Curt, please keep us posted on your progress with the Ozark Patrol receiver when finished. I checked all resistors before using them here and all were ok. I have problems with regeneration being way

Is this still available Ken ? Charlie , W5COV

This has been sold. Thanks N1ESE <jt.tobit@...> wrote:

Would anyone be interested in a nicely assembled QRPGuys 40m-10m UnUnTenna Plus? It is ready to use, just add radiator and counterpoise. Photo attached. Complete information

Dear folks: I am thinning the herd around the shack and because I have lost interest in this nearly completed project, I want someone in 4sqrp who is interested to have it. Will send to first come,

More experiences with problematic parts. Building the Ozark Patrol yesterday, three of the caps in the kit (C2, C8, and C9) are obviously and easily recognized from you know where.. I always test

Hi all, I built my Nouveau 75A last week and find the receiver very sensitive. My output power is around 3 watts at 3.705 MHZ and 2 watts at 3.880 MHZ. In Ohio there are stations on 3.875, 3.880

Rex, What time in the morning do you start? I’ll try to be there with my N75a. 73 KG0DQ

Hi John - I have not had a sensitivity problem and two other Nouveau 75A owners here in Minnesota that I regularly talk with report that the sensitivity is good on their units as well. Have not

I posted this to the N75 sub group but I'm not sure who might get it there so I will post here as well just in case. Regarding a PTT solution for my Nouveau so that it will key an external amplifier

Gm Chas Well you were pretty thin, but I did get ur call and a valid signal report. Good enough for me! Take care, Stay Safe! 72 Johnny AC0BQ -- Check out the 4SQRP website at 4sqrp.com

I sort of figure that in northern NJ I'm probably the "DX" outlaw for these Wednesday evening events, for which we have Johnny to thank for being our host on both bands. 40m was a piece of cake with

Thanks to all of tonights check ins WG5F ED N0MII JEFF N0TGR DICK KU5M JOE KC0IFQ DENNIS KC0PP KEITH W8NWA MIKE K0EMT BRYAN AC0BQ JOHNNY N4DR MARC 73'S BERT N0YJ STAY WELL

Ge Group Very nice turn out, it appears lots of us are at home now days! I hope this email finds you and your's safe and well! Very nice turn out! Check in's were 40 Meters N4ELM DAVE WA9PWP PAUL

Wednesday Evening 40 and 80 meter Nets When: Wednesday, 15 April 2020 8:00pm to 9:00pm (GMT-05:00) America/Chicago Where: 40 and 80 Meters Organizer: jomatlock@... Description: The 40 Meter Net

K0KP's External PTT doesn't have to be used for an amp, it could be used for a T/R switch, switching antennas, an RX preamp, or other stuff. --Donald, KB5PWL

Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 15 April 2020, 8:00pm to 9:00pm, (GMT-05:00) America/Chicago Where:40 and 80 Meters View Event Organizer:

Hey John, Maybe you want to amplify your Nouveau because... You and your best friend now live out of range of a Nouveau 75, but an amp lets you ragchew reliably. What's better than ragchewing with a

Measured the signal on mic input and it was RF! Right on TX frequency. Audio is getting thru but swamped by RF signal. Tim

More testing Connected mic on bench to DC pwer thru 1K resistor, shorted PTT and measure 40mV P-P on oscope while talking in normal voice, seems abt right Tapped into the mic jack on rig, activated