I pulled out the Cricket 40 and plugged in the 7.122 crystal. Never heard a bit of CW. Heard a lot of broadcast stations... no CW. I called CQ several times thinking perhaps i might attract

Here in NJ Johnny you would peak at 559 but then have unreadable moments. KV6Z was 449, WAØITP 229, WA5BDU 559. After WAØITP, N4DR tried unsuccessfully to QNI. He was 589 here but there was no

THANKS TO EVERY ONE WHO CHECKED INTO THE NET TONIGHT NK80 CHARLES WA0ITP TERRY WG5F ED N0TGR DICK K0WDO WILL AB0AH LARRY KC0HIO BRAD K5EST WALTER AC0BQ JOHNNY N4DR MARC 73'S BERT N0YJ

Ge Guys Rough going on the 80 meter Net tonight. We had t storms west of us, so my qrn was above s7! Check in’s were : Bill KV6Z WA0ITP TERRY WA5BDU NICK We had another station trying but I

Thanks for picking me up, Bill. I heard everyone except Paul who lives too close to me. It was nice to have the band noise way down on 40 for a change. 73, Martin K0BXB

A great one tonight. QNIs were: K3NLT Russ VA WA9PWP Paul WI WB5OJJ Al TX N4DR Marc MD K0BXB Martin WI W2SH Chas NJ TNX all and see

Wednesday Evening 40 and 80 meter Nets When: Wednesday, 10 April 2019 8:00pm to 9:00pm (GMT-05:00) America/Chicago Where: 40 and 80 Meters Organizer: jomatlock@... Description: The 40 Meter Net

Dear All, Was reading last week (while on vacation in China) the 4SQRP email on your successful OZARCON19 meet. Congratulations! Question: Is there an web accessible SDR rx in your area capable of

Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 10 April 2019 8:00pm to 9:00pm (GMT-05:00) America/Chicago Where: 40 and 80 Meters Organizer: jomatlock@... Description: The 40

Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 10 April 2019 8:00pm to 9:00pm (GMT-05:00) America/Chicago Where: 40 and 80 Meters Organizer: jomatlock@... Description: The 40

Pictures or it didn't happen, Jim! ;-) 72, Nate -- "The optimist proclaims that we live in the best of all possible worlds. The pessimist fears this is true." Web: http://www.n0nb.us GPG key:

Jim I understand the software issue I belong to a Maker Group and the printers they use have a different software to control. All I can say is this is one of the best things I have gotten in a long

Hi Tom, I have but Cura doesn't support this printer as far as I can tell. That's due mainly to the fact that it also has the laser engraver and CNC carving heads on the the same XYZ platform. I

Have you looked at Cura it is a slicer software version 4 is out. I have an Ender3 from Banggood has. 250x250x250 mm bed it only does 3D printing but is a good machine for the money about 180.00

Thanks Ray, I HAD done a bit of research into slicers, 3D CAD programs and the like. At one time, I could work in Auto-Cad, but that was many years back and I've forgotten most of what little I did

I'd like to wish you a belated Happy Birthday! Similar story - my wife bought me a 3D printer for my 80th birthday. I will warn you - it becomes addictive. My first print was a

Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 10 April 2019 8:00pm to 9:00pm (GMT-05:00) America/Chicago Where: 40 and 80 Meters Organizer: jomatlock@... Description: The 40

Very nice Jim. What brand of machine did you get? I have a small one but it only does the filament printing. Tim N9PUZ

Hi Dave, We got it from B & H Photo and it's a SnapMaker 3 in 1 3D Printer, Laser Engraver and CNC carver. $679.99 shipped and they shipped it FedEx Home Delivery. It was here in 2 days from New

Happy belated 77th Birthday Jim and I hope many more. I think it’s great that at 77 your still on the forefront of technology. I hope I can do the same when / if I get to 77. 72s 73s and of course