|
Re: 40 and 80 meter net report
Well Johnny, it wasn’t because we didn’t try ! Hate to sound like a broken record but I worked the dial s-l-o-w-l-y around 7.122 and occasionally some part of a letter would pop up at then at 2:18 into the Net there was a very short burst of super loud CW and before I could zero in it was gone.
toggle quoted messageShow quoted text
While 80m was better all but short bursts were under my noise, which was not terrible tonight. If I had never worked Washington State and Northern Maine with 5w I would question if this was even possible ? For me, I can only say thanks for being there and giving me real practice. 73, John
On Jan 15, 2020, at 22:02, Johnny Matlock <jomatlock@...> wrote:
|
|
|
|
Delta Mike Romeo Net
Robert
Thanks to all who checked in tonight. WG5F - Ed NK8O -- Charles AC0BQ -- Johnny W8NWA -- Mike K0EMT -- Bryan N0S0 -- Mike KU5M -- Joe 73's Bert N0YJ See ya next week!
|
|
|
|
40 and 80 meter net report
Ge group No contacts on 40 meters. 80 Meters was better. K4BAI JOHN N4MJ GLENN We had a lot of competition from the NAQCC sprint tonight. They were all over the place! 72 Johnny AC0BQ QRP....."More smiles per Watt" JOHNNY AC0BQ ..72
|
|
|
|
Re: Wednesday Evening 40 and 80 meter Nets - Wed, 01/15/2020
#cal-notice
80 Meter net is at 3.564.5 I have qrm at 3.564 Tnx Johnny AC0BQ
On Wed, Jan 15, 2020 at 8:11 PM Johnny Matlock via Groups.Io <jomatlock=gmail.com@groups.io> wrote:
--
QRP....."More smiles per Watt" JOHNNY AC0BQ ..72
|
|
|
|
Re: Wednesday Evening 40 and 80 meter Nets - Wed, 01/15/2020
#cal-notice
No Joy on 40 meters yet? I am at 7.122 QRL Johnny AC0BQ
--
QRP....."More smiles per Watt" JOHNNY AC0BQ ..72
|
|
|
|
Wednesday Evening 40 and 80 meter Nets - Wed, 01/15/2020
#cal-notice
main@4SQRP.groups.io Calendar <noreply@...>
Wednesday Evening 40 and 80 meter Nets When: Where: Organizer: Description:
|
|
|
|
Re: FW: Bayou Jumper Souper Upper Kit Installation Help
Mike, I built and installed one of those for another ham and could do it for you. No cost except for postage each way. And a bit of patience as it might take a couple of weeks. If interested, drop me me a line directly. 73 Bob Groh, WA2CKY Blue Springs, MO. 64014
On Tue, Jan 14, 2020 at 1:19 PM Mike Scheidt <N0XM@...> wrote: I would like to hire someone (ideally someone who has installed this kit
|
|
|
|
Upcoming Event: Wednesday Evening 40 and 80 meter Nets - Wed, 01/15/2020 8:00pm-9:00pm
#cal-reminder
main@4SQRP.groups.io Calendar <main@...>
Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 15 January 2020, 8:00pm to 9:00pm, (GMT-06:00) America/Chicago Where:40 and 80 Meters Organizer: jomatlock@... Description: The 40 Meter Net will be at 8:00 pm central time on 7.122 +-. QRM
|
|
|
|
Upcoming Event: Wednesday Evening 40 and 80 meter Nets - Wed, 01/15/2020 8:00pm-9:00pm
#cal-reminder
main@4SQRP.groups.io Calendar <main@...>
Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 15 January 2020, 8:00pm to 9:00pm, (GMT-06:00) America/Chicago Where:40 and 80 Meters Organizer: jomatlock@... Description: The 40 Meter Net will be at 8:00 pm central time on 7.122 +-. QRM
|
|
|
|
Re: FW: Bayou Jumper Souper Upper Kit Installation Help
Rick Nelson
Hi, Mike,
toggle quoted messageShow quoted text
Thanks for your email. I’m afraid though that I’m not the one to ask—I have not added the “Souper Upper” kit to my own Bayou Jumper. The only Soupping Up” I’ve done is to add the Nextion Color Display to my uBITX. You might be able to find someone who has already done this by checking on the EHAM review page. It would be much easier to find someone who has already performed this procedure to do it a second time. BTW, drilling through the faceplate with an electric drill...starting with a smaller bit and holding the drill still... should be no problem. I have done that myself to add a second keying lamp to the faceplate. Good luck! 73’s, Rick
On Jan 14, 2020, at 2:19 PM, Mike Scheidt <N0XM@cox.net> wrote:
|
|
|
|
Re: FW: Bayou Jumper Souper Upper Kit Installation Help
Ronald Morrison
Contact Dale, WC7S in WY
On Tuesday, January 14, 2020, 01:19:40 PM CST, Mike Scheidt <n0xm@...> wrote:
I would like to hire someone (ideally someone who has installed this kit into a Bayou Jumper already) to complete the final steps in me adding the "Souper Upper" kit to my Bayou Jumper. I've completed the board for the kit, but I don't feel confident enough to complete the internal mounting of the board, wiring the same, and most importantly, accurately drilling through the face of the Bayou Jumper. I have only one non-standard item on my Bayou Jumper, in that, please note it has a Vernier tuning dial, which has helped me a great deal in selecting the received frequency. I don't believe it will preclude the Souper Upper kit items to be installed as intended. I'll obviously pay shipping both ways, and I'd appreciate an approximate dollar estimate to install the Souper Upper kit. Lastly, I'm not in a particular rush. Thanks in advance for considering my request for assistance. N0XM Mike
|
|
|
|
FW: Bayou Jumper Souper Upper Kit Installation Help
Mike Scheidt
I would like to hire someone (ideally someone who has installed this kit
into a Bayou Jumper already) to complete the final steps in me adding the "Souper Upper" kit to my Bayou Jumper. I've completed the board for the kit, but I don't feel confident enough to complete the internal mounting of the board, wiring the same, and most importantly, accurately drilling through the face of the Bayou Jumper. I have only one non-standard item on my Bayou Jumper, in that, please note it has a Vernier tuning dial, which has helped me a great deal in selecting the received frequency. I don't believe it will preclude the Souper Upper kit items to be installed as intended. I'll obviously pay shipping both ways, and I'd appreciate an approximate dollar estimate to install the Souper Upper kit. Lastly, I'm not in a particular rush. Thanks in advance for considering my request for assistance. N0XM Mike
|
|
|
|
SSS Results
John Lonigro
Well, 2020 started off with a whimper, for sure. We had 9 people bother to tabulate their scores, even though four of them had a score of zero. The highest score for January was Carl, WB0CFF, with a whopping 6 points. When Carl only manages 3 QSOs, you know the bands must be in bad shape. There were four entries with 2 points, so we have a four way tie for 2nd place.
