Date   

Upcoming Event: Wednesday Evening 40 and 80 meter Nets - Wed, 08/21/2019 8:00pm-9:00pm #cal-reminder

main@4SQRP.groups.io Calendar <main@...>
 

Reminder: Wednesday Evening 40 and 80 meter Nets

When: Wednesday, 21 August 2019, 8:00pm to 9:00pm, (GMT-05:00) America/Chicago

Where:40 and 80 Meters

View Event

Organizer: jomatlock@...

Description: The 40 Meter Net will be at 8:00 pm DST central time  on 7.122 +-. QRM
NCS is WQ5RP Terry.

Wednesday evening 80 Meter CW Net. will be at  (8:30PM Central DST Time Wednesday). 
The 80 meter net will be called on 3.564 MHz +/- QRM.
Net control operators are Johnny AC0BQ or Paul N0NBD.

* NEW *  Wednesday evening DMR Voice Net will be at (Thursday) 0300 UTC (9:00PM Central Time Wednesday/)
Four States QRP has a Brandmeister DMR Talk Group (TG31654). Join us to discuss QRP, ask questions, or just ragchew. The Wednesday net is a directed net  but any other time you may use the Talk Group to chat with other QRPers.
Net Control operator is Bert NØYJ.


Kenwood 520s vfo

Ross Henderson
 

Does anyone have a cable for a Kenwood 520s vfo? Please contact me. 72/73


Re: Keyer for a Ten Tec Rebel

Gwen Patton
 


On Mon, Aug 19, 2019 at 8:00 PM Gwen Patton <ardrhi@...> wrote:
Craig, it looks like I was right. There's code out there to add a keyer to the radio's firmware. The Rebel mailing list is probably worth joining, and there's a modified codebase for it over on Github.


This might be a good way to get a keyer for that radio without resorting to external hardware. If you decide to go that route, make sure you DOWNLOAD and SAVE the code already in the radio, so you can re-upload it to the rig should you need it.

73,
Gwen, NG3P

On Mon, Aug 19, 2019 at 7:48 PM Paul Smith <n0nbd@...> wrote:
I have in my roll top station probably 10 keyers i have built. By far my favorite is the 4SQRP EZ keyer... easy build, the 3 memories work great and the price is good.
YMMV. de Paul N0NBD
Building on the popular EZKeyer and EZKeyer II, this third generation very capable Morse Code keyer has some additional features - a beautiful new easy building enclosure, a smaller footprint, new PIC microcontroller, Speed Pot, larger message memories, new printed circuit board layout, and large push button switches.All connectors, switches, the speed pot, and components are board mounted ...

Sent from Outlook


From: main@4SQRP.groups.io <main@4SQRP.groups.io> on behalf of K0CSL <craigk0csl@...>
Sent: Monday, August 19, 2019 9:58 PM
To: main@4SQRP.groups.io <main@4SQRP.groups.io>
Subject: [4SQRP] Keyer for a Ten Tec Rebel
 
I recently purchased a used Ten Tec 506 Rebel, thinking it would be to fun to experiment with as I continue to hone my CW skills.  Unfortunately, I don’t have a keyer to go with it.  I’ve never used a stand-alone keyer before, so I could use some assistance.  Any recommendations?  Are there any products I should avoid?

73,

Craig Long - K0CSL



--

-+-+-+-+-
Jenny Everywhere's Infinite: Quark Time
http://quarktime.net


--

-+-+-+-+-
Jenny Everywhere's Infinite: Quark Time
http://quarktime.net


Re: Keyer for a Ten Tec Rebel

Gwen Patton
 

Craig, it looks like I was right. There's code out there to add a keyer to the radio's firmware. The Rebel mailing list is probably worth joining, and there's a modified codebase for it over on Github.


This might be a good way to get a keyer for that radio without resorting to external hardware. If you decide to go that route, make sure you DOWNLOAD and SAVE the code already in the radio, so you can re-upload it to the rig should you need it.

73,
Gwen, NG3P

On Mon, Aug 19, 2019 at 7:48 PM Paul Smith <n0nbd@...> wrote:
I have in my roll top station probably 10 keyers i have built. By far my favorite is the 4SQRP EZ keyer... easy build, the 3 memories work great and the price is good.
YMMV. de Paul N0NBD
Building on the popular EZKeyer and EZKeyer II, this third generation very capable Morse Code keyer has some additional features - a beautiful new easy building enclosure, a smaller footprint, new PIC microcontroller, Speed Pot, larger message memories, new printed circuit board layout, and large push button switches.All connectors, switches, the speed pot, and components are board mounted ...

