Date   

Re: MP/PM

AA4GA <aa4ga@...>
 

I thought "MP" was "Military Police" - or is that obsolete?

73 de Lee
--
Lee Hiers, AA4GA

Submit your QRP DXCC totals to www.qrpdx.com!


On Tue, May 26, 2015 at 4:02 PM, Michael McEwen mcewenk5osa@... [4sqrp] <4sqrp@...> wrote:
 

Sorry for reverting to old habits...MP used to mean "man portable" not PC now...I will try to remember PM...
_ _ ...   .. _ _ _

Doc K5OSA - QTH: EM04sr
ARRL  
4SQRP #801 - NAQCC #7625 - SKCC #10098
FISTS #17157 - OMISS #9886
LFSARC (Lawton/Fort Sill Amateur Radio Club)

Michael T McEwen
Lt Col, US Army, Ret

Cellular Phone:  580 919-9205
Residence:  580 529-3412



MP/PM

Michael McEwen
 

Sorry for reverting to old habits...MP used to mean "man portable" not PC now...I will try to remember PM...
_ _ ...   .. _ _ _

Doc K5OSA - QTH: EM04sr
ARRL  
4SQRP #801 - NAQCC #7625 - SKCC #10098
FISTS #17157 - OMISS #9886
LFSARC (Lawton/Fort Sill Amateur Radio Club)

Michael T McEwen
Lt Col, US Army, Ret

Cellular Phone:  580 919-9205
Residence:  580 529-3412


Punk, Part 2

Michael McEwen
 

Great discussion folks.  My issue may have been misunderstood...my bad.  I just wanted the simplest antenna for 40M CW for my homebrew rig tht I use to entice (I hope) people, especially kids, in to considering our avocation.  I do have a multiband/mode TXCVR and Par Endfedz and AlexLoop antennas for my "hard core" MP/portable ops.

I was hoping that my "no cabinet" open rig, simple "quick up" antenna and straight key might attract some people who assume our hobby is only for rich folks who spend many thousand $ for the super rigs/amps/antennas.  I have been donating copies of QST to Army libraries and public schools for years...by far the greatest interest has not been them but rather "radio in the park" with simple gear. 

My punk antenna to start is going to be a 40M hamstick mounted on a large pizza pan with 4 wire coat hanger radials attached by bolts/wing nuts.  I will appreciate any more discussion on the issue, but want to give this a test and post results.
_ _ ...   .. _ _ _

Doc K5OSA - QTH: EM04sr
ARRL  
4SQRP #801 - NAQCC #7625 - SKCC #10098
FISTS #17157 - OMISS #9886
LFSARC (Lawton/Fort Sill Amateur Radio Club)

Michael T McEwen
Lt Col, US Army, Ret

Cellular Phone:  580 919-9205
Residence:  580 529-3412


Re: Punk antenna

Michael McEwen
 

Martin, I sold my 817 for three reasons:  weight incl external batt, complicated menues, and small display...it was a great radio in the shack, but not what I was looking for "in the field".  KX-3 looks great but is way $ for my "play radio" budget...that's why I kept looking and found the LNR LD-5...Everyone has favorites but it just depends on what you want/need.

_ _ ...   .. _ _ _

Doc K5OSA - QTH: EM04sr
ARRL  
4SQRP #801 - NAQCC #7625 - SKCC #10098
FISTS #17157 - OMISS #9886
LFSARC (Lawton/Fort Sill Amateur Radio Club)

Michael T McEwen
Lt Col, US Army, Ret

Cellular Phone:  580 919-9205
Residence:  580 529-3412


On Tue, May 26, 2015 at 1:10 PM, 'Martin Huyett' huyettmeh@... [4sqrp] <4sqrp@...> wrote:
 

Dave (W7AQK) and Michael,

 

I’d be interested in any info you care to share about end fed half wave antennas you’ve had experience with, Dave, including the tuner and deployment of the actual antenna, counterpoise, etc. Like Michael I’m playing with the idea of taking a QRP setup with me on a hike in Glacier National Park and have been trying different antennas in my back yard. I describe in some detail what I’ve tried and my experiences so far on my web pages starting at http://www.huyettm.net/portable-antennas.html. The two rigs I am contemplating are my Yaesu FT817nd and a TenTec R4020. I love the full range of the 817 but wish it didn’t weigh 3 pounds! And in the end I may not take anything, given it is a six day wilderness trip and weight will be a premium. But it is fun to play with the stuff anyway.