Let's hope things are looking better in February. Congratulations Carl. You will receive your January certificate shortly, after I walk the dog... 72, John, AA0VE 4SQRP Contest Coordinator
|
|
|
|
Re: 4SQRP Second Sunday Sprint - Sun, 01/12/2020
#cal-notice
That's sage advice. In the future I'll move away from 7.122. Sorry if i was one of the offenders.
toggle quoted messageShow quoted text
With the bands so silent, and hearing nothing, it never occurred to me...
On Jan 13, 2020, at 12:30 PM, Carl Gansen <wb0cff@gmail.com> wrote: --
Jeff N0̷MII
|
|
|
|
Upcoming Event: Wednesday Evening 40 and 80 meter Nets - Wed, 01/15/2020 8:00pm-9:00pm
#cal-reminder
main@4SQRP.groups.io Calendar <main@...>
Reminder: Wednesday Evening 40 and 80 meter Nets When: Wednesday, 15 January 2020, 8:00pm to 9:00pm, (GMT-06:00) America/Chicago Where:40 and 80 Meters Organizer: jomatlock@... Description: The 40 Meter Net will be at 8:00 pm central time on 7.122 +-. QRM
|
|
|
|
Re: [For sale] 4SQRP Hilltopper 20
Bryan Nehl
SOLD!
On Monday, January 13, 2020, 12:09:20 PM CST, Bryan Nehl <k0emt@...> wrote:
Unbuilt 4SQRP Hilltopper 20 with K1SWL performance mod kit and custom programmed chip for 600Hz side tone $110 -- US shipping included, I accept PayPal 72 de Bryan, k0emt
|
|
|
|
Re: OT: FS: Used Older iPAD
This was spoken for even before the message got sent out by groups.io Sorry. W0EB
------ Original Message ------
From: "Jim Sheldon" <w0eb@...>
To: "4SQRP Mailing List" <4SQRP@groups.io>
Sent: 1/13/2020 1:13:03 PM
Subject: [4SQRP] OT: FS: Used Older iPAD I have an older (I believe 4th generation - first one with the "Retina" display) iPAD available if anyone is interested. (My wife bought me a new Gen 7 version.) It has 16 gigs of memory which is a little small by today's standards but it you don't put too many apps on it, it will work just fine. It still holds a charge and will come with the charger and a new, much longer, "Lightning" cord. The only problem with it is the iPAD's "Lightning" cord input jack is a little worn and you sometimes have to make sure that good contact is made when plugging it in to recharge.
|
|
|
|
Re: OT: FS: Older iPAD
The old iPAD has been spoken for already.
W0EB
|
|
|
|
OT: FS: Used Older iPAD
I have an older (I believe 4th generation - first one with the "Retina" display) iPAD available if anyone is interested. (My wife bought me a new Gen 7 version.) It has 16 gigs of memory which is a little small by today's standards but it you don't put too many apps on it, it will work just fine. It still holds a charge and will come with the charger and a new, much longer, "Lightning" cord. The only problem with it is the iPAD's "Lightning" cord input jack is a little worn and you sometimes have to make sure that good contact is made when plugging it in to recharge.
There are no cracks in the screen or case and it comes with a leather protective cover that's still serviceable though it has seen better days. I've wiped all personal and app data from it and it comes up wanting a new owner to take it over. Original cost, some 7 or 8 years ago was just over $500. I'd like to get $90 out of it (via PayPal only, no checks or money orders) and that will include shipping to anywhere in the US. Please contact me off list if interested (w0eb at cox.net) to keep the clutter down on the reflector. Jim Sheldon, W0EB
|
|
|
|
Submit your SSS Score
John Lonigro
Don't forget to enter your Second Sunday Sprint score at qrpcontest.com today. I hope to tabulate everything in the morning.
72, John, AA0VE 4SQRP Contest Coordinator
|
|
|
