|
RMR rpt
Had not real great condx today, with 5 checkins: but good conversation with three.
K2HT - Dick in Mo.. was very very light to me, but K0DTJ , Brian in Ca, helped out and
we got Dick recognized. W5GW -
Had not real great condx today, with 5 checkins: but good conversation with three.
K2HT - Dick in Mo.. was very very light to me, but K0DTJ , Brian in Ca, helped out and
we got Dick recognized. W5GW -
|
By
Dale Putnam
·
#1861
·
|
|
Re: Parts source sought
Hi Dave,
Here's a long shot that might be fun. I read some time ago about a guy in Montana that gathered up the raw material and then molded his own large rods. Don't recall the url but you might try
Hi Dave,
Here's a long shot that might be fun. I read some time ago about a guy in Montana that gathered up the raw material and then molded his own large rods. Don't recall the url but you might try
|
By
Phil Anderson
·
#1859
·
|
|
RMR on 14.0624 at 2045z
From under snow drifts and beneath a bright clear sky, will come the cry:
CQ RMR CQ RMR de WC7S QNI PSE K
and your answer is welcome... at any speed you want. I'll match you, we'll exchange
From under snow drifts and beneath a bright clear sky, will come the cry:
CQ RMR CQ RMR de WC7S QNI PSE K
and your answer is welcome... at any speed you want. I'll match you, we'll exchange
|
By
Dale Putnam
·
#1860
·
|
|
Re: Parts source sought
I'd check with Rex at QRPme to see if his China connection can get something like that. Other than that, probably eBay from one of the sellers. Maybe negotiate a lower price with 100 unit
I'd check with Rex at QRPme to see if his China connection can get something like that. Other than that, probably eBay from one of the sellers. Maybe negotiate a lower price with 100 unit
|
By
Jim Kortge
·
#1858
·
|
|
Re: Parts source sought
correction AA1IP Brad <http://radioexchange.tripod.com/id12.html>
--
enjoy the day
correction AA1IP Brad <http://radioexchange.tripod.com/id12.html>
--
enjoy the day
|
By
Robert 'RC' Conley <rc.kc5wa@...>
·
#1857
·
|
|
Re: Parts source sought
try AI5P<http://radioexchange.tripod.com/id12.html>
--
enjoy the day
try AI5P<http://radioexchange.tripod.com/id12.html>
--
enjoy the day
|
By
Robert 'RC' Conley <rc.kc5wa@...>
·
#1856
·
|
|
Parts source sought
Hello 4SQRPers!
I could use a bit of assistance tracking down a source for ferrite rods or loopstick antennas. I'd like to be able to obtain at least 100. Amidon has rods, but are pretty expensive.
Hello 4SQRPers!
I could use a bit of assistance tracking down a source for ferrite rods or loopstick antennas. I'd like to be able to obtain at least 100. Amidon has rods, but are pretty expensive.
|
By
nm0s_qrp <ai9e_qrp@...>
·
#1855
·
|
|
Re: LT SPICE circuit draw and simulate program DOWNLOAD
Yes, LTSpice is one of the very best free technical programs out there. True, there's a learning curve if you want to get into complex stuff, imported models, etc., but you can start
Yes, LTSpice is one of the very best free technical programs out there. True, there's a learning curve if you want to get into complex stuff, imported models, etc., but you can start
|
By
Nick-WA5BDU
·
#1854
·
|
|
40m net last evening
Good morning all,
The early net ran and we fought QRM/N all the way so a huge thank you to all who showed and all who tried. I know there were a couple of signals in there but I just couldn't pull you
Good morning all,
The early net ran and we fought QRM/N all the way so a huge thank you to all who showed and all who tried. I know there were a couple of signals in there but I just couldn't pull you
|
By
Wayne Dillon
·
#1853
·
|
|
Wed. night PSK n checkins.
Wed. night PSK checkins:
KA0KRN David, Ottumwa, IA
KC0IFQ Dennis, Augusta, KS
AC0WZ Dan, Fulton, MO
K6QKL Chuck, Fairview Hts. IL
Tnx fer checkins those who tried and
didn't make, QRN here and
Wed. night PSK checkins:
KA0KRN David, Ottumwa, IA
KC0IFQ Dennis, Augusta, KS
AC0WZ Dan, Fulton, MO
K6QKL Chuck, Fairview Hts. IL
Tnx fer checkins those who tried and
didn't make, QRN here and
|
By
Virgil R. Hammond <n0tgr@...>
·
#1852
·
|
|
Re: 80 CW Checkns revisited
Thanks Terry, I like that new key. Liked the other key too but the Brass Racer is kind of nice.