Sent from Outlook


From: main@4SQRP.groups.io <main@4SQRP.groups.io> on behalf of K0CSL <craigk0csl@...>
Sent: Monday, August 19, 2019 9:58 PM
To: main@4SQRP.groups.io <main@4SQRP.groups.io>
Subject: [4SQRP] Keyer for a Ten Tec Rebel
 
I recently purchased a used Ten Tec 506 Rebel, thinking it would be to fun to experiment with as I continue to hone my CW skills.  Unfortunately, I don’t have a keyer to go with it.  I’ve never used a stand-alone keyer before, so I could use some assistance.  Any recommendations?  Are there any products I should avoid?

73,

Craig Long - K0CSL



--

-+-+-+-+-
Jenny Everywhere's Infinite: Quark Time
http://quarktime.net


Re: Keyer for a Ten Tec Rebel

Paul Smith
 

I have in my roll top station probably 10 keyers i have built. By far my favorite is the 4SQRP EZ keyer... easy build, the 3 memories work great and the price is good.
YMMV. de Paul N0NBD
Building on the popular EZKeyer and EZKeyer II, this third generation very capable Morse Code keyer has some additional features - a beautiful new easy building enclosure, a smaller footprint, new PIC microcontroller, Speed Pot, larger message memories, new printed circuit board layout, and large push button switches.All connectors, switches, the speed pot, and components are board mounted ...
www.4sqrp.com

Sent from Outlook


From: main@4SQRP.groups.io <main@4SQRP.groups.io> on behalf of K0CSL <craigk0csl@...>
Sent: Monday, August 19, 2019 9:58 PM
To: main@4SQRP.groups.io <main@4SQRP.groups.io>
Subject: [4SQRP] Keyer for a Ten Tec Rebel
 
I recently purchased a used Ten Tec 506 Rebel, thinking it would be to fun to experiment with as I continue to hone my CW skills.  Unfortunately, I don’t have a keyer to go with it.  I’ve never used a stand-alone keyer before, so I could use some assistance.  Any recommendations?  Are there any products I should avoid?

73,

Craig Long - K0CSL


Re: Keyer for a Ten Tec Rebel

Gwen Patton
 

Given it's Arduino-based, I wonder if there might be a sketch that could be added to the existing codebase for it to add keyer capability? There's a number of Arduino-based keyer sketches out there, but I don't know how adding it would be done, or even if there's room in the Uno board inside the radio.

There's any number of YACK (Yet Another CW Keyer) units out there, though, that could be set up externally, or even inside the case, wired to the key jack. I have a couple, a YACK keyer I haven't built yet from Ebay, another that I got from Electro-Resales that I use as a code oscillator connected to my computer's line in jack, a Nanokeyer, and an extremely tiny board I bought pre-built from Kit-Projects.com. 

Electro-Resales:

The other YACK keyer I bought Ebay was from Possumlodge, but he doesn't list it anymore.

Kit-Projects:
He had a predrilled case for it as a separate product, but looks like he's out. He has a touch keyer, with touch paddles, and a case, but that may not be to your liking. I built this board into a cheap 100x60x25 mm project box I got on Amazon. It's big enough for the board and a 9v battery to power it. I put the piezo buzzer on the bottom of the case under the board, with a hole drilled for the sound to escape. With little rubber feet on the bottom, there's plenty of open space for the sidetone sound to get out clearly if you use the sidetone on the keyer. I turn it off when I use it with any rig that has sidetone already, and turn it on when I use one that doesn't have sidetone.

All of these are VERY inexpensive options save one, the Nanokeyer:

This one costs, basic kit form, $44 Euros. It doesn't come with a case OR the Arduino Nano it uses as its brains. You might want to use different buttons depending on the case you get, and not mount the buttons it comes with on the PCB. I did, and I'm thinking of desoldering them and adding buttons on wires, to give me more case options. The Nano you can get on Amazon for a few bucks, the Chinese clones are dirt cheap. I bought 10 of 'em for $20 a couple of years ago, and just used one of those. Worked fine. So you have to supply case and processor, and additional hardware depending on how you enclose it. It's the most expensive option of the keyers I bought, and they all work fine.

Last keyer I have is an old Super CMOS III built into the Lucite dust cover for a Bencher BY-2 paddle. I bought the paddle AND the cover with the keyer already installed at a hamfest for $80 around 15 years ago when I got my General. They don't make 'em anymore. I still use that keyer with the Bencher from time to time. I just replace the batteries and it keeps on plugging.

