Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 7 October 2020, 20:00 to 21:00, (GMT-05:00) America/Chicago Where:40 and 80 Meters View Event Organizer:

Hi Woody, loong time no hear hope all is well with you. Were you able to resolve this issue? Are you talking abt R46 in the Magic Box? Happy to help if I can. -- Tnx es 72 WAØITP WAØITP Home

Roland, Thanks for sharing that ! Nice to see a successful QRPp QSO. John KK4ITX Click Here for Zephyrhills Area Amateur Radio Club Many of life's failures are people who did not realize how close

Hi all! Thought I would hang out with you all and find out about QRPp. About myself. About 13 years ago I founded the AT Sprint group on yahoo. With KD1JV Steve’s blessings. Now I’m part of his

Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 7 October 2020, 20:00 to 21:00, (GMT-05:00) America/Chicago Where:40 and 80 Meters View Event Organizer:

Woody This you probably already know But these links might help at least with documtation http://www.4sqrp.com/saVXO.php http://www.4sqrp.com/SS40.php 73’s Andy - GM0NWI

I am running the above and finally got around to swapping out R46. Replaced the 1 MegOhm resistor with a 100 ohm resistor. I had that on my list of things to do to allow for spotting of the SAVXO in

Dave Ingram (SK) had the Hamfest Buddy. Rex at QRPme Made and updated Version (with Filtering) that is a no solder kit. His Schematic is on the QRPme Site. Dave's CQ Article Link should be attached.

Thanks guys for the feedback. I will try some of those hints and see what transpires. Somewhere in all of my junque I have a Wave Forms microwatt meter that measure from about 1.5 watts down to

Gwen, Oh, yeah! I just ordered one of those little beasties a couple days ago on Etsy. As for a receiver, I have a "Yeahoo" FR-101 which should fill the bill (it's the receiver only twin to the

https://www.qsl.net/wb5ude/kc6wdk/transmitter.htmlThis one peaked does 500mw, after you time it measure capacitance and put a fixed cap in it, a simple attenuator would knock it down to your

Stout price! A 2n2222 and a crystal will get you in the ballpark. Mike KD5KXF

There's a guy I've bought from on Etsy (I got his SlinkTenna) who makes tiny keychain transmitters, complete with a little straight-key-esque button for tapping out code. It's basically an oscillator

Epson 4mw programmable oscillators 4$ ea are handy. SG8002 is the series. John k5mo

An easy modification would be to put an attenuator between the output of the transmitter low pass filter and T/R switch. It just takes a few resistors. Don't put it in line with the antenna, though,

Are there any kits or construction plans for a QRPp transceiver in the 10 - 50 milliwatt category? In the alternative, maybe some ways to modify existing QRP rigs, such as "Pixie", "Frog Sounds",

Good nets. It was nice to catch Terry WA0ITP before the 80 meter net. FYI here is my “QRP station” that I check in with. The HB-1B with my N3ZN “ZN QRP” paddle. For a better look at that

Ge Group I called all 3 nets tonight. Bert is out of town and asked If I would take the Dme Net. CW Net Report 40 Meters Check in's were: N4ELM DAVE WA9PWP PAUL N4KV JOHN W2SH CHAS W5GNB GARY

Wednesday Evening 40 and 80 meter Nets When: Wednesday, 30 September 2020 20:00 to 21:00 (GMT-05:00) America/Chicago Where: 40 and 80 Meters Organizer: jomatlock@... Description: The 40 Meter Net

Yes I did John Fat fingers again! 72 Johnny ACØBQ -- Check out the 4SQRP website at 4sqrp.com