I didn't hear anything on 40. I was a little late to the show, tho...
Time to batten down the hatches,
Thanks Terry, I like that new key. Liked the other key too but the Brass Racer is kind of nice.
I didn't hear anything on 40. I was a little late to the show, tho...
Time to batten down the hatches,
|
By
Dan Reynolds
·
#1851
·
|
|
Re: 80 CW Checkns revisited
80m was noisy tonight, no copy up here in MT.
72
Wendell N7WM
80m was noisy tonight, no copy up here in MT.
72
Wendell N7WM
|
By
Wendell Morrill
·
#1850
·
|
|
Re: 80 CW Checkns revisited
> Lets try that report again and see if it looks better this time
>
>
> 1:02 N9RLO John UPLAND, IN
> 1:05 W4RK Bill JEFF CITY, MO
> 1:09 N0NBD Paul HUMBOLDT,
> Lets try that report again and see if it looks better this time
>
>
> 1:02 N9RLO John UPLAND, IN
> 1:05 W4RK Bill JEFF CITY, MO
> 1:09 N0NBD Paul HUMBOLDT,
|
By
Wendell Morrill
·
#1849
·
|
|
80 CW Checkns revisited
Lets try that report again and see if it looks better thistime
1:02 N9RLO John UPLAND, IN
1:05 W4RK Bill JEFF CITY,
Lets try that report again and see if it looks better thistime
1:02 N9RLO John UPLAND, IN
1:05 W4RK Bill JEFF CITY,
|
By
WA0ITP
·
#1848
·
|
|
80M Cw Checkns
80 was "soft" again tonight, and became more noisy as the net proceeded. I also
had some deep qsb that prevented at least one check in, and made it tough for
most. I heard a few waay down in the
80 was "soft" again tonight, and became more noisy as the net proceeded. I also
had some deep qsb that prevented at least one check in, and made it tough for
most. I heard a few waay down in the
|
By
WA0ITP
·
#1847
·
|
|
Late net cancelled
The late net is cancelled - got boomers only a few miles away and I'm seeing the first lightning.
Stay safe everyone and God Bless de Wayne - KC0PMH
--
http://www.qsl.net/kc0pmh/ Under construction
The late net is cancelled - got boomers only a few miles away and I'm seeing the first lightning.
Stay safe everyone and God Bless de Wayne - KC0PMH
--
http://www.qsl.net/kc0pmh/ Under construction
|
By
Wayne Dillon
·
#1846
·
|
|
Re: Heard k8iqy,s rig sounded good in SE ks have not heard anyone else
Thanks for the Q Wayne, conditions were kinda rough on this end. Glad you could hear me and the SS-40 Xcvr. A photo of the rig I was running is attached.
72,
Jim, K8IQY
Thanks for the Q Wayne, conditions were kinda rough on this end. Glad you could hear me and the SS-40 Xcvr. A photo of the rig I was running is attached.
72,
Jim, K8IQY
|
By
Jim Kortge
·
#1845
·
|
|
Re: Heard k8iqy,s rig sounded good in SE ks have not heard anyone else
When we finally made it the "IQY" rig sounded bloomin' marvelous! what a beautiful signal, well done Jim.
72/3 es God Bless de Wayne - KC0PMH
--
http://www.qsl.net/kc0pmh/ Under construction but
When we finally made it the "IQY" rig sounded bloomin' marvelous! what a beautiful signal, well done Jim.
72/3 es God Bless de Wayne - KC0PMH
--
http://www.qsl.net/kc0pmh/ Under construction but
|
By
Wayne Dillon
·
#1844
·
|
|
early net
Well the early net was a struggle, heavy QRM/N so let's try again at 01:30z
thanks and God Bless de Wayne - KC0PMH
--
http://www.qsl.net/kc0pmh/ Under construction but please visit anyway.
QRP -
Well the early net was a struggle, heavy QRM/N so let's try again at 01:30z
thanks and God Bless de Wayne - KC0PMH
--
http://www.qsl.net/kc0pmh/ Under construction but please visit anyway.
QRP -
|
By
Wayne Dillon
·
#1843
·
|
|
Re: Heard k8iqy,s rig sounded good in SE ks have not heard anyone else
Tnx for the report Paul. 1st Q with the new toy. It works really well! :-)
72 and thanks again,
Jim, K8IQY
Tnx for the report Paul. 1st Q with the new toy. It works really well! :-)
72 and thanks again,
Jim, K8IQY
|
By
Jim Kortge
·
#1842
·
|