Are you'se guys still on Daylight time there in Chicago? "... 8:00 pm DST central time on 7.122 ..." -- 73, Joe Cotton, W3TTT

Dave's response to the same question asked in an earlier email. "1. The main PCB transistor Q2 must be installed with its large flat face oriented toward the RIGHT side of the

Gm all This question came in on the club inquiry email. I’m not sure about the answer so I’m reposting it here? Any ideas guys? Thanks 72 Johnny AC0BQ ---------- Forwarded message ------

Hi Jim, I too went into the Army after a year of college My draft number was low so signed up to be an ASA fighter up in Devens. Went to electronics training right out of Basic and became an Intercept

One common issue with the Murania is overcoupling between the main coil and the coupling loop. If the circuit is oscillating, that voltage will push the AGC down, reducing the circuit gain. Try

I have fond memories of those old heavy copper soldering irons. The first radio I ever repaired (I was around 11 years old) was done with one of those irons heated on the kitchen stove! The radio

We used these old school irons in little gas ovens to heat them in junior high. I hated using those for soldering sheet metal projects, but eventually got the hang of it. Here's to Mr Roy Vercruysse

I have used my propane torch. On long wire runs. Have to be careful with the heat but it did work. Also in the summer have driven my tractor over and used the inverter to drive my weller gun. Most

I have the Weller Portasol PSI100K Pro and love it. Works out in the cold damp or wet for antenna installation. Couldn’t live without it. Worth every penny. Dave K8WPE since 1960 David J. Wilcox

Hi, I've tested with the 807 single CW Xmtr into a MagicBox(MB). It's power out is 12W(max) at Vp=350V into a dummy load. I put the Xmtr into my MB and saw its power out into a dummy load. The power

Hello Dave how much would shipping be? SC or DX? I really want this RX to practivce learning CW. Am having issues getting paid - working part-time in Vietnam ATM. Mmm, how about $ 35? 73, Chris am

Where did connect your Freq-mite in the Ozark Patrol? I've been planning to put one in mine, but haven't done it yet. Thanks, AI4EE.

Sure hate to see the Freq-mite disappear, I've used it in several rigs in place of a display, the first being a KW-7 and the last being an Ozark Patrol. Handy little circuit. Tom W9KKQ

Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 13 November 2019, 8:00pm to 9:00pm, (GMT-06:00) America/Chicago Where:40 and 80 Meters View Event Organizer:

That is neat Bob! Never knew they made those. .. How long do the tips last? Dwayne Ka0aam

Many TNX DOC Classic info. Enjoy everyone. 73, Larry ns4q ..

RS is still in business, not sure if this is the same “iron” or not, they are out of stock online but you can check your closest Hobby Town for one. If there isn’t one near you perhaps a caring

Agreed. It can be discouraging and give the impression of elitism. 73, Ed - ad7gr -- Joh173

My wife bought a butane torch to use in baking from Bed Bath and Beyond its real small, but works nice and uses a can to refuel. Tom KA3GGI

A bunch of us picked up 12 volt irons like this via eBay sellers: https://www.ebay.com/itm/12V-DC-60W-Car-Auto-Crocodile-Battery-Clip-Powered-Electric-Soldering-Iron-WP/372745384868 I put on