 

Have fun, Michael!

 

Martin

K0BXB

 

From: 4sqrp@... [mailto:4sqrp@...]
Sent: Tuesday, May 26, 2015 7:27 AM
To: 4sqrp@...
Subject: [4sqrp] Re: Punk antenna

 

 

Hi Michael,

You will probably get some pretty good antenna suggestions here, but I want to caution you in case this might be your first attempt at QRP.  Since 40 meters is the band you will be using, the antenna you select needs to be as good as you can possibly make it.  So, if there is any way you could go with a dipole, and maybe even just one of those collapsible poles for a support, you may find that works a lot better.  I've operated QRP on 40 a bunch, and often with just something much simpler, like an MP-1 or similar, but 40 is a tough band for using small portable antenna systems like that.  You really need to pay attention to putting out a good ground radial system.  If you do, you can have some very good results with smaller systems like that.  An End Fed Half Wave, or even one of the Mag Loops might be a good option too, but both have some disadvantages.  Even a random wire and a counterpoise can work well, but you probably would need some kind of tuner.  There are some very good small tuners--like a Z match--that will do a good job and not take up much space in your pack. 

Check out what some of the SOTA folks are using for antennas.  They usually have it down to a science as far as keeping things as simple as possible while still being effective. 

Good luck and hope you have lots of fun with that rig.  QRP is a hoot once you get into it.

Dave W7AQK



Re: Punk antenna

Martin Huyett <huyettmeh@...>
 

Dave (W7AQK) and Michael,

 

I’d be interested in any info you care to share about end fed half wave antennas you’ve had experience with, Dave, including the tuner and deployment of the actual antenna, counterpoise, etc. Like Michael I’m playing with the idea of taking a QRP setup with me on a hike in Glacier National Park and have been trying different antennas in my back yard. I describe in some detail what I’ve tried and my experiences so far on my web pages starting at http://www.huyettm.net/portable-antennas.html. The two rigs I am contemplating are my Yaesu FT817nd and a TenTec R4020. I love the full range of the 817 but wish it didn’t weigh 3 pounds! And in the end I may not take anything, given it is a six day wilderness trip and weight will be a premium. But it is fun to play with the stuff anyway.

 

Have fun, Michael!

 

Martin

K0BXB

 

From: 4sqrp@... [mailto:4sqrp@...]
Sent: Tuesday, May 26, 2015 7:27 AM
To: 4sqrp@...
Subject: [4sqrp] Re: Punk antenna

 

 

Hi Michael,

You will probably get some pretty good antenna suggestions here, but I want to caution you in case this might be your first attempt at QRP.  Since 40 meters is the band you will be using, the antenna you select needs to be as good as you can possibly make it.  So, if there is any way you could go with a dipole, and maybe even just one of those collapsible poles for a support, you may find that works a lot better.  I've operated QRP on 40 a bunch, and often with just something much simpler, like an MP-1 or similar, but 40 is a tough band for using small portable antenna systems like that.  You really need to pay attention to putting out a good ground radial system.  If you do, you can have some very good results with smaller systems like that.  An End Fed Half Wave, or even one of the Mag Loops might be a good option too, but both have some disadvantages.  Even a random wire and a counterpoise can work well, but you probably would need some kind of tuner.  There are some very good small tuners--like a Z match--that will do a good job and not take up much space in your pack. 

Check out what some of the SOTA folks are using for antennas.  They usually have it down to a science as far as keeping things as simple as possible while still being effective. 

Good luck and hope you have lots of fun with that rig.  QRP is a hoot once you get into it.

Dave W7AQK


Re: Punk antenna

Michael McEwen
 

Very simple and elegant design...TNX...
_ _ ...   .. _ _ _

Doc K5OSA - QTH: EM04sr
ARRL  
4SQRP #801 - NAQCC #7625 - SKCC #10098
FISTS #17157 - OMISS #9886
LFSARC (Lawton/Fort Sill Amateur Radio Club)

Michael T McEwen
Lt Col, US Army, Ret

Cellular Phone:  580 919-9205
Residence:  580 529-3412


On Tue, May 26, 2015 at 8:31 AM, LARRY MAKOSKI w2lj@... [4sqrp] <4sqrp@...> wrote:
 

PAC-12 antenna works reasonably well. Small vertical, which can either be commercially purchased or homebrewed. I used the homebrewed version for years.
 
