Hello folks: Testing to see if I have the correct configuration in my email program. Don, I wish to thank you for your many years of dedicated service to the 4SQRP community! The reflector has been

Can anyone provide me with the voltage levels @ each of the two active devices leads? In the stand-by mode. tnx & 73's steve/k4mmg

Greetings all, Just checking to make sure I have successfully joined the group. Don, I sent you an email. 72/73, Gary/W5REJ Edmond, OK

AE5K took everyone off digest mode for the announcement he sent out last night. The group is in the process of moving to Yahoo groups. Jeremy, N9PH

Hi Julius, I feel for you and understand your concern. If you have already signed up for the 4sqrp reflector on yahoo groups, then send me a private email (donj@...) and I'll remove you from the

Great news Terry. Really looking forward to OzarkCon. Always a wonderful time and wonderful experience. Even with the wonderful attendance the event has, it is great that Stone Castle is large

by "Active Devices" do you mean the transistors? I can measure that for you when I get home, if no one else answers. 73 Scott -- FP #930 / Pig Rig #118 (unbuilt) SKCC #3083 4SQRP #558 OMISS #5084

Just checking to make sure I make the move okay. Tnx 72

Scott Yes, I mean the mosfets. I appreciate ur help! 73's steve/k4mmg

Jezus, 50 turns of wire on a plastic tube, amazing. I've been messing with wires all my life Roy but at least they were hanging outdoors!! -- Gust Kegelaers ON6KE If there's life after death I hope

Heh, When I moved to this QTH a while back I put up some speaker wire in a horizontal loop inside my attached garage. It's about nine and a half feet above the floor and goes all the way around where

Looking at the component side, pins from left to right: Q1: 1.8V, 13.8V, 1.8V Q2: 13.8V, 2.78V, 1.8V Hope that helps. 73 Scott -- FP #930 / Pig Rig #118 (unbuilt) SKCC #3083 4SQRP #558 OMISS #5084

Scott Tnx, ur info helps. I guess I blew mine some how when I changed the xtal. Do u know if anyone has mounted the NS-40 in an Aluminum enclosure? tnx steve/k4mmg

I do not know. I did read somewhere that care should be taken when mounting it because you don't want anything messing with the etched coils. There's an NS-40 email group you can join by sending an

In regards to the move to 4sqrp@..., change may not always be good, but it is inevitable. In most cases even if it is not successful, something good will come out of it. As we get older, it

Hi Gary! Hope all is well with you. We're doing great here in the "frozen wasteland of the north" ha ha. I'm still following the 4SQRP group, lots of good stuff there. I wish I could make it to

Testing to see if request to join was successful. 73 John/W5CYF

Sorry for not paying attention to the "To:" line. Will have to get used to the yahoo protocol. 72, Sam, AL7V

Made the change and I have owned and used Yahoo groups for years and don't have even one horror story to share . I like the ability to be able to post photos . THANKS DON !! Charlie , W5COV LowFER

Don, Let me add my thanks to you for your years of dedicated service to the club!! Like others, Yahoo has served me for years with nary a problem and I look forward to the list being on