Date   

Re: 0030 net on 40

Bob Macklin <macklinbob@...>
 

I'm retired too!
 
I use contest days to test my receivers. I find 40M best between 6PM and 10PM local time.
 
80M is no good here anytime. At least anytime I listen. It used to be good for local operation in the early evening and then good for DX after 10PM local time.
 
Bob Macklin
K5MYJ
Seattle, Wa.
"Real Radios Glow In The Dark"

----- Original Message -----
Sent: Thursday, June 22, 2017 5:21 AM
Subject: Re: [4sqrp] 0030 net on 40

 

I too am retired and usually can scare up a SKCC contact or two at 7-8 am CDT and again at 9-10 pm. I have to share the airtime with my son that is a digital operator. He turns in at 9 so I have an hour more to play. I too expect the bands to jump on the weekend. we will se. de Paul N0NBD


Sent from Outlook




From: 4sqrp@... <4sqrp@...> on behalf of buddy presley fisherbud@... [4sqrp] <4sqrp@...>
Sent: Thursday, June 22, 2017 5:23 AM
To: 4sqrp@...; m p
Subject: Re: [4sqrp] 0030 net on 40
 
 

I believe the band is fit to be used.  Watch it explode on Field Day.  The ops just are'nt getting on.  But my rhythm is off too.  I like to get on from 1 to 4 pm while others are working.  I'm retired.


On Wednesday, June 21, 2017 8:49 PM, "m p ka8onw@... [4sqrp]" <4sqrp@...> wrote:


 
I'm listening on 7.122 and only hearing a couple of high speed CW ops

Mark
KA8ONW



From: "Paul Smith psmith61@... [4sqrp]" <4sqrp@...>
To: "4sqrp@..." <4sqrp@...>
Sent: Wednesday, June 21, 2017 8:41 PM
Subject: [4sqrp] 0030 net on 40

 
I called for a while and heard:
AA5AB
K4EQ
WA9PWP
I called each one several times and no returns. I have a S9 plus noise level here and it is hard on the ears even with a TIGHT Elecraft filter... Ill try at 8 pm CDT
de Paul N0NBD

Sent from Outlook





Virus-free. www.avast.com


Re: 0030 net on 40

Paul Smith
 

I too am retired and usually can scare up a SKCC contact or two at 7-8 am CDT and again at 9-10 pm. I have to share the airtime with my son that is a digital operator. He turns in at 9 so I have an hour more to play. I too expect the bands to jump on the weekend. we will se. de Paul N0NBD


Sent from Outlook




From: 4sqrp@... <4sqrp@...> on behalf of buddy presley fisherbud@... [4sqrp] <4sqrp@...>
Sent: Thursday, June 22, 2017 5:23 AM
To: 4sqrp@...; m p
Subject: Re: [4sqrp] 0030 net on 40
 
 

I believe the band is fit to be used.  Watch it explode on Field Day.  The ops just are'nt getting on.  But my rhythm is off too.  I like to get on from 1 to 4 pm while others are working.  I'm retired.


On Wednesday, June 21, 2017 8:49 PM, "m p ka8onw@... [4sqrp]" <4sqrp@...> wrote:


 
I'm listening on 7.122 and only hearing a couple of high speed CW ops

Mark
KA8ONW



From: "Paul Smith psmith61@... [4sqrp]" <4sqrp@...>
To: "4sqrp@..." <4sqrp@...>
Sent: Wednesday, June 21, 2017 8:41 PM
Subject: [4sqrp] 0030 net on 40

 
I called for a while and heard:
AA5AB
K4EQ
WA9PWP
I called each one several times and no returns. I have a S9 plus noise level here and it is hard on the ears even with a TIGHT Elecraft filter... Ill try at 8 pm CDT
de Paul N0NBD

Sent from Outlook





Virus-free. www.avast.com


Re: 0030 net on 40

buddy presley <fisherbud@...>
 

I believe the band is fit to be used.  Watch it explode on Field Day.  The ops just are'nt getting on.  But my rhythm is off too.  I like to get on from 1 to 4 pm while others are working.  I'm retired.