Here's a link to the homebrew instructions: http://www.njqrp.org/pac-12/
 
73 de Larry W2LJ
QRP - When you care to send the very least!



Re: anti-static mat

Wayne Dillon
 

Sam,
No harm at all, We use Desco matting at work and I'm constantly "trimming them to size when we replace them. Try and organize it so that you keep the press-stud on the piece you want to use.
Blessings
Wayne - KC0PMH

--
http://www.qsl.net/kc0pmh/   Under construction but please visit anyway.
 
QRP -  EFFICIENCY AND SKILL, NOT POWER. 
 
I'm British by birth but American by CHOICE!

Jesus came to pay a debt He didn't owe because we owe a debt we cannot pay...

The Lord bless you and keep you
The Lord make His face shine upon you, and be gracious unto you
The Lord lift up his contenance upon you and give you peace.

God Bless from Wayne Dillon - KC0PMH

Joshua 24:14-15
2 Cor 5:17
1 Jn 2:17
 
Membership Chairman - 4SQRP Group
4SQRP #95
FISTS 17184
FPQRP #342 (Flying Pigs QRP Club)
NAQCC # 0759
QRP-ARCI #11505
SKCC #1155T
CW Ragchewers Anonymous #40
SOC #848
30MDG#1176
NEQRP #693
GORC #192
DMC (Digital Modes Club) # 06686


Re: Punk antenna

LARRY MAKOSKI <w2lj@...>
 

PAC-12 antenna works reasonably well. Small vertical, which can either be commercially purchased or homebrewed. I used the homebrewed version for years.
 
Here's a link to the homebrew instructions: http://www.njqrp.org/pac-12/
 
73 de Larry W2LJ
QRP - When you care to send the very least!


Re: Punk antenna

Donald Sanders
 

Michael, Some good suggestions from others. 
QRPMEkits has a nice small ant tuner as a kit if you decide to use one.
I have used both a full sized dipole as inverted Vee- requires at least 40 foot each side of the center support -but is most efficient and a reduced length of 50 feet and loading coils at 50 to 60 percent of distance toward the end from the center. Both are efficient. 
Short run of RG 174(30 feet) or longer run of RG58C(40 to 50 feet) will do well for feed line.  Look on internet for program "LODIPOLE" . It will help design the loaded dipole and the coils needed.
100 feet of nylon rope can be used to pull it up into a tree.
For a center mast, a jacpole or at least a 7 meter telescoping pole will do. SOTA in England has a nice telescoping pole. 
Also 4 or 5 telescoping sections of PVC pipe can make a center mast. Length of each section as needed for easy transport. I have my mast in 10 feet(3 meter) lengths of 1 inch and 1/2 inch PVC and it works well for a 20 foot mast. Overlap 6 inches and I use adj clamp for portable setup with 3 inch slits in the end of the 1 inch PVC. Tie it to what ever support is available
I also use two as home base masts for ends of a 44 foot inv vee fed with 300 ohm line. The center is a 10 meter bamboo pole.

Dr. Don HC4/W4BWS

On Mon, May 25, 2015 at 7:17 PM, Michael McEwen mcewenk5osa@... [4sqrp] <4sqrp@...> wrote:
 

I have recently been given a neat 2 1/2 W crystal controlled transmitter (7.030 and 7.040 crystals).

My plan is to put together an ultraminimalist station.  Believe it or not, I have a Sony SW 7600 portable which receives CW really nicely. I have a tiny Whiterook Products MK-32 sideswiper key. And a 12V for the TX power. 

What I want is the simplest TX antenna that would work for this.  I could use my 40M dipole here at home, but I really want some smaller than that for taking the station to the park, picnics, etc.

The best idea I can up with is a hamstick, but I afraid that the efficiency will be so low as to simulate a dummy load.  Is there some kind of vertical other than a standard 1/4 wave I could use?  A full 1/4 wave vertical is a no-go.

I'd rather not use a tuner although I have a good one...I really would like this to be as simple as possible, just for grins...
_ _ ...   .. _ _ _

Doc K5OSA - QTH: EM04sr
ARRL  
4SQRP #801 - NAQCC #7625 - SKCC #10098
FISTS #17157 - OMISS #9886
LFSARC (Lawton/Fort Sill Amateur Radio Club)

Michael T McEwen
Lt Col, US Army, Ret

Cellular Phone:  580 919-9205
Residence:  580 529-3412



Re: anti-static mat

Tim N9PUZ
 

With the mats I'm familiar with the only downside to cutting it is the piece you remove may not have a snap to attach the ground connection. That's a minor detail and you may not even care about the extra piece.