I've also got a tiny 80m Tixie transceiver, a modification of a Pixie circuit that incorporates a TICK keyer chip. Unfortunately, TICK chips are no longer made either. It's a shame, they were great little keyers. There's probably other similar devices available now, but I have no experience with them.

Hope this helps. If I can give any further advice about any of them, just drop me a note. I use the Kit-Projects keyer with my portable QRP rigs that don't have keyers in them. But most of my rigs have keyers, like my Small Wonder Labs DSW-20, my QCX, my KX3, and some others I probably missed. But the Crickets and my IQ32 don't have keyers, so it was worth the $16 or so I paid for it.

73,
Gwen, NG3P

On Mon, Aug 19, 2019 at 7:20 PM K0CSL <craigk0csl@...> wrote:
I recently purchased a used Ten Tec 506 Rebel, thinking it would be to fun to experiment with as I continue to hone my CW skills.  Unfortunately, I don’t have a keyer to go with it.  I’ve never used a stand-alone keyer before, so I could use some assistance.  Any recommendations?  Are there any products I should avoid?

73,

Craig Long - K0CSL



--

-+-+-+-+-
Jenny Everywhere's Infinite: Quark Time
http://quarktime.net


Re: #BRUTUS Reservations at Brutus? #BRUTUS

Paul Smith
 

Hey Johnny,
Leslie told me tonight we could go camp in the grass by the pavilion if it is not too hot. otherwise we will be there for the Saturday festivities. What food will we need to procure for the vittles? i can live on coffee, jerkey and ramen noodles when needed hi hi
de Paul

Sent from Outlook


From: main@4SQRP.groups.io <main@4SQRP.groups.io> on behalf of Johnny Matlock <jomatlock@...>
Sent: Monday, August 19, 2019 10:04 PM
To: main@4sqrp.groups.io <main@4sqrp.groups.io>
Subject: Re: [4SQRP] #BRUTUS Reservations at Brutus?
 
I will call Tomorrow and see if I can reserve the pavilion.
Will let u all know.
73
Johnny AC0BQ 

On Mon, Aug 19, 2019 at 4:43 PM Paul Smith <n0nbd@...> wrote:
I still dont have a commitment from my sons. I wanted to pitch my tent in the grass by the pavilion where the restrooms and water are handy. de Paul

Sent from Outlook


From: main@4SQRP.groups.io <main@4SQRP.groups.io> on behalf of wg5f@... <wg5f@...>
Sent: Monday, August 19, 2019 8:22 PM
To: main@4SQRP.groups.io <main@4SQRP.groups.io>
Subject: Re: [4SQRP] #BRUTUS Reservations at Brutus?
 
Karen said that Pam might have already paid them, last year, for the Pavilion for 2019???

--
Check out the 4SQRP website at 4sqrp.com


Keyer for a Ten Tec Rebel

K0CSL <craigk0csl@...>
 

I recently purchased a used Ten Tec 506 Rebel, thinking it would be to fun to experiment with as I continue to hone my CW skills.  Unfortunately, I don’t have a keyer to go with it.  I’ve never used a stand-alone keyer before, so I could use some assistance.  Any recommendations?  Are there any products I should avoid?

73,

Craig Long - K0CSL


Re: #BRUTUS Reservations at Brutus? #BRUTUS

Johnny AC0BQ
 

I will call Tomorrow and see if I can reserve the pavilion.
Will let u all know.
73
Johnny AC0BQ 

On Mon, Aug 19, 2019 at 4:43 PM Paul Smith <n0nbd@...> wrote:
I still dont have a commitment from my sons. I wanted to pitch my tent in the grass by the pavilion where the restrooms and water are handy. de Paul

Sent from Outlook


From: main@4SQRP.groups.io <main@4SQRP.groups.io> on behalf of wg5f@... <wg5f@...>
Sent: Monday, August 19, 2019 8:22 PM
To: main@4SQRP.groups.io <main@4SQRP.groups.io>
Subject: Re: [4SQRP] #BRUTUS Reservations at Brutus?
 
Karen said that Pam might have already paid them, last year, for the Pavilion for 2019???

--
Check out the 4SQRP website at 4sqrp.com


Re: #BRUTUS Reservations at Brutus? #BRUTUS

Paul Smith
 

I still dont have a commitment from my sons. I wanted to pitch my tent in the grass by the pavilion where the restrooms and water are handy. de Paul

Sent from Outlook


From: main@4SQRP.groups.io <main@4SQRP.groups.io> on behalf of wg5f@... <wg5f@...>
Sent: Monday, August 19, 2019 8:22 PM
To: main@4SQRP.groups.io <main@4SQRP.groups.io>
Subject: Re: [4SQRP] #BRUTUS Reservations at Brutus?
 