On Wednesday, June 21, 2017 8:49 PM, "m p ka8onw@... [4sqrp]" <4sqrp@...> wrote:


 
I'm listening on 7.122 and only hearing a couple of high speed CW ops

Mark
KA8ONW



From: "Paul Smith psmith61@... [4sqrp]" <4sqrp@...>
To: "4sqrp@..." <4sqrp@...>
Sent: Wednesday, June 21, 2017 8:41 PM
Subject: [4sqrp] 0030 net on 40

 
I called for a while and heard:
AA5AB
K4EQ
WA9PWP
I called each one several times and no returns. I have a S9 plus noise level here and it is hard on the ears even with a TIGHT Elecraft filter... Ill try at 8 pm CDT
de Paul N0NBD

Sent from Outlook





Virus-free. www.avast.com


Re: 0030 net on 40

m p
 

I'm listening on 7.122 and only hearing a couple of high speed CW ops

Mark
KA8ONW



From: "Paul Smith psmith61@... [4sqrp]" <4sqrp@...>
To: "4sqrp@..." <4sqrp@...>
Sent: Wednesday, June 21, 2017 8:41 PM
Subject: [4sqrp] 0030 net on 40

 
I called for a while and heard:
AA5AB
K4EQ
WA9PWP
I called each one several times and no returns. I have a S9 plus noise level here and it is hard on the ears even with a TIGHT Elecraft filter... Ill try at 8 pm CDT
de Paul N0NBD

Sent from Outlook



0030 net on 40

Paul Smith
 

I called for a while and heard:

AA5AB

K4EQ

WA9PWP

I called each one several times and no returns. I have a S9 plus noise level here and it is hard on the ears even with a TIGHT Elecraft filter... Ill try at 8 pm CDT

de Paul N0NBD


Sent from Outlook


Re: 4SQRP 40 meter net

Paul Smith
 

Thanks Johnny

de Pul


Sent from Outlook




From: 4sqrp@... <4sqrp@...> on behalf of Johnny Matlock jomatlock@... [4sqrp] <4sqrp@...>
Sent: Wednesday, June 21, 2017 4:44 PM
To: 4sqrp@...; Paul Smith
Subject: Re: [4sqrp] 4SQRP 40 meter net
 
 

I will have a listen for you Paul.
I just happen to have a SKCC T number as well!
72
Johnny AC0BQ 

On Wed, Jun 21, 2017 at 8:26 AM Paul Smith psmith61@... [4sqrp] <4sqrp@...> wrote:
 

Hello All,

Wayne will not be able to call the 40 meter net tonight. I will give it a go for him. My old note stuck up here says 730 local. Is that correct? If not please let me know. If there any SKCC Centurians, Tribunes or Senators out there let fly your number. I am only 6 out from having my Tribune.

CU tonight on 7122 we can go later if it would work better. let me know de Paul N0NBD 


Sent from Outlook

--
Check out the 4SQRP website at 4sqrp.com


Re: 4SQRP 40 meter net

Bob Macklin <macklinbob@...>
 

That's why we put the 200 foot crankup tower near the telescope. We knew we would get lightning strikes.
 
That mountain top was a scary place during a thunder storm.
 
And all the power wiring on the mountain tops was underground. We got high induced currents.
 
Bob Macklin
K5MYJ
Seattle, Wa.
"Real Radios Glow In The Dark"

----- Original Message -----
Sent: Wednesday, June 21, 2017 2:15 PM
Subject: Re: [4sqrp] 4SQRP 40 meter net

 

I've always heard the opposite, encourage lightning to flow elsewhere,
since lightning jumps through miles of air an excellent insulator there
is not much you can go to stop it except to make somewhere else more
attractive hence lightning rods.