Tim N9PUZ

On 5/26/2015 8:09 AM, Sam Binkley zut1369@yahoo.com [4sqrp] wrote:
Greetings,

I recently purchased a Desco anti-static mat in anticipation of doing
some work inside my K3. It appears to be of excellent quality and is on
the list suggested by Elecraft for ESD protection. My question for the
group: would there be any harm in cutting the mat? It is about twice
as large as my available work space and I would like to cut it in half.
Thanks in advance for suggestions.

Sam, AL7V
Juneau, AK
4SQRP #472


Re: Punk antenna

Tim N9PUZ
 

With goals of ultra simple, works well, and no tuner I would second the NorCal Doublet style antenna. This would assume you can find a handy tree, etc. as a support and do not have to carry a mast.

With a tuner, even a simple one, I'd go with an end fed wire and a short counterpoise. Search on the End Fed Have Wave for plenty of ideas. This would actually be my first choice even adding in a small tuner of some type although it is slightly more complicated.

Tim N9PUZ

On 5/25/2015 7:17 PM, Michael McEwen mcewenk5osa@gmail.com [4sqrp] wrote:

What I want is the simplest TX antenna that would work for this. I
could use my 40M dipole here at home, but I really want some smaller
than that for taking the station to the park, picnics, etc.


anti-static mat

Sam Binkley <zut1369@...>
 

Greetings,

I recently purchased a Desco anti-static mat in anticipation of doing some work inside my K3. It appears to be of excellent quality and is on the list suggested by Elecraft for ESD protection. My question for the group:  would there be any harm in cutting the mat?  It is about twice as large as my available work space and I would like to cut it in half.  Thanks in advance for suggestions.

Sam, AL7V
Juneau, AK
4SQRP #472


Re: Punk antenna

w7aqk@...
 

Hi Michael,

You will probably get some pretty good antenna suggestions here, but I want to caution you in case this might be your first attempt at QRP.  Since 40 meters is the band you will be using, the antenna you select needs to be as good as you can possibly make it.  So, if there is any way you could go with a dipole, and maybe even just one of those collapsible poles for a support, you may find that works a lot better.  I've operated QRP on 40 a bunch, and often with just something much simpler, like an MP-1 or similar, but 40 is a tough band for using small portable antenna systems like that.  You really need to pay attention to putting out a good ground radial system.  If you do, you can have some very good results with smaller systems like that.  An End Fed Half Wave, or even one of the Mag Loops might be a good option too, but both have some disadvantages.  Even a random wire and a counterpoise can work well, but you probably would need some kind of tuner.  There are some very good small tuners--like a Z match--that will do a good job and not take up much space in your pack. 

Check out what some of the SOTA folks are using for antennas.  They usually have it down to a science as far as keeping things as simple as possible while still being effective. 

Good luck and hope you have lots of fun with that rig.  QRP is a hoot once you get into it.

Dave W7AQK


Re: Punk antenna

J.K. Wright
 

Search Yo Yo Tenna Deluxe-  retractable dipole.

On May 25, 2015 9:46 PM, "wmorrill@... [4sqrp]" <4sqrp@...> wrote:
 

Is there any way that you can convert it to 20 meters? Propagation during
the daytime is usually better on 20 than 40. A 20 meter dipole is
manageable for portable use.
My 2 cents....
Wendell
N7WM

