thanks fer your help

Glad to hear it is working de Paul Sent from Outlook

Everything is done bit the case. I am sitting in Columbia, Tn. listening to WSM 650 KCS in Nashville. Picked WSM up after sunset. I have the loop antenna wired with 27 turns. Read directions twice do

Paul N0NBD is going to try 80 meter NCS tonight. I’m still on the road. 73 Johnny AC0BQ -- Check out the 4SQRP website at 4sqrp.com

Wednesday Evening 40 and 80 meter Nets When: Wednesday, 25 July 2018 8:00pm to 9:00pm (GMT-05:00) America/Chicago Where: 40 and 80 Meters Description: The 40 Meter Net will be at 8:00 pm central

Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 25 July 2018 8:00pm to 9:00pm (GMT-05:00) America/Chicago Where: 40 and 80 Meters Description: The 40 Meter Net will be at 8:00 pm

No worries Dave, I found the 328P’s on ebay from an American seller with the Arduino R3 boot loader installed. I ordered 3, I think they were around $5.00 each + a few bucks shipping. I really

John- (still inhaling the first cup of coffee here) DigiKey also carries the bootloaded version. At least with them, searching on 'Arduino' ensures that you're getting the right version. To my

John: I know Jameco sells the ATMega328P both with and without the bootloader. I don't know if Mouser does or not. The one with the bootloader already burned in is a little more

Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 25 July 2018 8:00pm to 9:00pm (GMT-05:00) America/Chicago Where: 40 and 80 Meters Description: The 40 Meter Net will be at 8:00 pm

Good afternoon Dave, I have a question about the ATmega328P-PU micro available from Mouser. I would like to purchase another micro chip and load the latest version of the firmware using an Arduino uno

Sorry I’ll have to miss it this week. Out of town and my only radio is the Hilltopper 20. 72, Charles

Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 25 July 2018 8:00pm to 9:00pm (GMT-05:00) America/Chicago Where: 40 and 80 Meters Description: The 40 Meter Net will be at 8:00 pm

Check that D1 and D2 is installed the right way also if leds are installed backwards they wont light...

Thank you Bob, I will check the LED circuit again. 73. Griff NE3I Robert Alan Griffiths

Thanks Dave, I will check it out. Griff NE3I Robert Alan Griffiths

Robert, I also just built the 4S tuner and had similar problems to what you described. I found that the wires from switch SW1 were touching the switch body (the metallic part) thus shorting the XCVR

Sounds like bad solder joint around led circuit as seems tuner part is working and noise will not be as loud in tune mode as it is with tuner out.

I have built several tuners using a led as a indicator. Works ok with my 1/2 watt rigs. 72 George/W2BPI

Opened up 4SQRP lastest Kit. "Murania AM Broadcast Band Receiver". Wow this is a great beginners kit. If they are old enough to read instructions, and you help them a little on soldering they will