On 6/21/2017 3:41 PM, ronhogrider92@... [4sqrp] wrote:
>
> I always tell people NOT to provide a path for lightning to flow.
>
> Your posting supports that, thank you Bob.
>
> Ron wb1hga
>
> BTW:
>
> I won’t be on tonight as I hoped. I run a
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows 10
>
> *From: *Bob Macklin macklinbob@... [4sqrp]
> <mailto:4sqrp@...>
> *Sent: *Wednesday, June 21, 2017 2:22 PM
> *To: *4sqrp@... <mailto:4sqrp@...>; Doug Reid
> <mailto:n1068d@...>
> *Subject: *Re: [4sqrp] 4SQRP 40 meter net
>
> In the 1980's I worked at the University of Arizona in Tucson. I
> worked on telescopes on Kitt Peak and Mt. Lemmon.
>
> Lightning was a major problem. If you Google Kitt Peak (KPNO) you can
> see photos of the lightning.
>
> I received funding from the National Science Foundation and NASA to
> find solutions to the lightning problem.
>
> We found the best solution was disconnect the incoming power INCLUDING
> THE GROUND at the entrance to the buildings. Then we disconnected all
> the electronic systems by pulling the power plugs out of the wall. We
> had jumper cables connecting all the incoming phone lines. We
> disconnected them.
>
> We also used semiconductor devices know as TRANSORBS and gas discharge
> protection devices on all the power lines in the building.
>
> At Mt Lemmon the telescope was in a low building. We installed a 200
> foot crankup tower near the telescope. There is what is known as "THE
> CONE OF PROTECTION". We knew we were going to get lightning hits so we
> tried to control where they were.
>
> Lightning is totally unpredictable other than the mountain tops will
> get hit.
>
> Bob Macklin
> K5MYJ
> Seattle, Wa.
> "Real Radios Glow In The Dark"
>
> ----- Original Message -----
>
> *From:*Doug Reid n1068d@... [4sqrp]
> <mailto:n1068d@...%20[4sqrp]>
>
> *To:*4sqrp@... <mailto:4sqrp@...> ; Paul
> Smith <mailto:psmith61@...>
>
> *Sent:*Wednesday, June 21, 2017 8:56 AM
>
> *Subject:*Re: [4sqrp] 4SQRP 40 meter net
>
> Hi Paul !
>
> I wish I could get on the 40m net tonight, but I took a direct hit
> in a lightning storm a few nights ago. It burned up my unun,
> coax, and blew the coax out of its PL259 on back of the tuner. My
> rig was disconnected, as always, but it also wrecked the wiring in
> my test bench.
>
> Good luck this evening.
>
> WD4LNW Doug Reid, Thomasville, NC SKCC 11969T
>
> On Wednesday, June 21, 2017 9:27 AM, "Paul Smith psmith61@...
> [4sqrp]" <4sqrp@...> wrote:
>
> Hello All,
>
> Wayne will not be able to call the 40 meter net tonight. I will
> give it a go for him. My old note stuck up here says 730 local. Is
> that correct? If not please let me know. If there any SKCC
> Centurians, Tribunes or Senators out there let fly your number. I
> am only 6 out from having my Tribune.
>
> CU tonight on 7122 we can go later if it would work better. let me
> know de Paul N0NBD
>
> Sent from Outlook <http://aka.ms/weboutlook>
>
>

--
Cecil - k5nwa http://thepartsplace.k5nwa.com/


Re: 4SQRP 40 meter net [1 Attachment]

Cecil Bayona <cecil.bayona@...>
 

I've always heard the opposite, encourage lightning to flow elsewhere,
since lightning jumps through miles of air an excellent insulator there
is not much you can go to stop it except to make somewhere else more
attractive hence lightning rods.


On 6/21/2017 3:41 PM, ronhogrider92@gmail.com [4sqrp] wrote:

I always tell people NOT to provide a path for lightning to flow.

Your posting supports that, thank you Bob.

Ron wb1hga

BTW:

I won’t be on tonight as I hoped. I run a

Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
Windows 10

*From: *Bob Macklin macklinbob@msn.com [4sqrp]
<mailto:4sqrp@yahoogroups.com>
*Sent: *Wednesday, June 21, 2017 2:22 PM
*To: *4sqrp@yahoogroups.com <mailto:4sqrp@yahoogroups.com>; Doug Reid
<mailto:n1068d@yahoo.com>
*Subject: *Re: [4sqrp] 4SQRP 40 meter net

In the 1980's I worked at the University of Arizona in Tucson. I
worked on telescopes on Kitt Peak and Mt. Lemmon.

Lightning was a major problem. If you Google Kitt Peak (KPNO) you can
see photos of the lightning.

I received funding from the National Science Foundation and NASA to
find solutions to the lightning problem.

