Larry - can you send me e-brochures on both. Best - John w4usf

Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 16 October 2019, 8:00pm to 9:00pm, (GMT-05:00) America/Chicago Where:40 and 80 Meters View Event Organizer:

Jay, I sent 2 emails to the HELP address in the FAQ, and nothing. That was 2 1/2 months and 1 month ago. I'm done trying. Paul Goemans WA9PWP Stoughton, WI

Hello Paul, QRP-L is still alive and well.  It sounds like you have done what you need to do. FYI This information appears at the bottom of QRP-L mail: QRP-LHome:

I have a Hilltopper 20 that I want to sale. It looks great and is in good working condition. I am asking $95 for it shipped. If you are interested please email me at kb4qnr@.... I will ship anywhere

Hello, Is anyone here also subscribed to the QRP-L list reflector on mailman.qth.net? I had been a member for decades, but unsubscribed over a year ago when there was more “noise” than

I have a few of my small model SSP paddles available for sale. These are great for SOTA and portable ops. If you think you may be interested contact me OFF LIST at: n0sa@... I will send you an

Well, the October Second Sunday Sprint results are in.  Carl, WB0CFF, reclaimed 1st place for the year, now surpassing Chas, W2SH, by 9 QSO points.  Carl has 142 points and Chas has 133.  Besides

thank you, Dennis, I have one other question and that is I was sent a module and I built it and installed it but the reception is still bad it sounds like it is out of frequency I know on my big rig

The kit comes with 12 inches of 22 AWG stranded and 6 feet of 22 AWG magnet wire, per the bill of materials.

This is cross-posted in a few IO groups, just FYI. I have a virgin Wilderness 40A Rev C and want to start sea trials with another 40A. Whether it is a qrp-tech 40A, a Norcal version, or a Wilderness

Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 16 October 2019, 8:00pm to 9:00pm, (GMT-05:00) America/Chicago Where:40 and 80 Meters View Event Organizer:

Hi I have one more question to ask and that is what gauge wire is used for the toroids T50-2 and T50-6. Kit Nouveau 75, is it #22 gauge magnet wire? thanks, terry

should I rewind them

It should be flatter than this, but given the tolerance errors that can creep in to hand-wound toroids, it's probably not too abnormal.

Hi, joe I haverecently built the nouveau 75 and I have installed the new board you sent me.it seems like it needs a fine tune adjustment but that's what I am writingabout it's that when I use the

Hi Terry, I don't know anything about this kit or its adjustments. I was not the one who sent you the board. I think you need to contact Dave Cripe, NM0S who is the designer of the nouveau 75. Wish

This is a 75M transceiver. You should not be transmitting at 8 or 9 MHz. 73 Dave NM0S

Hi, joe I have recently built the nouveau 75 and I have installed the new board you sent me. it seems like it needs a fine tune adjustment but that's what I am writing about it's that when I use the

I was waiting for David or someone to reply but I can confirm that the silk-screen is incorrect.   If you look at page 5 of the assembly manual presently on the website it now says that the flat