Ge Dan: Well here in Ks I fired up the tractor and pushed that pretty white stuff (I could think of a better name?) around for about 2 hours! This winter is getting old! I am ready for some spring

I just finished my 20M Wilderness SST this weekend. Only took me a couple years to get the time to get it all done. I wanted to get it done in time for Ozarkcon. Now I just need to get an antenna

Well, we finally got it. Seems like we've escaped all the bad winter weather. I don't know how you really measure snow but a ruler my wife stuck into the snow on our deck is rapidly disappearing! They

Do you need to take your shoes off to count that high? (evil grin). 73, Bill KU8H

No snow or ice in central Arkansas, but it was kinda cold and windy. I'm still working on that Argonaut 505 a bit. And trying to fix my daughter's iPod Nano. (Gonna need a stronger jeweler's

On Sun, 2013-03-24 at 19:00 -0500, n0jrn wrote: --snip--- > > > I've got all the metal for the encloure waiting. Will someone send > me on of those ROUND TO IT's LOL > > 73 and happy building to

oh.. I know.... you shoulda seen me hunting around for a mic to test it with.. I finally had to build one. Have a great day, --... ...--Dale - WC7S in Wy To: 4sqrp@...;

Now Dale, you can't use words like SS* on the reflector, the moderator will get ya! 72 Johnny AC0BQ

When you fold the wire in half and slip it through both holes, that is one turn. Loop both ends through the opposite holes and you have two turns... etc. Every time the wire passes through

I just finished a Survivor (75m ssb, no foolin ssb). And am repairing a K1. It is 14F with no wind (yet) and 2 inches of fluffy dry stuff. Have a great day, --... ...--Dale - WC7S in Wy

Working on my PigRig. How can you count turns using #34 wire in a 1/4 inch long binocular core transformer?? And here I bitched about the 1/8 watt resistors... 73 de Lee KM4YY

An electronic keyer specifically for my Swan 700cx. Using the Island Keyer II, a small audio amp from Kitsandparts and HamGadgits keying adaptor. Front panel pots for On/Off and volume, weight,

When those 7122 crystals start getting out to us, installed and operating: Are there any other component changes necessary to the frequency change? Thanks, Bob - K6KL

You know and the rest of the 4 State gang are probably wishing they did too. Just my way of tweaking interest in the latest goodie from the K8IQY lab. :-) Terry, maybe you could post that picture

Hey Terry and the group. Lots of now here, abt 6 inches with drifts! I am working on a DIZ freqency counter kit. Was going well till I had to stop and push snow! 72 CU at OZARKCON!! Johnny AC0BQ

Looks like it has been a good dat to build all over the 4 state area. About 2" here on the ground, none in the streets. Working on installing an HPM in an Altoids along with a switch, battery,

Haven't even tried to dig out here in Iola yet. And my ground-mounted 5BTV won't tune up, so I suspect the snow is covering enough that it's shorting at the feedpoint - oh the troubles of a

Hey guys, I am dug out here in Humboldt. I went to the campus with my crew moving snow. There was 6 inches on the flat and some 4 foot drifts. We got most of it cleared and called it a day... I'm

Same here Johnny.........6 to 10 inches and "they" say more coming....We need the moisture! Uncle Phil.........see ya at the OZCON!

Thought I would forward this little adventure from Saturdays Polar Bear Moonlight Madness Event. have a great week everyone... 72/73/Scotty/NUØS