We found the best solution was disconnect the incoming power INCLUDING
THE GROUND at the entrance to the buildings. Then we disconnected all
the electronic systems by pulling the power plugs out of the wall. We
had jumper cables connecting all the incoming phone lines. We
disconnected them.

We also used semiconductor devices know as TRANSORBS and gas discharge
protection devices on all the power lines in the building.

At Mt Lemmon the telescope was in a low building. We installed a 200
foot crankup tower near the telescope. There is what is known as "THE
CONE OF PROTECTION". We knew we were going to get lightning hits so we
tried to control where they were.

Lightning is totally unpredictable other than the mountain tops will
get hit.

Bob Macklin
K5MYJ
Seattle, Wa.
"Real Radios Glow In The Dark"

----- Original Message -----

*From:*Doug Reid n1068d@yahoo.com [4sqrp]
<mailto:n1068d@yahoo.com%20[4sqrp]>

*To:*4sqrp@yahoogroups.com <mailto:4sqrp@yahoogroups.com> ; Paul
Smith <mailto:psmith61@cox.net>

*Sent:*Wednesday, June 21, 2017 8:56 AM

*Subject:*Re: [4sqrp] 4SQRP 40 meter net

Hi Paul !

I wish I could get on the 40m net tonight, but I took a direct hit
in a lightning storm a few nights ago. It burned up my unun,
coax, and blew the coax out of its PL259 on back of the tuner. My
rig was disconnected, as always, but it also wrecked the wiring in
my test bench.

Good luck this evening.

WD4LNW Doug Reid, Thomasville, NC SKCC 11969T

On Wednesday, June 21, 2017 9:27 AM, "Paul Smith psmith61@cox.net
[4sqrp]" <4sqrp@yahoogroups.com> wrote:

Hello All,

Wayne will not be able to call the 40 meter net tonight. I will
give it a go for him. My old note stuck up here says 730 local. Is
that correct? If not please let me know. If there any SKCC
Centurians, Tribunes or Senators out there let fly your number. I
am only 6 out from having my Tribune.

CU tonight on 7122 we can go later if it would work better. let me
know de Paul N0NBD

Sent from Outlook <http://aka.ms/weboutlook>

--
Cecil - k5nwa http://thepartsplace.k5nwa.com/


Re: 4SQRP 40 meter net

ronhogrider92@...
 

I always tell people NOT to provide a path for lightning to flow.

Your posting supports that, thank you Bob.

 

Ron wb1hga

 

BTW:

I won’t be on tonight as I hoped. I run a

 

Sent from Mail for Windows 10

 

From: Bob Macklin macklinbob@... [4sqrp]
Sent: Wednesday, June 21, 2017 2:22 PM
To: 4sqrp@...; Doug Reid
Subject: Re: [4sqrp] 4SQRP 40 meter net

 

 

In the 1980's I worked at the University of Arizona in Tucson. I worked on telescopes on Kitt Peak and Mt. Lemmon.

 

Lightning was a major problem. If you Google Kitt Peak (KPNO) you can see photos of the lightning.

 

I received funding from the National Science Foundation and NASA to find solutions to the lightning problem.

 

We found the best solution was disconnect the incoming power INCLUDING THE GROUND at the entrance to the buildings. Then we disconnected all the electronic systems by pulling the power plugs out of the wall. We had jumper cables connecting all the incoming phone lines. We disconnected them.

 

We also used semiconductor devices know as TRANSORBS and gas discharge protection devices on all the power lines in the building.

 

At Mt Lemmon the telescope was in a low building. We installed a 200 foot crankup tower near the telescope. There is what is known as "THE CONE OF PROTECTION". We knew we were going to get lightning hits so we tried to control where they were.

 

Lightning is totally unpredictable other than the mountain tops will get hit.

 

Bob Macklin
K5MYJ
Seattle, Wa.
"Real Radios Glow In The Dark"

----- Original Message -----

Sent: Wednesday, June 21, 2017 8:56 AM

Subject: Re: [4sqrp] 4SQRP 40 meter net

 

 

Hi Paul !

 

I wish I could get on the 40m net tonight, but I took a direct hit in a lightning storm a few nights ago.  It burned up my unun, coax, and blew the coax out of its PL259 on back of the tuner.  My rig was disconnected, as always, but it also wrecked the wiring in my test bench. 

