Well it was 45 F here in South Florida this morning in Port St Lucie according to West Palm Fl TV, WPTV. Yes, it gets cold here also. Fortunately no snow or ice. Dr. Don W4BWS

T's a 48 - 40 day.. wow 48F and 40 mph breezes.. and .. it seems to have blown the sun away.. well.. of course not.. however.. we ARE changing our AIR supply for fresher cleaner air... MAKE is a

Managed to work KV6Z with QSB, and heard N0NBD but only a few other faint signals. Propagation wasn't nearly as good as the night or two before, and I turned in before the last 30 minutes. Yep, we

If you haven't done so already, please send in your score, certainly by tomorrow night. I'll be reporting the results Wednesday morning. If you wish to report a score of "0", just to show you were

Email: k4leo.e@... Anan 200D: $2600, ANAN-100D SDR: $1,250 Yaesu FTDX 5000MP: $2,600, Yaesu FTDX-3000: $1,500 Flex 5000A: $1,600, Flex 6500: $2,500, Flex 6300:$1,800 Icom PW1: $2,200 , Icom 7600:

I checked down to 7121 several times. I will remember to slow down for Jumpers tuning de Paul N0NBD Sent from Outlook

Hello John, I was disappointed, I thought I would work a BUNCH of Jumpers but no soap. I will haunt 7122 this week to try to work a few. Gear here was KX2 and Doublet 5 watts. de Paul N0NBD Sent

Here's the low pass filter I am looking to build. It's built in an Altoids can so it must be official QRP equipment ! http://www.qsl.net/kp4md/lpfilter.htm Dennis KC0IFQ

Paul: I almost heard you here in Kirkwood, MO. At least I heard "N0N__" and figured it was you. But you were in the mud and then you disappeared. Then I got on the phone with my kids

Well, I hung out for about 45 minutes calling CQ on 7.121.025ish...freq seems to vary by a few hertz but the Reverse Beacons spotted me at 7.121.100... Anyway, I did have a couple of answers but

Ge Guys The BJ SSS was fun!! I know that isn't exactly what it was!! I had a plan to use my KX-3 and work a pile of you guys, well I don't think 4 would make a pile!! I heard a lot more than I got

Thanks to AC0BQ and KV6Z for dropping (I was a fair piece out of his PB) down to my rock freq I've managed two on the Bayou Jumper....still swinging. Randy_KB4QQJ 00?....maybe (Names hidden to

N0NBD Hi my call is N5MZX. I heard your signal in Columbia, Tn. you were a 459. I enjoy QRP but my code speed suck after health problems. I am a member of qrparci no. 5770 and flying pigs no 1192 73

I stuck it out for an hour and made one contact. I heard a few other signals but not strong enough to work. Ill be hanging in the 7122 area for Jumpers tomorrow. de Paul N0NBD Sent from Outlook

Thanks to the input of everyone, I have my BJ regen tweaked in. The range is approximately 7.000 MHx to 7.138 MHz. Initially the midway point on the dial was about 7.400 MHz and compressing the 19

Okay, I did not see kits on the site, I built a 1340 in 97, mine was pretty hot, I got 5.8 watts out. Keith Sent from Yahoo Mail for iPad

LOWER PRICE BEFORE IT GOES TO THE OTHER SITES OR eBay... FOR SALE: Elecraft KX-1 Tri-Band W/Tuner It may be freezing cold out today but shortly you'll be wanting to head out to the deck, the local

ten tec still selling the 1380. have the 1340 i bulit in the 70 S great little rig 3 watts out

Hi Chuck, I still have some vernier reduction drives left if that would help. See www.midnightscience.com Phil member 4SQRP member W0UK Club This email has been

Consider the MKARS80. There is an optional CW adapter too. http://www.radio-kits.co.uk/mkars80page.html