There are some files with mods. One suggested replacing the gain pot with one with a switch. That would have involved running wires from the back panel area, and I was reluctant to do that, as I

Yes very good idea having a larger tuning knob and an on/off power switch is a great idea .I hate having to disconnect the battery leads or pull out the power connector each time I am finished. Not

OK, pick away...I also replaced the stock tuning knob with a larger one, which helps a lot. Sent from my iPad

Terrible propagation on 40m ? Last night managed several 6600 km reports on WSPR running 150 milliwatts to my vertical -- all directions. true - close-in propagation can be rather directional - but

Hi Paul, Thanks for getting back to me on the KN-Q7A. With a struggle I managed the SMT transistor . It's too bad propagation on 40 is terrible at the present. Still have the transmit part to

I built one a couple of years ago. Due to inexperience, had to get some help on installing the small SMT driver transistor. Otherwise fine. I did put a SPST switch for power on back panel. Tuning is a

Sent from my Huawei Mobile johncronhelm <johncronhelm@...> wrote:

Thanks Norm, Got the receiver built andworking Transmit will be more of a challenge was thinking of adding a Frequency Mite. Regards, John vo1jcc. Sent from my Huawei Mobile "Norm Lee marjannorm@...

Sent from my Huawei Mobile "landrjoh@... [4sqrp]" <4sqrp@...> wrote: Hi John, I'm just getting ready to start assembling a CS-40 (40 meter band), which is basically the same

Hi! Yes, I have built the KN-Q7A rig. The dds vfo came as an extra and I installed that as well. To be quite honest, it is a ho-hum kind of rig. It worked, but there are a swag of better rigs

Hi John, I'm just getting ready to start assembling a CS-40 (40 meter band), which is basically the same as your KN-Q7A but with a digital VFO added. There's a Yahoo group covering the KN-Q7A and

Has anyone out there built the KN-Q7A ssb qrp transceiver 10watts? I am in the middle of building the kit. Interested in comparing notes Thanks, John, Vo1jcc.

Still looking for one of the SS40 receivers. Either built or an inbuilt kit that someone has that they no longer use. I've located a transmitter kit and this will allow me to continue my current DDS

Those are a lot of requirements, not sure any existing radio will achieve all any better than the 817 you already own or the MTR which you owned. I love my K1-4, but those are no longer made and

I had a problem where it would not let me login also, I ended changing my password and it worked after that. -- Cecil - k5nwa http://thepartsplace.k5nwa.com/

Hello Terry. Yes, I got the same error last time I tried to log in (about a week ago). I gathered that since Verizon had bought Yahoo they were just incorporating the data so

I really like my HB1B. It is great for portable use as well as a fun base station Wayne N9EGT

I almost forgot to remind everyone to send in their score as soon as possible. Assuming I don't forget, I'll tabulate everything Wednesday morning and report the results later that day. I'm really

See this article. https://forums.yahoo.net/t5/Account-security/Why-do-I-get-this-Manage-Accounts-page-at-Login/td-p/253179 72 Ron AG1P

Worked a couple 4 Staters last night on 7.122 (approximately)  KV6Z, W2SH, AC0BQ and W0MQY though not necessarily in that order.  I was using the "Chickenhawker" both barefoot @ 5 watts and with