> About anything other than a tuned dipole is going to need a tuner. Short
> antennas have too much loss. The other option would be something like a
> Norcal doublet (22’ length for each leg, center fed with ladder line or
> window line). A long wire would be the next choice. My 2¢ anyway. It
> all depends on what supports (trees) you have available.
>
> 72,
>
> Chas - NK8O
> 4SQRP 843, SKCC 8952T, NAQCC #5873
>
>
>> On May 25, 2015, at 19:17, Michael McEwen mcewenk5osa@... [4sqrp]
>> <4sqrp@...> wrote:
>>
>>
>> I have recently been given a neat 2 1/2 W crystal controlled transmitter
>> (7.030 and 7.040 crystals).
>>
>> My plan is to put together an ultraminimalist station. Believe it or
>> not, I have a Sony SW 7600 portable which receives CW really nicely. I
>> have a tiny Whiterook Products MK-32 sideswiper key. And a 12V for the
>> TX power.
>>
>> What I want is the simplest TX antenna that would work for this. I
>> could use my 40M dipole here at home, but I really want some smaller
>> than that for taking the station to the park, picnics, etc.
>>
>> The best idea I can up with is a hamstick, but I afraid that the
>> efficiency will be so low as to simulate a dummy load. Is there some
>> kind of vertical other than a standard 1/4 wave I could use? A full 1/4
>> wave vertical is a no-go.
>>
>> I'd rather not use a tuner although I have a good one...I really would
>> like this to be as simple as possible, just for grins...
>> _ _ ... .. _ _ _
>>
>> Doc K5OSA - QTH: EM04sr
>> ARRL
>> 4SQRP #801 - NAQCC #7625 - SKCC #10098
>> FISTS #17157 - OMISS #9886
>> LFSARC (Lawton/Fort Sill Amateur Radio Club)
>>
>> Michael T McEwen
>> Lt Col, US Army, Ret
>>
>> Cellular Phone: 580 919-9205
>> Residence: 580 529-3412
>>
>>
>>
>
>


Re: Punk antenna

Wendell Morrill
 

Is there any way that you can convert it to 20 meters? Propagation during
the daytime is usually better on 20 than 40. A 20 meter dipole is
manageable for portable use.
My 2 cents....
Wendell
N7WM

About anything other than a tuned dipole is going to need a tuner. Short
antennas have too much loss. The other option would be something like a
Norcal doublet (22’ length for each leg, center fed with ladder line or
window line). A long wire would be the next choice. My 2¢ anyway. It
all depends on what supports (trees) you have available.

72,

Chas - NK8O
4SQRP 843, SKCC 8952T, NAQCC #5873


On May 25, 2015, at 19:17, Michael McEwen mcewenk5osa@gmail.com [4sqrp]
<4sqrp@yahoogroups.com> wrote:


I have recently been given a neat 2 1/2 W crystal controlled transmitter
(7.030 and 7.040 crystals).

My plan is to put together an ultraminimalist station. Believe it or
not, I have a Sony SW 7600 portable which receives CW really nicely. I
have a tiny Whiterook Products MK-32 sideswiper key. And a 12V for the
TX power.

What I want is the simplest TX antenna that would work for this. I
could use my 40M dipole here at home, but I really want some smaller
than that for taking the station to the park, picnics, etc.

The best idea I can up with is a hamstick, but I afraid that the
efficiency will be so low as to simulate a dummy load. Is there some
kind of vertical other than a standard 1/4 wave I could use? A full 1/4
wave vertical is a no-go.

I'd rather not use a tuner although I have a good one...I really would
like this to be as simple as possible, just for grins...
_ _ ... .. _ _ _

Doc K5OSA - QTH: EM04sr
ARRL
4SQRP #801 - NAQCC #7625 - SKCC #10098
FISTS #17157 - OMISS #9886
LFSARC (Lawton/Fort Sill Amateur Radio Club)

Michael T McEwen
Lt Col, US Army, Ret

Cellular Phone: 580 919-9205
Residence: 580 529-3412



Re: Punk antenna

Charles W. Powell
 

About anything other than a tuned dipole is going to need a tuner.  Short antennas have too much loss. The other option would be something like a Norcal doublet (22’ length for each leg, center fed with ladder line or window line).  A long wire would be the next choice.  My 2¢ anyway.  It all depends on what supports (trees) you have available.

72,

Chas - NK8O
4SQRP 843, SKCC 8952T, NAQCC #5873


On May 25, 2015, at 19:17, Michael McEwen mcewenk5osa@... [4sqrp] <4sqrp@...> wrote:

 

I have recently been given a neat 2 1/2 W crystal controlled transmitter (7.030 and 7.040 crystals).

My plan is to put together an ultraminimalist station.  Believe it or not, I have a Sony SW 7600 portable which receives CW really nicely. I have a tiny Whiterook Products MK-32 sideswiper key. And a 12V for the TX power. 

What I want is the simplest TX antenna that would work for this.  I could use my 40M dipole here at home, but I really want some smaller than that for taking the station to the park, picnics, etc.

The best idea I can up with is a hamstick, but I afraid that the efficiency will be so low as to simulate a dummy load.  Is there some kind of vertical other than a standard 1/4 wave I could use?  A full 1/4 wave vertical is a no-go.

