Pardon the public service announcement but it seems important and I was given permission to post the email to the 4SQRP Group. .......snipped from Larry's List....... Calling All Elmers! As you may

I'll bring a couple of extension cords and a couple of 6 outlet strips. Bob Groh, WA2CKY

no, I do not also pin o on the Si5351 should have around 1.86 volts has no voltage the rest of the pins fine

Terry- Jim Pruitt forwarded me your message mentioning no voltage on the ATmega328 pins 5 and 16. I gave him several suggestions, and I'm sure he'll send them to you. When you briefly press the

the Si5351 0 pin as no voltage it should be about 1.68 volts and I am not getting any audio any suggestions on fixing this. all the rest of the pins on the Si5351 are right. thank you

These are heavy, expensive, and need to be guyed, but I can replace my dipole ropes without leaving the ground or shooting a projectile at the neighbor's house. It was worth the peace of mind for

If you're participating in the Build-a-Thon, please bring an extension cord and/or power tap for your soldering iron or other electrical needs. I don't have nearly enough for 50

Don't know about the 40 ft pushup pole, but SOTA has a 32 ft lightweight pushup pole, https://www.sotabeams.co.uk/compact-light-weight-10-m-32-ft-mast/ also I found a shorter pole (mini) available in

What is your 40ft pushup pole...I am looking for something like that. Doc K5OSA

Rev George was the kind of person that if the church he pastored was close to me I would have considered changing and I have attended the same Wesleyan Church for 45 years. He was so approachable and

Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 13 March 2019 8:00pm to 9:00pm (GMT-05:00) America/Chicago Where: 40 and 80 Meters Organizer: jomatlock@... Description: The 40

Latest little project from the "Triumvirate Skonk Worx" (W0EB, W2CTX, N5IB) Just got the boards in and all the kit parts for this little adapter. It allows the DC input to be connected through an

Don't forget to send in your SSS  score, preferably by early tomorrow.  I plan to post the results either tomorrow night or Wednesday morning. I truly hope nobody missed the sprint due to the time

I made one of those just for chuckles too. Some day I may have to use it due to aging hands syndrome, now I'm using a J-38 SK and enjoy that. Also built a side swiper from QRPGuys in anticipation of

I was a member of GQRP for many years, up until recently. I never had the pleasure of meeting  G3RJV myself. I did have a small email conversation with him once. Sorry to hear about his passing.

Thanks for posting this Walter. I don't have a KX3, but I do have a KX2 and this has the potential of becoming a very nice addition to the "Go Kit" along with the 40' fiberglass push-up mast that

I met him at FDIM (Four Days In May) the one year I was able to make Dayton some years back. Since I'm the membership chairman of the Flying Pigs QRP Club, and Ed Hare (W1RFI from ARRL) is the chief

I never met George Dobbs, G3RJV but I would have really liked too. I have read many of his writings and appreciate his designs and leadership for G-QRP. I have built a few of his projects and had

I was looking for a keyer on the internet and was holding my mouse. It struck me that the mouse would make a fairly decent key for my ubitx radio. The ubitx has the firmware in place to support and it

Just copied this from the GQRP list: ]]] It is with a heavy heart that I have to report that the Reverend George Dobbs, G3RJV, founder of the GQRP Club passed away in the early hours of this