 

Good luck this evening.

 

WD4LNW  Doug Reid, Thomasville, NC SKCC 11969T

 

On Wednesday, June 21, 2017 9:27 AM, "Paul Smith psmith61@... [4sqrp]" <4sqrp@...> wrote:

 

 

Hello All,

Wayne will not be able to call the 40 meter net tonight. I will give it a go for him. My old note stuck up here says 730 local. Is that correct? If not please let me know. If there any SKCC Centurians, Tribunes or Senators out there let fly your number. I am only 6 out from having my Tribune.

CU tonight on 7122 we can go later if it would work better. let me know de Paul N0NBD 

 

Sent from Outlook

 

 


Re: 4SQRP 40 meter net

Bob Macklin <macklinbob@...>
 

In the 1980's I worked at the University of Arizona in Tucson. I worked on telescopes on Kitt Peak and Mt. Lemmon.
 
Lightning was a major problem. If you Google Kitt Peak (KPNO) you can see photos of the lightning.
 
I received funding from the National Science Foundation and NASA to find solutions to the lightning problem.
 
We found the best solution was disconnect the incoming power INCLUDING THE GROUND at the entrance to the buildings. Then we disconnected all the electronic systems by pulling the power plugs out of the wall. We had jumper cables connecting all the incoming phone lines. We disconnected them.
 
We also used semiconductor devices know as TRANSORBS and gas discharge protection devices on all the power lines in the building.
 
At Mt Lemmon the telescope was in a low building. We installed a 200 foot crankup tower near the telescope. There is what is known as "THE CONE OF PROTECTION". We knew we were going to get lightning hits so we tried to control where they were.
 
Lightning is totally unpredictable other than the mountain tops will get hit.
 
Bob Macklin
K5MYJ
Seattle, Wa.
"Real Radios Glow In The Dark"

----- Original Message -----
Sent: Wednesday, June 21, 2017 8:56 AM
Subject: Re: [4sqrp] 4SQRP 40 meter net

 

Hi Paul !

I wish I could get on the 40m net tonight, but I took a direct hit in a lightning storm a few nights ago.  It burned up my unun, coax, and blew the coax out of its PL259 on back of the tuner.  My rig was disconnected, as always, but it also wrecked the wiring in my test bench. 

Good luck this evening.

WD4LNW  Doug Reid, Thomasville, NC SKCC 11969T


On Wednesday, June 21, 2017 9:27 AM, "Paul Smith psmith61@... [4sqrp]" <4sqrp@...> wrote:


 
Hello All,
Wayne will not be able to call the 40 meter net tonight. I will give it a go for him. My old note stuck up here says 730 local. Is that correct? If not please let me know. If there any SKCC Centurians, Tribunes or Senators out there let fly your number. I am only 6 out from having my Tribune.
CU tonight on 7122 we can go later if it would work better. let me know de Paul N0NBD 

Sent from Outlook



Re: 4SQRP 40 meter net

Johnny AC0BQ
 

I will have a listen for you Paul.
I just happen to have a SKCC T number as well!
72
Johnny AC0BQ 


On Wed, Jun 21, 2017 at 8:26 AM Paul Smith psmith61@... [4sqrp] <4sqrp@...> wrote:
 

Hello All,

Wayne will not be able to call the 40 meter net tonight. I will give it a go for him. My old note stuck up here says 730 local. Is that correct? If not please let me know. If there any SKCC Centurians, Tribunes or Senators out there let fly your number. I am only 6 out from having my Tribune.

CU tonight on 7122 we can go later if it would work better. let me know de Paul N0NBD 


Sent from Outlook

--
Check out the 4SQRP website at 4sqrp.com


Re: 4SQRP 40 meter net

Doug Reid
 

Hi Paul !

I wish I could get on the 40m net tonight, but I took a direct hit in a lightning storm a few nights ago.  It burned up my unun, coax, and blew the coax out of its PL259 on back of the tuner.  My rig was disconnected, as always, but it also wrecked the wiring in my test bench. 

Good luck this evening.

