q 11 HOT ON REC q 12 COOL ON REC q 11 GATE 7.8 V q 12 GATE 12.7 -----------------------------------------From: "K4ENC" To: "main@4SQRP.groups.io" Cc: Sent: Monday August 12 2019

I noted in the manual L-2 shows 17T and L-4 18T. The schematic shows L-2 16T and L-4 16T. Which one is correct? Thanks! Bill -- 73 Bill W0PT

It sold quick -- The SARK-110 analyzer has been SOLD and shipping in a few minutes. Jim, W0EB

Thanks for the interest, this has been SOLD. W0EB

If there is heating in Q11 during receive, that suggests there may be leakage in Q12. Is it getting warm as well? Check the gate voltages of both Q11 and Q12 during receive, and make sure they are

The former low cost Visor Magnifier that I notified everyone about previously is now available from American Science & Surplus for the low cost of $7.95 each. I bought one for my grandson and then

The voltage across R39 (10K) should be 0V in receive. You also want to verify the resistance to ground there (w/ power removed) in case there's a short somewhere. - Dave, K1SWL

Looking some volt reading around Q11 and D 6……………….Q11 running very hot in rec. Bob Sent from Mail for Windows 10

Folks: I am extremely busy this month.  It would help immensely if I could tabulate the scores by tomorrow (Tuesday) morning.  So please submit your SSS score by the end of today. Thanks and

IT STARTS HEATING UP AS SOON AS U FLIP THE SW.....DIDNT NOTICE IT WITH THE FIRST CONTACE RIGHT OFF...TO EXCITED THAT IT WAS WORKING??

4SQRP Second Sunday Sprint When: Sunday, 11 August 2019 7:00pm to 9:00pm (GMT-05:00) America/Chicago Organizer: John Lonigro Description: 4SQRP Second Sunday Sprint. See

Hey Author Did you sell everything? Chuck kf6fju Powered by Cricket Wireless.

Care less about GA but need some help with my nouveau 75 and don't know if this is the right place to ask for help??radio works been told sounds great rx tx not tracking but the biggie id q11

Got the info and corrected my build but now have a heat problem with q 11 in rec. made a contact with it and told it sounds great...any suggestions on the heat issue

Reminder: 4SQRP Second Sunday Sprint When: Sunday, 11 August 2019, 7:00pm to 9:00pm, (GMT-05:00) America/Chicago View Event Organizer: John Lonigro Description: 4SQRP Second Sunday

We have gone back to the RV lifestyle and space is limited so I have to pass on some of my goodies. All prices are "O B O" and shipping is not included, all items are in very good shape except #1, and

The resonators are indeed blue. The resonators can have 2 or 3 leads. The 2 lead version uses the outside holes only. The leads and holes align well. If it fits "nicely" it is correct. 73, Joe

Gene Autry's Radio Ranch show is at the Base of David Cripe NM0S Murania Am radio kit that 4SQRP sells. Paul Sent from Outlook

The ceramic resonators x1, x2 and x3 are blue and have two leads;;; There are 3 holes in the circuit board for soldering each of these components... Which 2 of the 3 holes in each respective location

Where does the CLK1 on the synthesizer chip go to? Can't find it on the schematic. Thanks. Virus-free. www.avast.com