I finally managed to get a decent photo of the bent lead. I just don't know if I have the magnification and lighting to fix it myself. I only saw it with the help of a 10x jewelers loop and I can't

One corner lead is bent and laying on top of it's neighbor. I'm trying to take a somewhat decent photo of it. To try and save it, I'm going to have to make some serious lighting and magnification

If it is just a bent pin then take a jewelers screwdriver and heat the pin while using the screwdriver to nudge it right. Very few mistakes are fatal to a kit. I have an ats I burned off a trace

​​On Sun, Apr 19, 2015 at 1:31 PM, JT Croteau jt.tobit@... [4sqrp] <4sqrp@...> wrote: Cheer up. Did the lead break off such that there's no connection or is it bent such that it shorts out

I had really high hopes in my skill to pull off assembly of this kit but I am off to a terrible start even after doing a fair amount of practice SMT soldering before hand. The I/O board came out

With condx the way it has been and QRP I'm not anticipating more then one or two two contacts. But I also expect to have a whole lot of fun. The Sprint falls neatly in between the race and Spurs

Don't forget. Tonight's the night for the 4SQRP monthly sprint, starting at 7:00 pm CDT. If you are reluctant to get on the air because your fist is rusty, this is the perfect opportunity to shake

I built that power meter several years ago - a very good tool. Mine has been tested up to 500 mHz. The response is down about 3 dB at 500 MHz. Shield the input carefully, -70 dBm is the

Thanks for the link. I'll just wait for my membership approval to view the circuit. -- Tom Sevart N2UHC St. Paul, KS

Thought I'd better dig it out for you. It was buried

Tom, google "simple qrp qsk tr switch" and you'll find a nice one by N5ESE. Jim, W0EB Sent from my iPad

GA Tom, Checkout the NS-40 group photos. I uploaded a simple rf driven t/r switch a loong time ago. It was part of my cardboard combo and worked quite well. 72

Hi all, I won an NS-40 at Ozarkcon, got it put together quickly today and on the air into a dummy load with 5 watts. I plan to pair it with a VRX-1 receiver which I had laying around, but I need a

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Keep safe. - -- David Lininger, kb0zke EM37kt Rev. 2:10 kb0zke@... -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.22

Arrgh! T-storms and a tornado watch now that I have time for QSO's. 72/3, Doc K5OSA - QTH: EM04sr ARRL 4SQRP #801 - NAQCC #7625 - SKCC #10098 - FISTS #17157 - OMISS #9886 LFSARC (Lawton/Fort Sill

No, it can’t do R. I was just writing fast and listening to my dog at the time. J But I actually was thinking about building an ohm meter this week. I have been wanting to do that for a

I originally built the Bill Carver L/C meter (I did not know it also did "R"), and it worked quite well. I did not get to the point of creating a spreadsheet to translate the readings, but

Thanks Dave. 72 WAØITPI love this radio stuff.www.wa0itp.comwa0itp@... On 4/18/2015 2:35 PM, ad7jt@... [4sqrp] wrote:

I just loaded a copy of my presentation slides to the files area. Let me know if you have trouble opening and viewing them and if you have any questions about the NAT - SNA. 73, Dave Collins -

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the 4sqrp group. File : /SNA Presentation-ozarkcon-2015/SNA