WD4LNW  Doug Reid, Thomasville, NC SKCC 11969T


On Wednesday, June 21, 2017 9:27 AM, "Paul Smith psmith61@... [4sqrp]" <4sqrp@...> wrote:


 
Hello All,
Wayne will not be able to call the 40 meter net tonight. I will give it a go for him. My old note stuck up here says 730 local. Is that correct? If not please let me know. If there any SKCC Centurians, Tribunes or Senators out there let fly your number. I am only 6 out from having my Tribune.
CU tonight on 7122 we can go later if it would work better. let me know de Paul N0NBD 

Sent from Outlook



Re: 4SQRP 40 meter net

Paul Smith
 

Thanks Wayne for the time statement. I will try again at 0100 and 0130 if nothing is heard at 0030. I have been getting some SKCC contacts at 9-10 CDT but earlier has just been noise here. I will give it a go. Thanks Wayne.

de Paul N0NBD


Sent from Outlook




From: 4sqrp@... <4sqrp@...> on behalf of Wayne Dillon wayne.dillon@... [4sqrp] <4sqrp@...>
Sent: Wednesday, June 21, 2017 1:47 PM
To: 4sqrp@...; John Cronhelm
Subject: Re: [4sqrp] 4SQRP 40 meter net
 
 

Hi all,
That would be 00:30z. Thanks Paul, much appreciated,
Wayne - NQ0RP

On Wed, Jun 21, 2017 at 8:45 AM, John Cronhelm johncronhelm@... [4sqrp] <4sqrp@...> wrote:
 

Hi Paul,
What time Zulu is the sched. tonight
John vo1jcc.

Sent from my iPad

On Jun 21, 2017, at 10:56 AM, Paul Smith psmith61@... [4sqrp] <4sqrp@...> wrote:

 

Hello All,

Wayne will not be able to call the 40 meter net tonight. I will give it a go for him. My old note stuck up here says 730 local. Is that correct? If not please let me know. If there any SKCC Centurians, Tribunes or Senators out there let fly your number. I am only 6 out from having my Tribune.

CU tonight on 7122 we can go later if it would work better. let me know de Paul N0NBD 


Sent from Outlook




--
 
QRP -  EFFICIENCY AND SKILL, NOT POWER. 
 
I'm British by birth but American by CHOICE!

Jesus came to pay a debt He didn't owe because we owe a debt we cannot pay...

The Lord bless you and keep you
The Lord make His face shine upon you, and be gracious unto you
The Lord lift up his contenance upon you and give you peace.

God Bless from Wayne Dillon - NQ0RP

Joshua 24:14-15
2 Cor 5:17
1 Jn 2:17
 
NAQCC MWN NCS
NAQCC Net manager
NAQCC # 0759
Membership Chairman - 4SQRP Group
4SQRP 40m NCS
4SQRP #95
FISTS 17184
FPQRP #342 (Flying Pigs QRP Club)
G-QRP-11504
QRP-ARCI #11505
SKCC #1155T
SOC #848
30MDG#1176
NEQRP #693
GORC #192
DMC (Digital Modes Club) # 06686
Zombie# 1186


Re: 4SQRP 40 meter net

Wayne Dillon
 

Hi all,
That would be 00:30z. Thanks Paul, much appreciated,
Wayne - NQ0RP

On Wed, Jun 21, 2017 at 8:45 AM, John Cronhelm johncronhelm@... [4sqrp] <4sqrp@...> wrote:
 

Hi Paul,
What time Zulu is the sched. tonight
John vo1jcc.

Sent from my iPad

On Jun 21, 2017, at 10:56 AM, Paul Smith psmith61@... [4sqrp] <4sqrp@...> wrote:

 

Hello All,

Wayne will not be able to call the 40 meter net tonight. I will give it a go for him. My old note stuck up here says 730 local. Is that correct? If not please let me know. If there any SKCC Centurians, Tribunes or Senators out there let fly your number. I am only 6 out from having my Tribune.

CU tonight on 7122 we can go later if it would work better. let me know de Paul N0NBD 


Sent from Outlook




--
 
QRP -  EFFICIENCY AND SKILL, NOT POWER. 
 
I'm British by birth but American by CHOICE!

Jesus came to pay a debt He didn't owe because we owe a debt we cannot pay...

