|
Re: sidetone
RE: SideTone.
I built a simple - battery powered Xtal tester. I put the Xtal I am using that day in the tester and hold it close to the receiver.
Simple way to tune the receiver to the exact
RE: SideTone.
I built a simple - battery powered Xtal tester. I put the Xtal I am using that day in the tester and hold it close to the receiver.
Simple way to tune the receiver to the exact
|
By
N7RKC, Mike
·
#25505
·
|
|
Re: Scraping insulation off magnet wire for toroids
Many message boards do not allow posting of wesite links. So, that is why I posted as I did. I assume most of us are familiar with the Google machine. Here is the
Many message boards do not allow posting of wesite links. So, that is why I posted as I did. I assume most of us are familiar with the Google machine. Here is the
|
By
J.K. Wright
·
#25504
·
|
|
Re: sidetone
Ted,
Interesting. I would also be looking to use it for POTA just for fun also.
Matt
Ted,
Interesting. I would also be looking to use it for POTA just for fun also.
Matt
|
By
Matthew Halsey
·
#25503
·
|
|
Re: Check this out on Amazon Knipex stripper
Thank you David. I found it with your link and ordered them.
I never met Tiny URL so I dont understand everyone else's comments.
Eric WS4K LICW#575
Thank you David. I found it with your link and ordered them.
I never met Tiny URL so I dont understand everyone else's comments.
Eric WS4K LICW#575
|
By
Eric WS4K LICW#575
·
#25502
·
|
|
Re: sidetone
I took the wimpy route since I already had a CW filter in hand to add in, and didn't feel like spending $40 on the Souper kit. I took a 555 circuit and put it into the box so that (with diode
I took the wimpy route since I already had a CW filter in hand to add in, and didn't feel like spending $40 on the Souper kit. I took a 555 circuit and put it into the box so that (with diode
|
By
Ted
·
#25501
·
|
|
sidetone
Forgive me if this has been asked before.
Is there a simple way to hear sidetone without the Soup’er Up’er?
I am considering getting a Bayou Jumper for Christmas while I pluck up courage to start
Forgive me if this has been asked before.
Is there a simple way to hear sidetone without the Soup’er Up’er?
I am considering getting a Bayou Jumper for Christmas while I pluck up courage to start
|
By
Matthew Halsey
·
#25500
·
|
|
Re: Scraping insulation off magnet wire for toroids
This is a response I see all too often on the interwebs: You Googled it and it came up. Cool.
It would have taken no more work to post the link that you found so easily, than it did to type that
This is a response I see all too often on the interwebs: You Googled it and it came up. Cool.
It would have taken no more work to post the link that you found so easily, than it did to type that
|
By
Ted
·
#25499
·
|
|
Re: Scraping insulation off magnet wire for toroids
Just Google search A Toroid Tutorial and it comes up.
NK2C
Just Google search A Toroid Tutorial and it comes up.
NK2C
|
By
J.K. Wright
·
#25498
·
|
|
Re: Check this out on Amazon Knipex stripper
Thank you Phil. I have tried the shortened URL and had folks say it didn’t work. May try it again next time. Had it occur in my first email about my Knipex wire stripper so I just used the whole
Thank you Phil. I have tried the shortened URL and had folks say it didn’t work. May try it again next time. Had it occur in my first email about my Knipex wire stripper so I just used the whole
|
By
David Wilcox K8WPE
·
#25497
·
|
|
Re: Scraping insulation off magnet wire for toroids
Charles. If you have a copy of the article, I would like to see it. Thanks
73 Bill
Charles. If you have a copy of the article, I would like to see it. Thanks
73 Bill
|
By
William Fogel
·
#25496
·
|
|
Event: Wednesday Evening 40 and 80 meter Nets - 10/27/2021
#cal-reminder
Reminder: Wednesday Evening 40 and 80 meter Nets
When:
10/27/2021
20:00 to 21:00
(UTC-05:00) America/Chicago
Where:
40 and 80 Meters
Organizer: jomatlock@...
View Event
Description:
The
Reminder: Wednesday Evening 40 and 80 meter Nets
When:
10/27/2021
20:00 to 21:00
(UTC-05:00) America/Chicago
Where:
40 and 80 Meters
Organizer: jomatlock@...