I'd rather not use a tuner although I have a good one...I really would like this to be as simple as possible, just for grins...
_ _ ...   .. _ _ _

Doc K5OSA - QTH: EM04sr
ARRL  
4SQRP #801 - NAQCC #7625 - SKCC #10098
FISTS #17157 - OMISS #9886
LFSARC (Lawton/Fort Sill Amateur Radio Club)

Michael T McEwen
Lt Col, US Army, Ret

Cellular Phone:  580 919-9205
Residence:  580 529-3412




Re: Punk antenna

Bill Cromwell
 

Hi,

How about a mag-loop?

73,

Bill KU8H


Sent from my Galaxy S®III


-------- Original message --------
From: "Michael McEwen mcewenk5osa@... [4sqrp]" <4sqrp@...>
Date:05/25/2015 20:17 (GMT-05:00)
To: QRP-L Mailing List ,4sqrp@...
Subject: [4sqrp] Punk antenna

 

I have recently been given a neat 2 1/2 W crystal controlled transmitter (7.030 and 7.040 crystals).

My plan is to put together an ultraminimalist station.  Believe it or not, I have a Sony SW 7600 portable which receives CW really nicely. I have a tiny Whiterook Products MK-32 sideswiper key. And a 12V for the TX power. 

What I want is the simplest TX antenna that would work for this.  I could use my 40M dipole here at home, but I really want some smaller than that for taking the station to the park, picnics, etc.

The best idea I can up with is a hamstick, but I afraid that the efficiency will be so low as to simulate a dummy load.  Is there some kind of vertical other than a standard 1/4 wave I could use?  A full 1/4 wave vertical is a no-go.

I'd rather not use a tuner although I have a good one...I really would like this to be as simple as possible, just for grins...
_ _ ...   .. _ _ _

Doc K5OSA - QTH: EM04sr
ARRL  
4SQRP #801 - NAQCC #7625 - SKCC #10098
FISTS #17157 - OMISS #9886
LFSARC (Lawton/Fort Sill Amateur Radio Club)

Michael T McEwen
Lt Col, US Army, Ret

Cellular Phone:  580 919-9205
Residence:  580 529-3412


Punk antenna

Michael McEwen
 

I have recently been given a neat 2 1/2 W crystal controlled transmitter (7.030 and 7.040 crystals).

My plan is to put together an ultraminimalist station.  Believe it or not, I have a Sony SW 7600 portable which receives CW really nicely. I have a tiny Whiterook Products MK-32 sideswiper key. And a 12V for the TX power. 

What I want is the simplest TX antenna that would work for this.  I could use my 40M dipole here at home, but I really want some smaller than that for taking the station to the park, picnics, etc.

The best idea I can up with is a hamstick, but I afraid that the efficiency will be so low as to simulate a dummy load.  Is there some kind of vertical other than a standard 1/4 wave I could use?  A full 1/4 wave vertical is a no-go.

I'd rather not use a tuner although I have a good one...I really would like this to be as simple as possible, just for grins...
_ _ ...   .. _ _ _

Doc K5OSA - QTH: EM04sr
ARRL  
4SQRP #801 - NAQCC #7625 - SKCC #10098
FISTS #17157 - OMISS #9886
LFSARC (Lawton/Fort Sill Amateur Radio Club)

Michael T McEwen
Lt Col, US Army, Ret

Cellular Phone:  580 919-9205
Residence:  580 529-3412


MemCert

WA0ITP
 

Only 6 days left to submit your Membership Certificate entry.

After a flurry of activity, the entries have gone silent. Attached is another design to review and hopefully spark some interest, it's pretty plain and isn't intended as an entry. It may come up in portrait mode, but is intended as a landscape.

I did this one in Publisher, but many other Graphjics programs will work ok to, or there are online sites and free downloads available too.
Google "certificate maker" for lots of hits.

Entries are still needed, so pse jump on the bandwagon and send them to me on, or before, 1 June. Thank you.

-- 72 WAØITP I love this radio stuff. www.wa0itp.com wa0itp@wa0itp.com


NAQCC MWN

Scotty Long
 

Quick note NAQCC Midwest MWN Net 40m 7117 kHz Memorial Day evening at 9pm CDT 0200 UTC. Please listen up or down as the frequency may be busy at net time. Thank you veterans!!!! 

Sent from my iPad

73 Scotty Long NU0S
NAQCC MWN NCS
Net Manager-Coordinator 
Member 3715

Follow me on Twitter for live net updates and QRP in the field... @NU0Slong 

16141 - 16160 of 25048