The Lord bless you and keep you
The Lord make His face shine upon you, and be gracious unto you
The Lord lift up his contenance upon you and give you peace.

God Bless from Wayne Dillon - NQ0RP

Joshua 24:14-15
2 Cor 5:17
1 Jn 2:17
 
NAQCC MWN NCS
NAQCC Net manager
NAQCC # 0759
Membership Chairman - 4SQRP Group
4SQRP 40m NCS
4SQRP #95
FISTS 17184
FPQRP #342 (Flying Pigs QRP Club)
G-QRP-11504
QRP-ARCI #11505
SKCC #1155T
SOC #848
30MDG#1176
NEQRP #693
GORC #192
DMC (Digital Modes Club) # 06686
Zombie# 1186


Re: 4SQRP 40 meter net

JOHN CRONHELM
 

Hi Paul,
What time Zulu is the sched. tonight
John vo1jcc.

Sent from my iPad

On Jun 21, 2017, at 10:56 AM, Paul Smith psmith61@... [4sqrp] <4sqrp@...> wrote:

 

Hello All,

Wayne will not be able to call the 40 meter net tonight. I will give it a go for him. My old note stuck up here says 730 local. Is that correct? If not please let me know. If there any SKCC Centurians, Tribunes or Senators out there let fly your number. I am only 6 out from having my Tribune.

CU tonight on 7122 we can go later if it would work better. let me know de Paul N0NBD 


Sent from Outlook


4SQRP 40 meter net

Paul Smith
 

Hello All,

Wayne will not be able to call the 40 meter net tonight. I will give it a go for him. My old note stuck up here says 730 local. Is that correct? If not please let me know. If there any SKCC Centurians, Tribunes or Senators out there let fly your number. I am only 6 out from having my Tribune.

CU tonight on 7122 we can go later if it would work better. let me know de Paul N0NBD 


Sent from Outlook


Happy 1st Day of Summer!

Larry Makoski
 

Happy 1st Day of Summer! And as in the past six years, Skeeter Numbers are being issued for the 2017 NJQRP Skeeter Hunt.  This fun Summer time sprint will be held on Sunday, August 20th.  But don't wait until the last minute to get YOUR Skeeter number. Send an e-mail to w2lj@... along with your name, call sign and the state you'll be operating from, and a Skeeter number will be e-mailed back to you.


Need to know what all the buzz is about? See www.qsl.net/w2lj for all the high flying details.


72 de Larry W2LJ



Re: The Cricket Transceiver Futuristic Design

Wayne Steury
 

Good morning.  Through the comments of several I made some modifications to my Cricket.  I changed C9 to 180p and C10 to 470p.  Then I paralleled R1 with another 100K making 50K and paralleled R2 with a 1K to make .6K

It works with all crystals from KC9ON but lower power.  The best was my 3550 crystal that gives me about 400 Milliwatts. Using my old 3579 I now seem to get 1 watt on my MFJ-971 tuner.  I made a solid qso with someone last night. I was excited that it worked on 3550.  It shows about the same db on reverse beacon.

I am sure interested in technical comments. Nothing seems to get hot with my regular CW and K1EL keyer.

73's Wayne  N9EGT  Berne, IN  See me on QRZ.com




On 5/27/2017 1:22 AM, jwc123@... [4sqrp] wrote:
 

>Does the oscillator run ok with an HC49S, and with 180p at C9 and470 at C10?  Does it start ok both at 3580 and 3560? 
So far it's working with 3535 3550 3560 and 3579 - all HC49/s small cases, have not seen any startup issues.  Putting the 2 pin headers in those cap positions really helped out.

>How much power does it make with the small crystal? 
Power is much lower, about slightly less than 1/2W.  Currently using an MFJ949 for measurement but really need to swap it out with my Autek meter as the MFJ accuracy is horrid in the low range.

>Does Q2 get hot?
I will leave that with a "it all depends".  If you do about 60 seconds of normal keying at 10WPM, such as calling CQ, I have not felt any heat. Probably the duty cycle is enough to keep it cool.  But if you drop your shoe on the key it starts to get hot to the touch after about 10 seconds into a dummy load. I haven't left my shoe on the key any longer than that but would assume by 30 seconds full key down magic smoke will appear.