View Event
Description:
The
|
By
main@4SQRP.groups.io Calendar <noreply@...>
·
#25495
·
|
|
Re: Scraping insulation off magnet wire for toroids
The easiest way to remove the enamel insulation is to cut a postage stamp size (or slightly larger if you have fat fingers) piece of medium grit sand paper. Fold it in half. Then fit the portion of
The easiest way to remove the enamel insulation is to cut a postage stamp size (or slightly larger if you have fat fingers) piece of medium grit sand paper. Fold it in half. Then fit the portion of
|
By
w2sh@...
·
#25494
·
|
|
Re: Check this out on Amazon Knipex stripper
Unfortunately some firewalls will block the tinyurl links. Sonicwall is what my place of business uses. It’s a pain because a lot of people use that service.
Allen Wisbey, W1SBY
Unfortunately some firewalls will block the tinyurl links. Sonicwall is what my place of business uses. It’s a pain because a lot of people use that service.
Allen Wisbey, W1SBY
|
By
William Wisbey
·
#25493
·
|
|
Re: Check this out on Amazon Knipex stripper
There’s also tinyurl.com which will turn the link into something smaller, e.g.,
https://tinyurl.com/m9d2txxe
73,
Bob, WK2Y
There’s also tinyurl.com which will turn the link into something smaller, e.g.,
https://tinyurl.com/m9d2txxe
73,
Bob, WK2Y
|
By
Bob
·
#25492
·
|
|
Re: Check this out on Amazon Knipex stripper
These kinds of URLs can be reduced to a minimum needed to get to the product BECAUSE they are using a very simple system:
dp/ or dp/product/ are the folders used for their products and then the
These kinds of URLs can be reduced to a minimum needed to get to the product BECAUSE they are using a very simple system:
dp/ or dp/product/ are the folders used for their products and then the
|
By
PhilKE3FL
·
#25491
·
|
|
Check this out on Amazon Knipex stripper
I would like to recommend this product at Amazon
KNIPEX Tools - Coated-Wire Stripping Tweezers (1511120), 4.75
More information:
I would like to recommend this product at Amazon
KNIPEX Tools - Coated-Wire Stripping Tweezers (1511120), 4.75
More information:
|
By
David Wilcox K8WPE
·
#25490
·
|
|
Re: Scraping insulation off magnet wire for toroids Knipex Stipper
Tweezers Knipex Stripper
https://www.amazon.com/dp/B003RWS8XE/ref=cm_sw_em_r_mt_dp_GRJB5E9ST50YMM0302G7
David J. Wilcox’s iPad
Tweezers Knipex Stripper
https://www.amazon.com/dp/B003RWS8XE/ref=cm_sw_em_r_mt_dp_GRJB5E9ST50YMM0302G7
David J. Wilcox’s iPad
|
By
David Wilcox K8WPE
·
#25489
·
|
|
Re: Scraping insulation off magnet wire for toroids
There were desoldering irons with a rubber suction bulbs available similar to this:
RadioShack 45 Watt Desoldering Iron NOS years ago. There are other ones still available on eBay.
The idea is to
There were desoldering irons with a rubber suction bulbs available similar to this:
RadioShack 45 Watt Desoldering Iron NOS years ago. There are other ones still available on eBay.
The idea is to
|
By
David Wilcox K8WPE
·
#25488
·
|
|
Re: Scraping insulation off magnet wire for toroids
OM,
No problem and thanks for the clarification.
Please share if you've the time and inclination a bit more about those electronic agricultural products you work on.
Our family enjoyed an
OM,
No problem and thanks for the clarification.
Please share if you've the time and inclination a bit more about those electronic agricultural products you work on.
Our family enjoyed an
|
By
W6BOW
·
#25487
·
|
|
Re: Scraping insulation off magnet wire for toroids
Hah! I need to proof read before I hit "send."
They become "electronic" products once we add the ICs to the circuit boards! :-)
Tim N9PUZ
Hah! I need to proof read before I hit "send."
They become "electronic" products once we add the ICs to the circuit boards! :-)
Tim N9PUZ
|
By
Tim N9PUZ
·
#25486
·
|