Stay cool, Norm! Seems if we could split the difference between the hot and cold spots in the world, it would be quite comfortable! 72, de Nate >> -- "The optimist proclaims that we live in the

Hi all, No snow here yet, temperature just passed 43 degrees Celcius (+\~ 112 F). I usually put on my woolies when the temp drops below 30 C! Norm VK5GI Willunga, South Australia Sent from my

Snow has tapered off here.. with the wind dropping off too.. have a couple inches of fluffy dry stuff... is all. But the cold is a-comin in now... fig to go down to around 3 tonight.. it's 14 now.

Johnny is it snowing there yet. The radar looks like it is close... I gotta see if Terry is getting snow...... de Paul Smith N0NBD Sent from my iPad

Tnx Johnny,,, the noise was high here but 40 was full of RTTY will try again tomorrow... de Paul Smith N0NBD Sent from my iPad

Listening, just static here! 72 Johnny AC0BQ -- QRP....."more smiles per watt"

De n0nbd CQ CQ CQ

Thanks Terry and Have a good windy day.. inside!! on the bench Have a great day, --... ...--Dale - WC7S in Wy To: 4sqrp@...; daleputnam@... From: wa0itp@... Date: Sat, 4 Jan 2014 08:05:18

K tnx I just tunes bit lower to avoid qrm I'llcall you ---------------------------------- Back to the bench,Winter's too valuable to waste. I love this radio stuff ! 72

yep Have a great day, --... ...--Dale - WC7S in Wy To: 4sqrp@... From: wa0itp@... Date: Sat, 4 Jan 2014 08:03:35 -0600 Subject: [4sqrp] Cyclone on 7120 Anyone around for a

Anyone around for a signal report on this warm Winter day? ---------------------------------- Back to the bench, Winter's too valuable to waste. I love this radio stuff ! 72

Rick, I used Far a few years ago. At that time he did the processphotographically (still does except for ExpressPCB) . I wouldsubmitt my negative artwork for the PCBs. The board quality wasgood and

I know this is an old thread, but Chuck thanks for this information. Futurlec's pricing is very good. We had a couple projects at work some time ago where I used ExpressPCB to make some boards. I

A thought I have is if you want to go for the "built in" look is to get a small converter board and install it in the rig itself. Here are a couple options that indicate they are

I strongly recommend that nobody buys a Prolific USB as I have also suffered a lot of problems with them. (or what I thought was Prolific, they may have been the unlawful copy) It is highly possible

I second that Bruce...........and as per Terry's note this AM, tnx to all the kitters packing kits for 4SQRP......making the OzarkCon a reality! tnx OMs. Unc Phil in Lawrence

Jim - Two wires were plenty heavy enough and fit well with the connector I was using. Plus, I was just powering a flat screen monitor - not arc welding! Otherwise, yes. You are correct. Bruce -

Actually, in that case, you should have paralleled the 2 red wires and the 2 black wires. Just using one red and 1 black you diminished the current capacity of the p/s. They had them paralleled for

Roy - Recently I purchased a similar power supply and when I cut the plug, there were FOUR wires. Two red and two black. Both had the proper voltage and ohmed out that the two red and the two

Only 91 days left until Ozarkcon. I'm marking off the calendar... Bruce - KK0S