Date   

7122 and Winter's Back

WA0ITP
 

Calling CQ on 7122 for a bit.

The band seems quite this morning, I had to check to see if the antenna was up
after yesterdays heavy wind. 0 here this morning and the high is forcast to be
only +7, the sun is shining.

----------------------------------
Back to the bench, Winter's too valuable to waste.
I love this radio stuff !
72 WA0ITP
www.wa0itp.com
www.4sqrp.com


Re: 14 volt supply

Wayne Dillon
 

John,
Nothing to worry about, I've asked my share of dumb questions in the past, it's all good man.
Have a good one,
72/3 es God Bless de Wayne - KC0PMH


On Sat, Jan 25, 2014 at 7:33 PM, John K4qq <johnk4qq@...> wrote:
 

Please ignore my dumb question in this post, I have figured it out.  Hope everyone has a good week and makes many contacts.  73, John

Sent from my iPad

On Jan 24, 2014, at 3:18 PM, John K4qq <johnk4qq@...> wrote:

 


I recently ordered the 14 volt supply using the URL for Amazon. It is a nice, sturdy unit; however, the connector will not fit my K1. The company offered to refund my money minus the shipping and handling. I have decided to keep it and swap out the connector with one that fits the K1. I have been a ham for 52 years but due to my advanced age I am not as swift on this radio stuff as I used to be hi hi. I have a connector that fits the K1. Question: are the plus and minus wires clearly marked on the 14 volt wire? You fellows have helped me a lot in the past and any help now would be appreciated. John, K4QQ

Sent from my iPad




--
http://www.qsl.net/kc0pmh/   Under construction but please visit anyway.
 
QRP -  EFFICIENCY AND SKILL, NOT POWER. 
 
I'm British by birth but American by CHOICE!

Jesus came to pay a debt He didn't owe because we owe a debt we cannot pay...

The Lord bless you and keep you
The Lord make His face shine upon you, and be gracious unto you
The Lord lift up his contenance upon you and give you peace.

God Bless from Wayne Dillon - KC0PMH

Joshua 24:14-15
2 Cor 5:17
1 Jn 2:17
 

4 State QRP Group NCS - 40m & 160m
4SQRP #95
FPQRP #342 (Flying Pigs QRP Club)
G-QRP-C #11504
NAQCC # 0759
QRP-ARCI #11505
SKCC #1155C
SOC #848
30MDG#1176
NEQRP #693
GORC #192
DMC (Digital Modes Club) # 06686


W0OTM's Four State Combo Pictures

WA0ITP
 

Here's a link to all of Marshalls photos  http://4sqrp.com/kits/w0otmphotopage.html   I also uploaded a link to it on the SS-40, and NS-40 photo pages, and on the NS-40 Builders notes page.  btw the NS-40 and EZKeyer in these pictures have been to space and back.
 
---------------------------------
Back to the bench, Winter's too valuable to waste.
I love this radio stuff !
72   WA0ITP
www.wa0itp.com
www.4sqrp.com
 
 
 

----- Original Message -----
Sent: Sunday, January 26, 2014 8:27 AM
Subject: [4sqrp] Re: My Homebrew 4SQRP T-40 Transceiver COMPLETE

I second John's post!  Beautiful job.  I hope I'll get to see this on display at Ozarkcon! Woody / WD9F


Re: My Homebrew 4SQRP T-40 Transceiver COMPLETE [2 Attachments]

Woody Hester
 

I second John's post!  Beautiful job.  I hope I'll get to see this on display at Ozarkcon! Woody / WD9F


Re: 14 volt supply

John K4qq <johnk4qq@...>
 

Please ignore my dumb question in this post, I have figured it out.  Hope everyone has a good week and makes many contacts.  73, John

Sent from my iPad

On Jan 24, 2014, at 3:18 PM, John K4qq <johnk4qq@...> wrote:

 


I recently ordered the 14 volt supply using the URL for Amazon. It is a nice, sturdy unit; however, the connector will not fit my K1. The company offered to refund my money minus the shipping and handling. I have decided to keep it and swap out the connector with one that fits the K1. I have been a ham for 52 years but due to my advanced age I am not as swift on this radio stuff as I used to be hi hi. I have a connector that fits the K1. Question: are the plus and minus wires clearly marked on the 14 volt wire? You fellows have helped me a lot in the past and any help now would be appreciated. John, K4QQ

Sent from my iPad


Re: My Homebrew 4SQRP T-40 Transceiver COMPLETE [2 Attachments]

priveye997
 

Please let us all know how you made that acrylic enclosure? Beautiful work!!!

