Date   

NAQCC MWN

Mr. Long <nu0s@...>
 

Just a friendly reminder NAQCC MWN tonight Monday 8pm CST 0200 UTC Tuesday 40m 7117 + or - last for 2013... Grab a cup of Coffee and stop in for comments all welcome...

Sent from my iPad

73 Scotty / NU0S / NAQCC MWN NCS
Member 3715


Re: Monday Sideband net

dekle@...
 

QSL Report:

WQ5RP    59*






* (and he sounded very lonely.)





73
Bill
KV6Z


Monday Sideband net

Jeremy Utley
 

Sideband net is up on 7290 right now!


Re: Antenna question

David Martin <davemrtn@...>
 

Those spud gun launchers work great.

I won one at OzarkCon a couple of years ago and I can highly recommend it after using it.  It comes in kit form with all the pieces you need already cut to length and includes the pvc pieces to make the projectiles to launch the rope into the tree.

You can buy the kit at -   http://www.joplin-arc.org/   and the price includes shipping to anywhere in the US.  The Joplin (Missouri) club sells these kits to support club activities.

You'll need an air pump, but if you don't have a small bicycle tire pump you might pick one up at wal-mart or some where and that will allow you to use the launcher on field day.

On 12/29/2014 03:49 PM, 'AG1P Ron' ag1p@... [4sqrp] wrote:
 

I had 80 meter loop at my last home.  It was great antenna.  I used copper-clad steel for wire, ceramic insulators for corners, lexan homemade center connector, black dacron rope to hoist/secure corners and 450 ladder line to a 4:1 baun just outside the shack.  The dacron seemed to give somewhat in the SW MO wind.  Only had to put a corner back up couple times over 6 years.  Hard part was getting back down when we moved.  Feel free to contact me offline for vendors I used or more info. 

 

P.S. one important investment I recommend is to build a spud gun to get line up in the trees. My XYL almost cracked a rib laughing at the other methods I tried before the spud gun.

 

72 – Ron – AG1P

 

 

From: 4sqrp@... [mailto:4sqrp@...]
Sent: Monday, December 29, 2014 10:40 AM
To: 4sqrp@...
Subject: [4sqrp] Antenna question

 

 

 

I would like to get some input on building an 80 meter sky loop antenna that I will use on 80 and other bands with an antenna tuner. I have some nice tall pine trees to run the corners to and I plan on joining the loop to the house with 450 ohm ladder line. Just under the edge of the house I will install a balun and bring it into the house with low loss coax. Please make any comments or offer any advice you can. I am hoping to learn from your experiences. Some questions I have are:

- What kind of wire should I use for the loop antenna

- What type of rope that will hold up to the UV and time (so much just falls apart these days)

- What balun, 4:1, 1:1 ?

- Is 450 ohm feed ladder line the best to use? This part will be about 80 feet long.

- Has anyone ever had any issues using delrin for the insulators?

- I am thinking about placing a screen door spring on each corner to allow the trees to sway in the wind… anyone ever tried that. Or should I just counter weight to opposing corners of the loop?

- How’s the best way to protect this setup from lightning?



--
David Martin - K5DCM ---o0o---
Mountain Home, Arkansas

Guns don't kill people, any more than spoons & forks cause obesity.

Definition: Voter Apathy - When a jerk wearing a robe can overturn the vote of the people, what's the point of voting ?

 


Re: Antenna question

AG1P Ron
 

I had 80 meter loop at my last home.  It was great antenna.  I used copper-clad steel for wire, ceramic insulators for corners, lexan homemade center connector, black dacron rope to hoist/secure corners and 450 ladder line to a 4:1 baun just outside the shack.  The dacron seemed to give somewhat in the SW MO wind.  Only had to put a corner back up couple times over 6 years.  Hard part was getting back down when we moved.  Feel free to contact me offline for vendors I used or more info. 

 

P.S. one important investment I recommend is to build a spud gun to get line up in the trees. My XYL almost cracked a rib laughing at the other methods I tried before the spud gun.

 

72 – Ron – AG1P

 

 

From: 4sqrp@... [mailto:4sqrp@...]
Sent: Monday, December 29, 2014 10:40 AM
To: 4sqrp@...
Subject: [4sqrp] Antenna question

 

 

 

I would like to get some input on building an 80 meter sky loop antenna that I will use on 80 and other bands with an antenna tuner. I have some nice tall pine trees to run the corners to and I plan on joining the loop to the house with 450 ohm ladder line. Just under the edge of the house I will install a balun and bring it into the house with low loss coax. Please make any comments or offer any advice you can. I am hoping to learn from your experiences. Some questions I have are:

- What kind of wire should I use for the loop antenna

- What type of rope that will hold up to the UV and time (so much just falls apart these days)

- What balun, 4:1, 1:1 ?

- Is 450 ohm feed ladder line the best to use? This part will be about 80 feet long.

- Has anyone ever had any issues using delrin for the insulators?

- I am thinking about placing a screen door spring on each corner to allow the trees to sway in the wind… anyone ever tried that. Or should I just counter weight to opposing corners of the loop?

- How’s the best way to protect this setup from lightning?


