Pat's HT20 is done! Should be in the mail in the afternoon, gets a smoken 6.8-7W out. 73 -- David N8DAH Kit-Projects.com Shop now open!

Gang, Many thanks to Jim-WA7DUY, Dave-NM0S, and Dave-K1SWL for helping solve my Hilltopper 20 issues. (Mia Culpa Lesson: Make sure IC pins are unbent and mate solidly with receptacle. "For lack of a

Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 6 March 2019 8:00pm to 9:00pm (GMT-06:00) America/Chicago Where: 40 and 80 Meters Organizer: jomatlock@... Description: The 40

Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 6 March 2019 8:00pm to 9:00pm (GMT-06:00) America/Chicago Where: 40 and 80 Meters Organizer: jomatlock@... Description: The 40

Dave Many thanks for the input.  When my HT20 is tuned to 14060, I hear it on 14060 on every other radio I own.  When I key up the K2 on 14060....I get 14059.9 on the HT20...When I key up the K1 on

Hi Dave, indeed. I have a bunch of unbuilt kits peeking at me late at night from their storage box :o) 72 WAØITPI love this radio stuff.www.wa0itp.comwww.4sqrp.com On

Dave, GREAT! Thanks for this. I was powering up with CAL jumper in place...but not powering down between attempts. When I restart the CAL procedure, will I HEAR 60r0 still but see the freq has

Brian- OK- that's good. When you power up with the jumper already installed, you'll get 5 seconds of full power out. You can see the frequency displayed on a counter or hear the pitch on another rig.

Thanks Dave, I was installing the jumper....and then powering up. Will try it again tonight, and will make a note of each step. de KB9BVN -- 73 de KB9BVN Brian Murrey

Brian- If I read that right, are you adding the CAL jumper *after* power is applied? That doesn't work- the firmware looks for the jumper only at power-up. It should work properly if you install

I have a Hilltopper 20, and it's being odd. It powers up and gives me the 60r0 just fine. I transmit and it it's transmitting on 14062. So I followed the alignment procedure in the docs, moved the

Terry- What- if anything- does work? Morse readout on power up? If the Function switch polarity is OK (normally open), you might check this: Is power getting to the ATmega328? Pin 7 should be

Terry, That is what happens when “Old” hams stay up past 10 PM. Or inhaling too much solder smoke. Along with plugging in power supplies backwards and letting smoke out. I frequently purchase

I have on my very cluttered bench an extra EZKeyer III.  I have no idea how I wound up with it. It has a small diameter aluminum speed knob and is minus one rubber foot.  Sorta resembles the old

Check the push button switch to make sure it’s the right sex

Hilltoppers 40 not keying at startup nor keying at any other time any troubleshooting suggestions thanks

I was able to download it for you..... sometimes things just don't wotk. John KK4ITX Click Here for Zephyrhills Area Amateur Radio Club Many of life's failures are people who did not realize how close

Please see attached. ~Josh W0ODJ

Manual received, thanks! -- Tom Sevart N2UHC St. Paul, KS

Does anyone have a copy of the Murania assembly manual they can email me? The links on the 4SQRP Murania page don't seem to be working. -- Tom Sevart N2UHC St. Paul, KS