < http://www.softrockradio.org/ >

Never take life seriously. Nobody gets out alive anyway.


---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com


Qrpers at the Midwest convention?

wb0wqs <wb0wqs@...>
 

I might be around for lunch but probably won't stay around later than that. Can I suggest the waffle house about 11 ish? Will that work for any QRPers? That's 11AM on Saturday Morning. Let me know if there is any interest in meeting as a group. Otherwise we will keep moving.

Kelly - WB0WQS


Re: Any 4S-QRP going to the MW convention?

Kelly Ellison <wb0wqs@...>
 

Arnie and group.  We are in Lebanon now.  I might be around for lunch but probably won't stay around later than that. Can I suggest the waffle house about 11 ish? Will that work for any QRPers? Let us know what you think....

Kelly - WB0WQS




On Wednesday, November 6, 2013 9:46 AM, "ka0ncr@..." wrote:
 
Hi Brad,

Well, there has not been a great number of the group who indicate they will be going.  And
even less who are going to be staying for the whole day on Saturday.

  I had thought about seeing if there would be interest for an informal dinner gathering at some local diner after the
drawing, but that don't look like there would be a lot of interest in that, as most are leaving
to head home right after the drawing, or even before the drawing.

. Mike NF0N and I are staying the night and leaving in the morning as its about a 7 hour drive for me, and Mike has another hour and 1/2 to get home after leaves my place..

Another thought would be the lunch time frame.

So, I thought I would put out feelers to see if there would be interest in that.. maybe a
couple of blocks from the convention site, at the Dairy Queen or one of the others in the 
local area.. ???   Anyone interested? Please post!  Maybe we can still get something organized.


Anyhow..  I'll be walking around wearing a red ball cap with my call on it.. so if you see me,  stop and say "HI"..

73  - Arnie KA0NCR
 


---In 4sqrp@..., wrote:

 I am going to try and make it.
 
Brad
KC0DWV



SSS - 4SQRP Second Sunday Sprint, 11/10/2013, 7:00 pm

4sqrp@...
 

Reminder from:   4sqrp Yahoo Group
 
Title:   SSS - 4SQRP Second Sunday Sprint
 
Date:   Sunday November 10, 2013
Time:   7:00 pm - 9:00 pm (GMT-06.00) Central Time (US & Canada)
Notes:   The 4SQRP Second Sunday Sprint occurs on the 2nd Sunday of each month from 7-9 PM Central Time. See the 4SQRP web site for details and rules.
 
Copyright © 2013  Yahoo Inc. All Rights Reserved | Terms of Service | Privacy Policy


Re: QRPometer Fixer-Upper Success

Johnny AC0BQ
 

Ge Chuck 
We all put covers on the back of ours to keep them from shorting out. I used plexiglas, others have used various things. 
Enjoy you toy 
73
Johnny AC0BQ


On Friday, November 8, 2013, Chuck Carpenter wrote:
 

4SQRPers,

The QRPometer seems to be working thanks to Rich, K8MEG.

Measuring about the same as my WM-2 work-a-like.

Nice piece of equipment and fully portable.

Chuck Carpenter, W5USJ
EM22cv, Rains Co. TX



--
QRP....."more smiles per watt"


QRPometer Fixer-Upper Success

Chuck Carpenter
 

4SQRPers,

The QRPometer seems to be working thanks to Rich, K8MEG.

Measuring about the same as my WM-2 work-a-like.

Nice piece of equipment and fully portable.

Chuck Carpenter, W5USJ
EM22cv, Rains Co. TX


Re: QRPometer Fixer-Upper Info Needed

Rich Fowler <k8meg@...>
 

Hello Chuck,
My recommendation is to go to the photo section on the QRPometer site and compare the board you have with the photos. You can blow up the online photo by Ctrl + or Ctrl forward scroll on mouse. 

There were no PCB revisions other than document changes. The units on the website were prototypes (beta) and the only change that I know about is the 4.7K 5% was later changed to 4.75K 1%. No components were mounted vertically.

Do you have 5V? The biggest problem that I have seen is cold solder. Using lead-free. I know your expertise and I would suggest following your instincts. :-) After verifying component placement, clean the board. Look for obvious things like components installed in wrong vias, diodes backwards, Switch soldering is an issue because of coatings on the solder lugs.

Let me know if meter is displayed. If so, give me the behavior. I have resurrected a few of these kits and it's a great learning experience.

72,
Rich K8MEG