72 John NS5Z

Sent from my iPad


Re: My Homebrew 4SQRP T-40 Transceiver COMPLETE [2 Attachments]

Robert
 

very nice

72's
bert
n0yj


On Fri, Jan 24, 2014 at 9:29 PM, W0OTM <w0otm@...> wrote:
 

My latest winter bench project. Been great fun, and even more enjoyable to work so many of you one the air! Thanks to everyone who helped me, Jim, Terry, others!

Check out this video on YouTube:

http://youtu.be/7n6VwRIZ-gs

Custom enclosure made from acrylic, and unique PCB mounting design.







Sent from my iPad


Re: My Homebrew 4SQRP T-40 Transceiver COMPLETE

Johnny AC0BQ
 

Gm Marshall
Nice Job!!!
Now we have another 4sqrp complete station among us!
The enclosure is really neat!
Good work!
72
Johnny AC0BQ


On Friday, January 24, 2014, Michael McShan <w5rst@...> wrote:
 

Excellent job! Well done,OM.


72, Mike W5RST

On Jan 24, 2014, at 9:29 PM, W0OTM <w0otm@...> wrote:

My latest winter bench project. Been great fun, and even more enjoyable to work so many of you one the air! Thanks to everyone who helped me, Jim, Terry, others! 

Check out this video on YouTube:

http://youtu.be/7n6VwRIZ-gs

Custom enclosure made from acrylic, and unique PCB mounting design.





--
QRP....."more smiles per watt"


Re: My Homebrew 4SQRP T-40 Transceiver COMPLETE [2 Attachments]

Michael McShan
 

Excellent job! Well done,OM.

72, Mike W5RST

On Jan 24, 2014, at 9:29 PM, W0OTM <w0otm@...> wrote:

My latest winter bench project. Been great fun, and even more enjoyable to work so many of you one the air! Thanks to everyone who helped me, Jim, Terry, others! 

Check out this video on YouTube:

http://youtu.be/7n6VwRIZ-gs

Custom enclosure made from acrylic, and unique PCB mounting design.




My Homebrew 4SQRP T-40 Transceiver COMPLETE

Marshall Dias
 

My latest winter bench project. Been great fun, and even more enjoyable to work so many of you one the air! Thanks to everyone who helped me, Jim, Terry, others!

Check out this video on YouTube:

http://youtu.be/7n6VwRIZ-gs

Custom enclosure made from acrylic, and unique PCB mounting design.





Sent from my iPad


14 volt supply

John K4qq <johnk4qq@...>
 

I recently ordered the 14 volt supply using the URL for Amazon. It is a nice, sturdy unit; however, the connector will not fit my K1. The company offered to refund my money minus the shipping and handling. I have decided to keep it and swap out the connector with one that fits the K1. I have been a ham for 52 years but due to my advanced age I am not as swift on this radio stuff as I used to be hi hi. I have a connector that fits the K1. Question: are the plus and minus wires clearly marked on the 14 volt wire? You fellows have helped me a lot in the past and any help now would be appreciated. John, K4QQ

Sent from my iPad


Sure wish I was in the shack this morning

Wayne Dillon
 

I sure wish I was in the shack this morning, just looked at activity on dxmaps.com and 10m is jumpin'. I've attached the image but I can't remember if it'll gothrough or not (getting old and the ole memory is not what it was :) )Oh well, back to the grind...
72/3 es God Bless all de Wayne - KC0PMH



--
http://www.qsl.net/kc0pmh/   Under construction but please visit anyway.
 
QRP -  EFFICIENCY AND SKILL, NOT POWER. 
 
I'm British by birth but American by CHOICE!

Jesus came to pay a debt He didn't owe because we owe a debt we cannot pay...

The Lord bless you and keep you
The Lord make His face shine upon you, and be gracious unto you
The Lord lift up his contenance upon you and give you peace.

