Will do. Thanks for the suggestion.

Try qrp-tech groups.io -- 72/73, Dan NM3A

Unfortunately Marshall Men has become a silent key. I do not know what had happened to his business. Russ K3NLT

Charles: I didn't admit you into the group. I just looked up your member number. The "powers that be" admitted you into the group. I think if you have a valid amateur license

Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 27 May 2020, 20:00 to 21:00, (GMT-05:00) America/Chicago Where:40 and 80 Meters View Event Organizer:

A young feller I know real well is listing a gently used Iphone, ask him for details There isn't anything wrong with the phone, works perfectly. They got a new I6s for me for Father's day, and Matt

Good afternoon. I am glad to be admitted into this group. I have been trying to find instructions for the Oak Hills Research Sprint 1 30 meters QRP rig (from around 1992 or 1993). I built it in

John Thank you very much for admitting me into the group. I am very intrigued by the Sprint; I will try it once I get a qrp transceiver up and running. Thanks and 73 Charles KN6KR

Charles: I just looked up your call on the 4SQRP member list and I see you are there, which means you are officially a member of 4SQRP. Your member number can be found by hovering over

Gm Charles Looks like your in! Welcome to the 4 SQRP group. 72 Stay Safe. Johnny ACØBQ -- Check out the 4SQRP website at 4sqrp.com

Welcome to the group! 72/73 Doc K5OSA

I would like to confirm my account with 4sqrp. Thanks Charles KN6KR

Do you want any more books? I have 5 or 6 to donate having radio communications in them. Jack, NI8N Jack Hubbard NI8N

Gm Guys Hope your all have a Safe Memorial Day. Just FYI, Dave Cripe NMØS designed the Ozark Patrol. 72 Johnny ACØBQ -- Check out the 4SQRP website at 4sqrp.com

Thanks Jerome! Herb

Thanks again Curt! Herb

"I even removed L1 and reversed it" Be sure to put the toroid back as shown in the build manual. If the "sense" for the one-turn tickler is wrong the regeneration won't. So trying to correct low

Hi Herb, Try melting and re-flowing the solder on each of the solder pads, one lead at a time for each component, then recheck your voltages. Before doing this to the torroid coil windings, measure

I'll send these two books and also "Between Silk and Cyanide" by Marks in a few weeks. You will really enjoy Mark's book. 73 Jack, NI8N

Thanks Curt! Herb