I need some assistance with my effort to change the center frequency to 750 Hz. I have new resister values, but would like to have them confirmed with LTSpice. I understand someone in the group

Thanks Chas. 72 WAØITPI love this radio stuff.www.wa0itp.comwww.4sqrp.com On 8/14/2019 9:12 PM, w2sh@... wrote:

THANKS TO ALL WHO CHECKED INTO THE NET, TONIGHT'S CHECK IN'S NK8O CHARLES N0MII JEFF WG5F ED N0SO MIKE N0TGR DICK KB0MOE DON AC0BQ JOHNNY K0VAB VIC AND I HEARD TERRY WAOITP, BUT COULD NOT

Terry, Perhaps your notes show the calling station was KB1PJ. I tried to chase him away by sending QRL. Later, I wanted to try my luck on 80m, but doggone it there was the same KB1PJ calling. Well

Ge Group Pretty good turn out tonight considering the band is pretty weak. Check In's were: KL7IXI MIKE WA0ITP TERRY N0YJ BERT N4KV JOHN and K0FHG BOB Tnx 72 cu all next week -- QRP....."More

I had to move to 7123 due to a station calling CQ, and then another station right at 8P. So checkins were scarce. Next week I'll begin calling at 7:55 to grab the frequency first,

Wednesday Evening 40 and 80 meter Nets When: Wednesday, 14 August 2019 8:00pm to 9:00pm (GMT-05:00) America/Chicago Where: 40 and 80 Meters Organizer: jomatlock@... Description: The 40 Meter Net

Ron - AG1P, No problem. As I stated before, "Everything in its own time". What got me interested in the first place was my intention to somehow "map" some of the 4SQRP group of regulars. Your "Members

Ray, No rusg OM. Everything in its own time. Let me know if/how I can contribute to the updating/maintenance of this very useful page. Very best to you, Don W6BOW San Francisco CA USA

The photos from the photo page show just the opposite arrangement of the screws for the heat sink. Gary K4VIG -- Gary K4VIG

Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 14 August 2019, 8:00pm to 9:00pm, (GMT-05:00) America/Chicago Where:40 and 80 Meters View Event Organizer:

Sorry, hadn't realized that it had been so long. I will look at getting you an updated location file. I will also look at possibility of triggering auto-update on new member add. Ray

Congratulations to Nick. We had to work harder than usual to complete the MN to TX QSO. Chas was strong on 40M and unheard on 20M here. The evening was frustrating fun. 72 Carl

GM Don, Sorry for the delay. Yesterday was long health-related visits day. You are correct. The map is static. The program that generates the map needs a file with GPS information to generate the

The manual is correct. I'll correct the schematic ASAP.

Regarding the observed Q11, Q10 heating, in normal operation these will exhibit no heating at all in the receive mode. What I suspect has happened is that Q11 and Q12 had shorted together with power

You are correct. I have not updated the map for some time. I'll see what I can do. Just in case someone else might like to undertake an update from time to time I will outline the

Good tip Jeff. The member list is alphabetized so you really don’t need to do a search at all, other than rapidly scrolling down the list and doing an old fashioned visual search. 72, John, AA0VE

Good reading Bruce. Dick, notgr-- What a great improvement, Yahoo just didn't work for me. Dick, n0tgr

One exception to Jim's tip below: if you're trying to search for a "0" (numeric zero) your browser search will fail. You'll need to substitute an "O" (letter O) instead of searching for a zero. What