Re: Antenna question

Paul Smith
 


   Nearly 20 years ago when we were living on our farm I had a loop made with 12 THHN stranded wire. Insulators were egg shaped porcelain. I suspended the loop on the corners and one other place because there was a good tree there. I used more of the THHN wire and window weights for tension. I ran 450 ohm to my home brew tuner and no balen was used. When it stormed I unhooked the feed wire shoved it out the wire tube I had installed in the wall and tied the ends of the feed line together.
My farm was on nearly the highest ground in Allen County so if there was lightning we got it.
I saw the loop more than once sparkling with static. It sure was a good antenna though. It came down in another wind storm and I never put it back up.
Have fun!
 De Paul N0NBD

 

 

I would like to get some input on building an 80 meter sky loop antenna that I will use on 80 and other bands with an antenna tuner. I have some nice tall pine trees to run the corners to and I plan on joining the loop to the house with 450 ohm ladder line. Just under the edge of the house I will install a balun and bring it into the house with low loss coax. Please make any comments or offer any advice you can. I am hoping to learn from your experiences. Some questions I have are:

- What kind of wire should I use for the loop antenna

- What type of rope that will hold up to the UV and time (so much just falls apart these days)

- What balun, 4:1, 1:1 ?

- Is 450 ohm feed ladder line the best to use? This part will be about 80 feet long.

- Has anyone ever had any issues using delrin for the insulators?

- I am thinking about placing a screen door spring on each corner to allow the trees to sway in the wind… anyone ever tried that. Or should I just counter weight to opposing corners of the loop?

- How’s the best way to protect this setup from lightning?


SDR RX kit for HF-1.7 GHz.

ka0ncr
 

Hi Group!

Saw a reference to this on another e-list and I thought that it might be
of interest to some of the people on this list...

It can be used on your computer, or on a Raspberry PI computer, so you could
make it a portable RX or remote the RX and send the data over a network
from the remote site. Looks like a cool device!

http://www.hayseedhamfest.com/ranverter_sdr_261668310.html


Happy new year to all!

73 - Arnie KA0NCR


Antenna question

kb3drw@...
 

 

I would like to get some input on building an 80 meter sky loop antenna that I will use on 80 and other bands with an antenna tuner. I have some nice tall pine trees to run the corners to and I plan on joining the loop to the house with 450 ohm ladder line. Just under the edge of the house I will install a balun and bring it into the house with low loss coax. Please make any comments or offer any advice you can. I am hoping to learn from your experiences. Some questions I have are:

- What kind of wire should I use for the loop antenna

- What type of rope that will hold up to the UV and time (so much just falls apart these days)

- What balun, 4:1, 1:1 ?

- Is 450 ohm feed ladder line the best to use? This part will be about 80 feet long.

- Has anyone ever had any issues using delrin for the insulators?

- I am thinking about placing a screen door spring on each corner to allow the trees to sway in the wind… anyone ever tried that. Or should I just counter weight to opposing corners of the loop?

- How’s the best way to protect this setup from lightning?


FS: SS-40HT(Completed) & SS-40TX Kit

Curtstamp@...
 

Due to some personal situations, I want to sell my SS-40HT which is completed and working and the matching SS-40TX Kit.  The receiver is working and covers The VXO covers 7.099-7.1245.  Will include all the printed manuals with notes.

Price:  $110.00 postpaid to US  Payment by PayPal   

Please email if interested to curtstamp@...   Please use Subject Line: SS40 Shipped upon receipt of payment


Curt Gidding   KC9UNL


Re: MFJ Cub transceiver

Wayne Dillon
 

Good evening Doc,
I have the 20m version and I like it. I inherited it from a Ham chum of mine in the UK when I emigrated here to the USA almost 13 years ago. The mod I made was to fit a BNC antenna receptacle in the hole intended for it just above the RCA antenna receptacle, I've never been a fan of RCA fittings for RF connections.
For the money I thinks it's a grand little wireless and it has been /P with me a few times over the years.
Enjoy, I would go for either the 20m or 40m models. Others may have experience/opinions on the 40m version.
Vy 72/3 es God Bless and HNY. Peace my friend.
Wayne - KC0PMH

On Sun, Dec 28, 2014 at 6:54 PM, Michael McEwen mcewenk5osa@... [4sqrp] <4sqrp@...> wrote:
 

Got s little Christmas money to spend and I was thinking about an MFJ Cub XCVR.  The reviews on it seem to be pretty god for such a simple set.  I cannot build due to an Army injury which rules out any fine motor precision.  I hope to get an LNR LD-5 when they are available, but I need a QRP CW right now.  Advice/input please.

Also, what band/frequencies do you recommend for QRP CW activity.  I am definitely QRS and need advice on the best band/freqs.

Hope you have a safe and happy New Year.

--
73,
Doc K5OSA - QTH: EM04sr
ARRL - LFSARC - 4sqrp #801 - NAQCC #7625

Michael T McEwen
Lt Col, US Army, Ret
PO Box 338
Medicine Park, OK 73557-0338
H:  580 529-3412
C:  580 919-9205




--
http://www.qsl.net/kc0pmh/   Under construction but please visit anyway.
 