>Does it stay in Class E?
Probably not (see above).  Someone told me of a mod to one of the bias resistors around Q2.  I have not tried this mod yet and don't know if it's better or worse.  I'm off the bench for  summer activities so it may be a while before I starting playing around again.

Another thing I have not done yet is to measure the signal sensitivity. 

Overall it's an interesting, but challenging, circuit.  I know the manual states it was a minimalist design and built for a specific purpose but us hackers will be hackers :)


For the headers/sockets........
I don't plan on re-selling them as they are very cheap (penny candy).  However, when someone asks I do drop a few samples in an order when I have extras (usually do).  I get them from TaydaElectronics.com  Their shipping costs are pretty reasonable as well.  I think they are also on Ebay as Tayda2009.   Below are the part numbers:

40 pin breakway header A-197 $.15 - One is enough for 13 crystals.
3 pin straight female header A-1069 $.04
3 pin Right Angle female header A-1028 $.09
(A header and 10 sockets comes out to around $2.07 shipped from them - hard to beat!)

The clear Mini-Yack enclosure was a gift from VE3FWF.  He does not produce them commercially but his local library is lucky enough to have a laser cutter he has occasional access to.  He has also done ones for the Chinese Pixie and Super RM Rockmite.  The software is from www.makercase.com and his current enclosures are available from several places on my web site but here is a direct link to the zip file:   http://kc9on.com/wp-content/uploads/2016/04/VE3FWF-Enclosures.zip

If anyone is interested I have a Super RM Rockmite enclosure made from hardboard I promised to give away and will send to the first U.S. person to e-mail me off list (Foreign shipping starts at a whopping $9.50 and up.... Ouch!).  You can see a picture of the hardboard version here: http://kc9on.com/ham-radio/qrp-radios/chinese-qrp-kits-2/chinese-super-rm-rockmite-aka-octopus/

72 John kc9on





Tradin' stock

Ed Meyer, WG5F
 

I've got a DigiDesigns Mbox 2 Mini recording, editing, and mixing system.  

You can see a pretty good description of it on Amazon: https://www.amazon.com/Digidesign-Portable-USB-Powered-Tools-Workstation/dp/B000KW4TZK

I'd like to trade it.

Whadya got?

72,

-Ed, WG5F-

Tulsa, OK

(918) 232-5194 Cell/text

 


ROCKs & ROLL.....your own!

Rex Harper
 

Gangue,

Since my very first field trip in 9th grade Earth Science class where we visited a quarry and I picked up a beautiful piece of crystal clear quartz, I've been fascinated with rocks....and fossils! Quartz and galena crystals have always been my favorites primarily because I was also into electronics and knew their hidden powers. To others, they were just rocks but to me they were the tools for communication. I never got to play with quartz but I did build a few crystal radios using galena crystals purchased from rock shops. It took a trip to Ozarkcon before I could actually find my own galena crystals... Enough history.

We had another successful Buildathon at FDIM...with the usual glitches here and there. We had about 40 builders in the session and I believe everyone left the room with a working kit. This year's build was an integrated Crystal Oscillator & Frequency Counter combo specifically designed to aid in grinding FT-243 crystals. I managed to wipe out my work-in-progress frequency code in the middle of the night and couldn't get it back in shape. I did have a beta kit working great so we ended up borrowing the micro chip in that to verify everyone's completed kit so that went fairly well. I had to spend a couple of weeks back home reviving the program and getting the remaining kinks out of it. I also taped a few videos to explain the kit build, calibration, mods etc. All the information about the kit is now up on my website. Everybody has received their care package now so I can start selling them off my website.

In my Miscellaneous Parts department, there are listings for the other FT-243 items that I offer. Notably, I managed to talk a crystal supplier to make me some FT-243 quartz blanks! I now have factory fresh FT-243 blanks cut for 7015 and ready to grind up into more QRP friendly areas of the 40m band. If you need a REAL FT-243 crystal or socket for a REAL spy or vintage radio, I got 'em... and the means to move 'em!

Crystal Oscillator/Frequency Counter kit:  http://qrpme.com/?p=product&id=Q17

Rocks & Sockets: http://qrpme.com/?p=parts


Rex  W1REX

10481 - 10500 of 25271