It is www.tinyletter.com/thecodecircle

Nothing shows on the page except "Page not available" Chas NK8O

Nice job, Jeremy! As Dale said, great read !Thanks 72 Johnny AC0BQ -- QRP....."more smiles per watt" 72 JOHNNY AC0BQ ..

Great comments, opinions and suggestions! Keep the information coming! I was more concerned with antenna use, but points regarding the use of RCA plugs for power are certainly valid and, I must

I have a *big* safety concern about the practice of using RCA jacks for DC power *inputs*. If the plug is disconnected and allowed to lounge about on the workbench, that plug is subject to

The physical length any connector is so short compared to any HF wavelength that you will not see any impedance discontinuities due to that connector. And if you were to "run the numbers" anyway for

A lot of things depend upon details. A transmission line is warranted when the electrical length is such that the signal phase in degrees has changed a lot. Notice I am not being very numeric but

I've seen RCA plugs used on the ends of RG-58 or RG-8X coax before. That at least means 50 ohm cable, even if the RCA plug/socket does have a blip of a different impedance. I think audio cable is

Don, Interesting information. One of the things that prompted my question was the fact that I couldn't find any normal coax cables with RCA ends. Made me wonder about all those RCA jacks I'm seeing

They can also be used with 50 ohm coaxial cable/ 73, Bill KU8H

Jim, I would hesitate to use audio cables in RF coax applications - period. The only exception would be for temporary test use. As you mention, both the shielding and the

I am not going to get too involved in this discussion because there is a HUGE amount of latitude, theories, thoughts, myths, and positions. However RCA type plugs and cables have not

Many of the QRP kits and home brew transmitters (and receivers?) use RCA jacks and plugs for various connections, including power, keys, and antennas, I suppose because they are compact , cheap and

Congrats and Great job, Jeremy. Thank you for taking the Banner to new heights! 72/73, ............Walter . K5EST............ .....Amateur Radio Station..... Elecraft KX3 - Yaesu FT-817

The newsletter is looking good Jeremy.......... unc Phil, W0XI 'Jeremy Utley' jerutley@... [4sqrp] wrote:

GM Jeremy, Nicely done Banner! Thanks! 72,Rich K8MEG

Great news letter Jeremy, You are off to a good start. Tnx and cul de Paul N0NBD

Hi Jeremy, Great issue.. good read, cover to cover. Thank you for your very productive labor of love!! Have a great day, --... ...--Dale - WC7S in Wy To: 4sqrp@... From: 4sqrp@... Date:

Hey all! Since I expect the next couple of weeks to be pretty busy here, between work and preparing for Brutus, I decided to get the September issue of the Banner up nice and early this month!

GA AJ, "my New Used rigs coming will go down to 10 watts, can i still check in with that ?" Yes, of course, glad to have you check in with it. -- 72 WAØITPI love this radio