QRP -  EFFICIENCY AND SKILL, NOT POWER. 
 
I'm British by birth but American by CHOICE!

Jesus came to pay a debt He didn't owe because we owe a debt we cannot pay...

The Lord bless you and keep you
The Lord make His face shine upon you, and be gracious unto you
The Lord lift up his contenance upon you and give you peace.

God Bless from Wayne Dillon - KC0PMH

Joshua 24:14-15
2 Cor 5:17
1 Jn 2:17
 

4 State QRP Group NCS - 40m & 160m
4SQRP #95
FPQRP #342 (Flying Pigs QRP Club)
NAQCC # 0759
QRP-ARCI #11505
SKCC #1155T
CW Ragchewers Anonymous #40
SOC #848
30MDG#1176
NEQRP #693
GORC #192
DMC (Digital Modes Club) # 06686


MFJ Cub transceiver

Michael McEwen
 

Got s little Christmas money to spend and I was thinking about an MFJ Cub XCVR.  The reviews on it seem to be pretty god for such a simple set.  I cannot build due to an Army injury which rules out any fine motor precision.  I hope to get an LNR LD-5 when they are available, but I need a QRP CW right now.  Advice/input please.

Also, what band/frequencies do you recommend for QRP CW activity.  I am definitely QRS and need advice on the best band/freqs.

Hope you have a safe and happy New Year.

--
73,
Doc K5OSA - QTH: EM04sr
ARRL - LFSARC - 4sqrp #801 - NAQCC #7625

Michael T McEwen
Lt Col, US Army, Ret
PO Box 338
Medicine Park, OK 73557-0338
H:  580 529-3412
C:  580 919-9205


Re: Merry Christmas

Dan Reynolds
 

A bit late -- but here's hoping you all had (or are still having) a blessed Christmas and here's hoping that 2015 is a great year. Ham radio and otherwise.
Hoping to make it to Ozarkcon this year!

Dan -- KB9JLO
<><


I got 1 !!

Dale Putnam
 

Yes Sir!! Sure did.. got 1... just 1.. a lonely 1..
and with 1.. it is tuff to make 2... but at sunrise... it is a sure thing..
somehow.. that lonely 1.. will eventually become 2...  degrees.

with 8 inches of fluffy, dry, just waiting for a wisshp of a breeze to travel...
that lonely 1.. and the white stuff.. is fixin to make it a bit more interesting to get out and
chase after all those... "just gotta have its... can't miss this.... look over heres... ".. as if there
is desire to go run through the crowds, and grab anything with a sale tag on it.  "Save here"...
hmm...

The Stew is on .. you know.. the Stew Perry test?..

http://www.kkn.net/stew/
and I am going to work it.. but first.. a bit of coffee.. then I'm going to tune a bit higher in the band..
about 1.835 - 50... see if I can stay away from the broadcast interference.. until after dark thirty...
Good Luck teasing the Prop Princess.

Have a great day... es night....   even with just 1F

Have a great day,
 
 
--... ...-- Dale - WC7S in Wy
 
 


Re: second test

Larry Clement W2LAC
 

And a very Happy New Year to you as well, and many, many more.
Larry Clement, Freeport, NY.



-----Original Message-----
From: Dale Putnam daleputnam@... [4sqrp] <4sqrp@...>
To: 4sqrp <4sqrp@...>
Sent: Fri, Dec 26, 2014 10:17 am
Subject: RE: [4sqrp] second test

 
5nn here...  

Happy New Year, may it be Better for us all!!

Have a great day,
 
 
--... ...-- Dale - WC7S in Wy
 
 



To: 4sqrp@...
From: 4sqrp@...
Date: Fri, 26 Dec 2014 09:12:42 -0600
Subject: [4sqrp] second test

 
test of email AGAIN!


Re: second test

Dale Putnam
 

5nn here...  

Happy New Year, may it be Better for us all!!

Have a great day,
 
 
--... ...-- Dale - WC7S in Wy
 
 



To: 4sqrp@...
From: 4sqrp@...
Date: Fri, 26 Dec 2014 09:12:42 -0600
Subject: [4sqrp] second test

 
test of email AGAIN!


second test

Paul Smith
 

test of email AGAIN!


Hello everyone test test test

Paul Smith
 

Richard is working on my Mac Pro

de Paul N0NBD


Re: Merry Christmas

 

My new soldering stations--Weller WESD51--showed up yesterday so now I
need to get back to working on my Magic Box and then the Ozark Patrol.

Merry Christmas, all!

72, Nate

--

"The optimist proclaims that we live in the best of all
possible worlds. The pessimist fears this is true."

Ham radio, Linux, bikes, and more: http://www.n0nb.us


Re: Merry Christmas

W0IIT
 

From the Lawson household to all, a very Merry Christmas and a happy and prosperous New Year!!

Hope Santa was kind to you this morning and everyone is busy playing with their new toys:-)

From Bart W0IIT Patsy KC5CDE


Merry Christmas and MTR

Mike. Crownover <ad5a@...>
 

Dale,

Merry Christmas and HNY.

Any progress on the MTR? Just curious.

73,

Mike AD5A