Welcome to the RMR net today, with snow on the way, and the wind up.. again. I will be using my temp antenna, that is 20 foot at the apex, and hopefully be able to use relays too. Drop by, say hi.

Hello folks: This is your reminder that the February 4SQRP luncheon gathering will be this upcoming Saturday, the 16th, at the Country Kitchen in downtown Seneca, MO. Lunch will be at 11:00

I found this posted on the AMRAD list this morning. It is an excellent way to wind toroids! http://www.youtube.com/watch?v=GT44U10WqRA 73 Dave NM0S

test uncle phil..........see ya all atozcon

It's been a while since I made it to Seneca, so will be looking forward to seeing everyone on Saturday. -- Tom Sevart N2UHC St. Paul, KS

The IHAB Balloon Launch from the lawn of Rockwell Collins in Cedar Rapids, IA will be carrying a 20M beacon built by Dave Cripe, NM0S. Due to the CW DX contest monopolizing the lower end of the

Dave, I've had a little trouble with my truck. I replaced what the shop said was a bad battery, but it seems to be still running a little rough. I think we'll stay near town until I'm convinced

what time, Terry?

Thanks Scott, sri I missed postingthat. The launch crew is planning a 9AM CSTlaunch, wx permitting. A nice day is predicted so I'll begin listening abt8:30A. ---------------------------------- I

Tks to everybody who replied both on and off list to my T/R Switching query. Overall, it looks like the Magic Box is the way to go. I can experiment and expand from there. Forecast: Partly QRP with

The launch took place at 9AM CST as planned. The CW beacon is working well I have it at abt 569 on 14.323.5. The GPS isnt working at this point in the flight, so there is no tracking available.

569 @ 10:29 AM EST in Williamson, NY 14589 72 George/W2BPI

Copying it at 579 peaking 599 and with QSB down to559 at 1540Z in College Station, TX (Southeast centralTX). 72/73...Herb K5HG

Tnx Herb, appreciate thereport. All: if you hear the beacon, psespot it on qrpspots.com Thos spots will be included in areport. thanx ---------------------------------- I love this radio

I'm posting this so you dont spend continue to look for the IHAB9 Beacon on 14.323. The launch was at 1500z and the beacon worked well until 1553z when it developed a chirp, then it failed at

Anybody have an answer for this fellow? See you all at Ozarkcon. Tim WB9NLZ ----- Forwarded Message -----

Unfortunately, the hole through cladding connects the top of the board to the bottom of the board, in three cases. Those in particular are critical to have continuity. The others not so much just

I have used an IC mount for an 8 pin chip before and cut it up into 8 different pieces. I soldered the pin end to the board then could mount the desired device into the pins. This is also useful for

David, Issues or questions related to the 'e-mail reflector' should be sent to AE5K. To all, please notice the "Contact Us" button on the 4sqrp web page. this will help