High tech wearable 80m SSB QRP rig??? De NY0J

Hi QRPers, Can someone explain to me why the hearing aids I have put out a carrier at 3.84 MHz -40 dBua/m at 10 meters These tiny things have 2 transceivers built in. The other one is 2.4 GIG 4 dBm

Here is an update on our Field Day plans. We have four sites reserved at Weston Bend State Park in Weston MO, # 28, 29, 30, 31. Two adjacent and two across the drive The sites have power and RV

You're more than welcome. 72 Duane Sent from TypeApp

Success in removing part, tweezers and iron removed wires. Thanks.

A fine radio, HAPPY New Year Johnny. Dick, n0tgr-- What a great improvement, Yahoo just didn't work for me. Dick, n0tgr

Good evening group. The Muriana kits are back in stock And the web page order button will be Available soon. Thanks for your patience. 72 Happy New Year 🎉 Johnny AC0BQ -- Check out the 4SQRP

If you have a hot air station & hot tweezers, it's a breeze. If not, back to old school. Most important thing is to not damage the board and I've replaced hundreds of IC's under varying conditions as

I agree with John anyone can have that Oh no moment and when it does work it’s a great feeling. Nice thing about this group there is always somebody to help out. Glad to see more people wanting to

Definitely not alone, many times things haven’t gone right during 75 years of messing around. Big smiles when something works the first time, DIY if you can, might cost more in the end but you can

Thanks for letting me know I am not alone! This is my first attempt at building a kit. When/if successful can take my place among those who have gone before.

FS: QRP Power Book, 1996 edition, soft back, very good condition, $15 shipped book rate, Paypal ok, or any money order. Darryl, KK5IB, #784

I've also done it. Somehow I wasn't paying attention and got an IC installed backwards in a wattmeter kit. Removing the errant device is on top of my to do list, along with getting my Hilltoppers

There's a Youtube video on surface mount tech that details removing an IC with a process that should work on through hole as well. Check it out. Virus-free. www.avast.com

We have all done it if we have done any building at all, so don't feel bad. Sent from TypeApp

Thanks, and I was being so careful!!!

You have lost the mismounted semiconductor. Cut the leads with a flush sidecutter or xacto blade as close to the semiconductor as possible and tip it up or remove it. That should allow you to remove

There are two ways to increase your effective power output. 1. enlarge your antenna by lengthening it, or adding elements. 2. Purchasing a linear. Each time you double your power, you have a 3db

Previous wire antenna farm had loop for 160 roughly 560 feet. Competed with those running maximum power. Yes, I was happy. Now everything is scaled down to a 43 foot dipole wrapped around three sides

KC9ON.com has great crystals for about $1. John sent me a socket too. N9egt Wayne Steury IPhone