God Bless from Wayne Dillon - KC0PMH

Joshua 24:14-15
2 Cor 5:17
1 Jn 2:17
 

4 State QRP Group NCS - 40m & 160m
4SQRP #95
FPQRP #342 (Flying Pigs QRP Club)
G-QRP-C #11504
NAQCC # 0759
QRP-ARCI #11505
SKCC #1155C
SOC #848
30MDG#1176
NEQRP #693
GORC #192
DMC (Digital Modes Club) # 06686


Re: Thursday Morning Net

Paul Smith
 

No apology necessary Bart,

Sarah and I were glad to hear you both are better and looking forward to seeing U at Ozarkcon

Paul N0NBD


Re: 160 this morning

Phil Anderson
 

That is cool Jim.............unc Phil in Lawrence.....

73


Re: Thursday Morning Net

W0IIT
 

Sorry for posting this to the net!!

cu es 72, Bart W0IIT
Pittsburg, KS
4Sqrp = #72, FP= #11, ARS=#568, SKCC=1139, NAQCC=#588 FIST=#5819, Zombie=#500, Geratol=#1000


160 this morning

Jim Sheldon
 

Boy!  This is the lowest noise level I've seen on 160 meters in over a year!  Managed to work NH0Z (Marianas Islands) and KH2/N2NL (Guam) right at sunrise this morning with the K3 Barefoot.  Not QRP but still 75 watts on 160 to Guam ain't bad.  Signals were 559 both ways.  I'm still hearing the Guam station on 1815.25 with signals 559 from the Wichita area at 07:40 - he's working split, up-1.
 
Jim - W0EB


Re: Thursday Morning Net [1 Attachment]

W0IIT
 

TERRY,

I was on my PigRig so I’m not sure how wide the band pass is on it. Anyway there was absolutely NO drift that I could notice. The only problem at net time was very deep QSB. It would take you from an honest 599 to almost esp at times. It was on all the stations. I was there from when you first sent QRL to the last dit dit!!!!

I won’t be on this morning. I will be in the process of moving the PigRig once again. Plus I am on the bottom of my gastrointestinal loop which means I am on the pot more than off:-(

We are still giddy around here due to Patsy’s vision improvement. Regardless of the outcome of her left eye, of course, we hope for the best, she has wonderful vision in her right eye!!!!!

cu es 72, Bart


Re: OzarkCON - Whats up with the hotel reservations?

Paul Smith
 

Hello Arnie and others,
I have been working with Terry to get Ozarkcon setup and ready to go. We have a GREAT line up of speakers committed to be there. We have their bios and will set the schedule soon. We have a planning meeting in a couple weeks with the hotel management to set the banquet and saturday lunch. Let's see what else. The room price should be the same as last year and I am sure that the hotel will take reservations anytime. I will get the preregistration opened soon. We will post here as soon as the preregistration is open. Filling Terry's shoes is proving to be a Herculean task. There will be an Ozarkcon. The food will be good and the rest will be a blast as well... Plan on being there April 4 and 5!

de Paul Smith N0NBD

Sent from my iPad

On Jan 23, 2014, at 10:07 PM, <ka0ncr@...> wrote:

 

Hi Group,  


Just was wondering how things are coming along for OzarkCON? 
Its just a little over 2 months away right now, and I have't seen anything about getting hotel reservations yet.

 .Maybe I am jumping the gun, but I thought that last year this info was out by now.   .Getting excited for April to roll around so we can head out  for OzarkCON!

When should we be looking for the reservations to open?  

Thanks to all who make OzarkCON possible!
73 - Arnie KA0NCR


OzarkCON - Whats up with the hotel reservations?

ka0ncr
 

Hi Group,  


Just was wondering how things are coming along for OzarkCON? 
Its just a little over 2 months away right now, and I have't seen anything about getting hotel reservations yet.

 .Maybe I am jumping the gun, but I thought that last year this info was out by now.   .Getting excited for April to roll around so we can head out  for OzarkCON!

When should we be looking for the reservations to open?  

Thanks to all who make OzarkCON possible!
73 - Arnie KA0NCR


Re: Thursday Morning Net

WA0ITP
 

No problem John, we're a Friendly Group.
 
----------------------------------
Back to the bench, Winter's too valuable to waste.
I love this radio stuff !
72   WA0ITP
www.wa0itp.com
www.4sqrp.com
 
 
 

----- Original Message -----
Sent: Thursday, January 23, 2014 12:37 PM
Subject: Re: [4sqrp] Thursday Morning Net

Arrrrgh!  My apologies for the spam to the list.  I'll be more careful with the reply button next time.

73 john k5js