Karen said that Pam might have already paid them, last year, for the Pavilion for 2019???


Chasing NK8O via Digital

Ed Meyer, WG5F
 

Please, don't tell me to go to the KX3 forums or the JT8 Forums... 
They just tend to get too confusing at times. 
I want to try and chase NK8O, Charles, around Tanzania when he tries to get on FT8, PSK-31 over the next couple of weeks. 
(I can use PSK31 directly with the KX3 with no problems.)
If you're running FT8 with your KX3, using a windows laptop, tell me what you've done to make the magic happen.   
I don't have a Mac Book. 
I don't have a USB sound card/dongle.
I do have an old Tigertronics USB interface in a drawer somewhere...
I do have one of the 4S-Link interfaces.
I do have the Elecraft cable set.
If you have a link to a good article or want to guide me (and maybe some other 4-staters) thru it, lemme know.
Thanks!
72,
-Ed, WG5F-


Re: #BRUTUS Reservations at Brutus? #BRUTUS

Ed Meyer, WG5F
 

Karen said that Pam might have already paid them, last year, for the Pavilion for 2019???


Re: Nouveau 75 Help needed

Chris Howard w0ep
 

I have a microscope and am willing to help. I don't think I am a good first choice. But if it comes down to me or nothin', you've got me.

Chris Howard
W0EP
Recently moved back to Zero land.
Dubuque, IA


Sent from BlueMail

On Aug 18, 2019, at 15:22, Bill VanKirk <bvkirk@...> wrote:
Would any of the 4state builders be available to take a look at my Nouveau 75? It has a problem and I can't figure it out. The audio is distorted so bad on receive stations can not be copied. SMD is beyond my skill level and I don't want to destroy this trying. I will be willing to pay someone for their time to get this going. Help anyone?

73
Bill
4sqrp #201


Re: Nouveau 75 Help needed

cornhusker
 

The problem is being worked on.  Just hang on for a solution soon.  I had same issue.  
73 de K0NEB 


On Sun, Aug 18, 2019 at 4:22 PM, Bill VanKirk
<bvkirk@...> wrote:
Would any of the 4state builders be available to take a look at my Nouveau 75? It has a problem and I can't figure it out. The audio is distorted so bad on receive stations can not be copied. SMD is beyond my skill level and I don't want to destroy this trying. I will be willing to pay someone for their time to get this going. Help anyone?

73
Bill
4sqrp #201


Nouveau 75 Help needed

Bill VanKirk
 

Would any of the 4state builders be available to take a look at my Nouveau 75? It has a problem and I can't figure it out. The audio is distorted so bad on receive stations can not be copied. SMD is beyond my skill level and I don't want to destroy this trying. I will be willing to pay someone for their time to get this going. Help anyone?

73
Bill
4sqrp #201


Re: WTB ZZ RX 40

tom martin <tecnician@...>
 




On Aug 18, 2019, at 9:14 AM, Jim Long <jphiliplong@...> wrote:

want to buy an unbuilt zz rx 40.  kit if u have one


Jim
WW9H


Re: Ozark Banner

Tom Sevart
 

Good article on 10m E-skip in the Banner. The idea of listening to the 28.200-.300 beacon band is a great idea to see when the band is open, as well as the popular 10-10 freq. I operate a 10m beacon on 28.2095 and it's always interesting to see where my beacon's being heard. And one trick I often use is to listen for skip on the 11 meter CB band, 27.025 in particular. When I hear signals there, I'll move up to 10m. And so far with all the rain and storms we've had this summer, seems like E-skip has been pretty active.


--
Tom Sevart N2UHC
St. Paul, KS


WTB ZZ RX 40

Jim Long
 

want to buy an unbuilt zz rx 40.  kit if u have one


Jim
WW9H


Re: Very Nice Banner

Walter - K5EST
 

Perfect Banner, thank you Keith!  The taking care of the portable mast should be on every QRPer's reading list!
73,

Walter Dufrain - K5EST - QRPcw
.....  Four St@te QRP Group   ....
......... St Louis QRP Society .......


On Sat, Aug 17, 2019 at 9:20 PM Tom Brown <tbrown63301@...> wrote:
Enjoyed reading the Banner. Tnx Keith for a really nice edition. I missed the presentation about the masts at OCon because I was taking care of some business so really enjoyed reading the write up. 
Tom W0MFQ


Very Nice Banner

Tom Brown
 

Enjoyed reading the Banner. Tnx Keith for a really nice edition. I missed the presentation about the masts at OCon because I was taking care of some business so really enjoyed reading the write up. 
Tom W0MFQ