Surplus to my needs (I now have a new Spectrum Analyzer and a SARK-110) is a really nice fully built and working Scalar Network Analyzer from Midnight Design Solutions (

Attendees that pre-register for Ozarkcon 2019 are getting in on the ground floor of a new adventure of recruiting new people to the thrill of building a project and having something "they built"

I am relieved to announce that a large number of hams figured out the time change on Sunday (hi).  Now if my body could figure it out!  There were 15 entries on the qrpcontest.com website and it

I met him once at Dayton, he was at the GQRP booth. I emailed him a time or two. Yes, he always would respond. -- Dan Reynolds -- KB9JLO <><

Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 13 March 2019 8:00pm to 9:00pm (GMT-05:00) America/Chicago Where: 40 and 80 Meters Organizer: jomatlock@... Description: The 40

"Ararat Shrine" Is this a group of Masonic Hams? Where is this going to be held? Bob KG5GTE > Pardon the public service announcement but it seems important and I > was given permission to post the

Pardon the public service announcement but it seems important and I was given permission to post the email to the 4SQRP Group. .......snipped from Larry's List....... Calling All Elmers! As you may

I'll bring a couple of extension cords and a couple of 6 outlet strips. Bob Groh, WA2CKY

no, I do not also pin o on the Si5351 should have around 1.86 volts has no voltage the rest of the pins fine

Terry- Jim Pruitt forwarded me your message mentioning no voltage on the ATmega328 pins 5 and 16. I gave him several suggestions, and I'm sure he'll send them to you. When you briefly press the

the Si5351 0 pin as no voltage it should be about 1.68 volts and I am not getting any audio any suggestions on fixing this. all the rest of the pins on the Si5351 are right. thank you

These are heavy, expensive, and need to be guyed, but I can replace my dipole ropes without leaving the ground or shooting a projectile at the neighbor's house. It was worth the peace of mind for

If you're participating in the Build-a-Thon, please bring an extension cord and/or power tap for your soldering iron or other electrical needs. I don't have nearly enough for 50

Don't know about the 40 ft pushup pole, but SOTA has a 32 ft lightweight pushup pole, https://www.sotabeams.co.uk/compact-light-weight-10-m-32-ft-mast/ also I found a shorter pole (mini) available in

What is your 40ft pushup pole...I am looking for something like that. Doc K5OSA

Rev George was the kind of person that if the church he pastored was close to me I would have considered changing and I have attended the same Wesleyan Church for 45 years. He was so approachable and

Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 13 March 2019 8:00pm to 9:00pm (GMT-05:00) America/Chicago Where: 40 and 80 Meters Organizer: jomatlock@... Description: The 40

Latest little project from the "Triumvirate Skonk Worx" (W0EB, W2CTX, N5IB) Just got the boards in and all the kit parts for this little adapter. It allows the DC input to be connected through an

Don't forget to send in your SSS  score, preferably by early tomorrow.  I plan to post the results either tomorrow night or Wednesday morning. I truly hope nobody missed the sprint due to the time

I made one of those just for chuckles too. Some day I may have to use it due to aging hands syndrome, now I'm using a J-38 SK and enjoy that. Also built a side swiper from QRPGuys in anticipation of